OMIX-ADA 11238.06 Diameter Flashlight Bracket Kit Installation Guide
- June 13, 2024
- OMIX-ADA
Table of Contents
**OMIX-ADA 11238.06 Diameter Flashlight Bracket Kit Installation Guide
**
Step 1: Locate a flat area with enough room to allow mounting of your
flashlight. Be sure to space the 2 brackets far enough apart to secure your
flashlight at each end.
Step 2: Once mounting location has been determined, mark the 4 holes to
be drilled.
Step 3: Using a ¼” drill bit, drill the 4 marked holes.
Caution: Before drilling, be sure there is nothing behind the area being
drilled that could possibly be damaged during drilling.
Step 4: Attach the flashlight brackets using the included phillips head
screws and nuts.
Step 5: Place your flashlight into the brackets. Installation of your new
1 ½” flash light bracket kit is now complete.
References
Read User Manual Online (PDF format)
Loading......