Grelife JDNFJ0002A-US PTC Space Heater User Guide
- June 14, 2024
- Grelife
Table of Contents
PTC SPACE HEATER
Quick Start Guide
JDNFJ0002A-US PTC Space Heater
Power ON/OFF
Press once to turn on/off.
Mode I Heat Level Setting
High/Low/ECO
Oscillation
Press to start 75° oscillation.
Temperature Adjustment
Adjust temperature from 60 to 90°F or timer from 1 to 12 hours.
Auto OFF Timer
Set the timer from 1-12 hours.
Ambient Light
Turn on/off the ambient light.
Child Lock Function
Long press to activate the child lock function.
Switchable
Press and hold + and – Buttons on the heater simultaneously for 3 seconds.
PS: When the set temperature is reached, the heater will stop working.
When the room temperature is lower than the set one, the heater will start
working again.
EASY TO INSTALL
Step 1. Take out the heater body and parts from the box. Cross butt the
bases.(Fig.1)
Step 2. Thread the power cord through the wire hole and join the heater body
and base together. (Fig.2)
Step 3. After aligning the buckle, turn it clockwise to lock the base. (Fig.3)
Need Help?
E-mail: support@grelife.net