Omix-Ada JK Spare Tire Light Mount User Manual
- June 15, 2024
- OMIX-ADA
Table of Contents
Omix-Ada JK Spare Tire Light Mount User Manual
Components
- Universal Bracket……………………..(1)
- Light Bracket…………………………….(1)
- License Plate Bracket……………….(1)
- Clevis Pin………………………………….(1)
- Safety Catch……………………………(1)
- M12 Flange Bolt………………………..(1)
- M12 Washer…………………………….(1)
- M12 Nylon Lock Nut…………………(1)
- M6 Flange Bolt…………………………(2)
- M6 Washer…………………………….(2)
- M6 Nylon Lock Nut…………………(2)
OMIX-ADA® TECHNICAL SUPPORT PHONE: M-F 8am – 5pm EST
1-800-449-6649 | EMAIL: techsupport
@omix-ada.com
FOR WARRANTY INFORMATION VISIT: www.Omix-Ada.com
Copyright © 2021 Omix-Ada®, Inc.
Spare Tire Light Mount, JK & JKU
-
Remove spare tire from vehicle and install the Universal Bracket.
-
Place the spare tire back on the vehicle and tighten lug nuts.
-
Install Light Bracket into the Universal Plate and insert the Clevis Pin. Be sure Safety Catch is looped over the pin for retention.
Note: The light bracket can be rotated 180° depending on your needs. -
Install your choice of light. If license plate relocation is desired, place License Plate Bracket between light and the Light Bracket. Make sure to tighten securely.
Note: If not using a light, use supplied M12 bolt, washer, and nylon lock nut to secure the License Plate Bracket to the assembly. -
If using the License Plate Bracket, use the supplied M6 bolt, washer, and nylon lock nut to attach the license plate to the License Plate Bracket
Copyright © 2021 Omix-Ada®, Inc.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>