Grelife JDNFJ0001AGL PTC Space Heater User Guide
- June 15, 2024
- Grelife
Table of Contents
Grelife JDNFJ0001AGL PTC Space Heater
Remote Using Instructions
- Power ON/OFF
- Press once to turn on/off.
- Child Lock Function
- Long press for 3s to activate/inactive the child lock function.
- M. Mode / Heat Level Setting
- Press to switch from Low-High-ECO.
- Oscillation
- Press once to start/end 65° oscillation.
- -/+ Temperature Adjustment
- Press to adjust temperature from 60 to 89°F ( 1 6-32°C).
- Auto OFF Timer
- Set Timer: Press repeatedly to cycle through 01 to 12-hour timer.
- Note: Once set, the LED display will show the current temperature after flashing for 5s, and the red icon “H” lights up.
- Cancel Timer: Adjust the timer set to 00/Press twice when the LED displays the current room temperature.
- Note: If the red icon “H” lights off, the timer setting is cancelled successfully.
- °F/°C Switchable
- Long press the key on the remote for 2s to switch. You can also press and hold simultaneously”+” and “-” on the Led display to convert °F/°C.
Note
- When the set temperature is reached, the heater will stop working.
- When the room temperature is lower than the set one, the heater will start working again.
EASY TO INSTALL
- Step 1: Take out the heater body and parts from the box, put the front base and the rear base together. (Fig. 1)
- Step 2: Take out the screws from the PE bag. (Fig.2)
- Step 3: Pass the power cord through the wire hole, and then insert the heater body into the base. (Fig.3)
- Step 4: Fix the heater body and base with screws.
Need Help?
E-mail: support@grelife.net
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>