FUFU GAGA 6508A04B LED Ceiling Fan Instruction Manual
- October 30, 2023
- FUFU GAGA
Table of Contents
FUFU GAGA 6508A04B LED Ceiling Fan
Product Information
- Model Number : 6508A04B
- Dimensions : 150 x 200 x 430 mm
- Weight : 210g
- Motor Type : DC Energy Saving Motor
- Fan Blade Type : 8 Plywood Fan Blade
- Control Type : 5-speed Remote Control with 1/4/8 Hour(s) Timer and Positive Inversion
Product Usage Instructions
- Before installation, turn OFF the electrical power at the main fuse of circuit breaker.
- Select the corresponding installation screw for installation based on the type of ceiling (wood or concrete).
- Match the fan blade hole to the fork and lock the screw as shown in the figure.
- Align the fork with the hole in the motor connecting plate and lock the screw to ensure that it is firm.
- Put the suspender into the upper cup, decorate the cover, and then thread the motor wire.
- Clip the suspender into the fan motor, then rotate it to align with the hole, insert the cross bolt screw, lock the R pin, and finally lock the two screws on the hanger head.
- Screw the decorative cover clockwise into the motor shaft as shown in the figure, and make sure it is firm.
- After hanging the fan suspender into the hanger, rotate and clip it into the groove, then connect the wires according to color, and finally put on the hanging cup. After rotating the hanging cup, lock the hanging cup screw.
- Restore the power at the main fuse or circuit breaker.
- Use the 5-speed remote control to adjust the fan speed and set the timer (1/4/8 hour(s)).
- The fan can be set to rotate in either a positive or negative direction using the remote control.
DIMENSIONS
FEATURES
- DC energy saving motor
- Massive size provide strong wind
- High quality
- 8 Plywood fan blade
- 5-speed remote control
- 1/4/8 hour(s) timer
- Positive inversion
PACKAGE CONTENTS
ASSEMBLY INSTRUCTIONS
- Turn OFF the electrical power at the main fuse of circuit breaker.
- According to the different installation ceiling, select the corresponding installation screw for installation
- Match the fan blade hole to the fork and lock the screw as shown in the figure.
- Then align the fork with the hole in the motor connecting plate and lock the screw to ensure that the screw is firm.
- According to the figure, put the suspender into the upper cup, decorate the cover, and then thread the motor wire.
- Clip the suspender into the fan motor, then rotate it to align with the hole, insert the cross bolt screw, lock the R pin, and finally lock the two screws on the hanger head.
- Screw the decorative cover clockwise into the motor shaft as shown in the figure, and make sure it is firm.
- After hanging the fan suspender into the hanger, rotate and clip it into the groove, then connect the wires according to the color, and finally put on the hanging cup. After rotating the hanging cup, lock the hanging cup screw
- Restore the power at the main fuse or circuit breaker.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>