VIVO MOUNT-KB05HW Large Height Adjustable Under Desk Keyboard Tray Instruction Manual
- June 15, 2024
- Vivo
Table of Contents
VIVO MOUNT-KB05HW Large Height Adjustable Under Desk Keyboard Tray
Instruction Manual
Scan the QR code with your mobile device or follow the link for helpful videos
and specifications related to this product.
https://vivo-us.com/products/mount-kb05hb
WARNING!
If you do not understand these directions, or if you have any doubts about the
safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this
product for any purpose that is not explicitly specified in this manual. Do
not exceed weight capacity. We cannot be liable for damage or injury caused by
improper mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED
PACKAGE CONTENTS
-
A (x1)
Keyboard Tray -
B (x2)
Slider Bracket -
C (x2)
Clamp -
D (x2)
Support Bracket -
E (x2)
Pad -
S-A (x6)
M4x7mm Screws -
S-B (x8)
M5x12mm Screws -
S-C (x6)
M5x8mm Screws
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
TOOLS NEEDED
Phillips Screwdriver
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury
ASSEMBLY STEPS
STEP 1
Assemble Slider Brackets (B) to the Support Brackets (D) using M4x7mm Screws
(S-A), making sure the countersunk holes on Support Brackets (D) are facing
outward, as shown below. Tighten with a Phillips screwdriver
NOTE: Clamp can be offset using the extra holes in Slider Brackets (B) to allow the tray to be pulled out an extra 1.2” (30mm) when in use. If mounted this way the tray will sit further out from desk edge.
STEP 2
Assemble Slider Brackets (B) with Support Brackets (D) to the Keyboard Tray
(A) using M5x12mm Screws (S-B), and tighten with a Phillips screwdriver. The
Support Brackets (D) must be on the opposite end from the center cable guide.
STEP 3
Assemble Clamps (C) to Support Brackets (D) at desired height using M5x8mm
Screws (S-C). Tighten with a Phillips screwdriver.
STEP 4
Place Pads (E) on the underside of each Clamp (C). Place assembled keyboard
mount on edge of desk and tighten clamps. NOTE: To ensure keyboard tray is
level, do not over-tighten clamps. Slide keyboard tray forward/back to desired
position.
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response
times. If any parts are received damaged or defective, please contact us. We
are happy to replace parts to ensure you have a fully functioning product.
309-278-5303 AVG.
RESOLUTION TIME (within office hrs): 5M 4S
www.vivo-us.com Chat live with an agent!
AVG. RESOLUTION TIME (within office hrs): < 15 M
help@vivo-us.com
AVG. RESPONSE TIME (within office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3h
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- Clamp-on Height Adjustable Keyboard Tray – VIVO - desk solutions, screen mounting, and more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>