ATEN VS182B VanCryst 2 4 Port True 4K HDMI Splitter User Guide

June 15, 2024
Aten

ATEN VanCryst™
VS182B / VS184B
2/4-Port True 4K HDMI Splitter
Quick Start Guide

 VS182B VanCryst 2 4 Port True 4K HDMI Splitter

ATEN VS182B VanCryst 2 4 Port True 4K HDMI Splitter

A Hardware Review

VS182B Front View

ATEN VS182B VanCryst 2 4 Port True 4K HDMI Splitter - Hardware Review
1VS184B Front ViewATEN
VS182B VanCryst 2 4 Port True 4K HDMI Splitter - Hardware Review
2VS182B Rear View
ATEN VS182B VanCryst 2 4 Port True 4K HDMI Splitter - Hardware Review
3VS184B Rear ViewATEN
VS182B VanCryst 2 4 Port True 4K HDMI Splitter - Hardware Review
4

Package Contents

1 VS182B/VS184B 2/4-Port True 4K HDMI Splitter
1 Power adapter
1 HDMI Cable
1 User Instructions

B Hardware Installation
ATEN VS182B VanCryst 2 4 Port True 4K HDMI Splitter - Hardware Review
5 Support and Documentation Notice
All information, documentation, fi rmware, software utilities, and specifi cations contained in this package are subject to change without prior notifi cation bythe manufacturer.
To reduce the environmental impact of our products, ATEN documentation and software can be found online at http://www.aten.com/download/
Technical Support www.aten.com/support
Scan for more informationhttp://www.aten.com/products/productItem.php?model_no=VS182B

EMC Information

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
FCC Caution : Any changes or modifi cations not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Warning: This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio interference.
Warning:Operation of this equipment in a residential environment could cause radio interference.
Suggestion: Shielded twisted pair (STP) cables must be used with the unit to ensure compliance with FCC & CE standards.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device mat not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.
The terms HDMI, HDMI High-Defi nition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Hardware Review

Front View

  1. Output Port LEDs
  2. Input Port LED
  3. Power LED

Rear View

  1. Power Jack
  2. HDMI Input Port
  3. EDID Switch
  4. HDMI Output Ports

Hardware Installation

  1. Use a Male-to-Male Type A HDMI cable to connect your computer or HDMI source device to the VS182B / VS184B HDMI input port.
  2. Use up to four Male-to-Male Type A HDMI cables to connect up to four HDMI display devices to the VS182B / VS184B Output ports.
  3. Plug the power adapter that came with the VS182B / VS184B package into an AC power source, and then plug the power adapter cable into the splitter’s power jack.
  4. Use the EDID switch to select EDID mode. EDID modes include Port 1, Default and Auto.

EDID Mode
Port 1
This mode applies the EDID data read from port 1 to all video sources.
Default
This mode applies Aten’s default EDID data to all video sources.
Auto
This mode reads mixed EDID data from all connected displays and generates optimum EDID for all sources.
Note:
The VS182B / VS184B will detect the resolution of the monitor connected to port  1 of the installation. If you would like to change the resolution, simply adjust thesettings from the HDMI source device confi guration menu.

© Copyright 2017 ATEN ® International Co., Ltd.
ATEN and the ATEN logo are trademarks of ATEN International Co., Ltd. All rights reserved. All
other trademarks are the property of their respective owners.
This product is RoHS compliant.
Part No. PAPE-1223-A50G
Printing Date: 02/2017
www.aten.com  ATEN VS182B VanCryst 2 4 Port True 4K
HDMI Splitter - Bar code

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals