VIVOTEK DESK-E-Y48SW Electric 2 Tier Height Adjustable Stand Up Desk Instruction Manual
- June 15, 2024
- Vivotek
Table of Contents
White 2 Tier 48″ x 24″ Mobile Electric Desk
Instruction Manual
DESK-E-Y48SW Electric 2 Tier Height Adjustable Stand Up Desk
SKU: DESK-E-Y48SW
Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product.
https://vivo-us.com/products/desk-e-y48sb
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
****help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the
safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts. Improper
installation may cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual and do not exceed
weight capacity. We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly, or inappropriate use.
**** ELECTRICAL SAFETY INSTRUCTIONS
THIS PRODUCT IS POWERED BY ELECTRICITY. IN ORDER TO AVOID BURNS, FIRE AND ELECTRIC SHOCK, PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY.
- DO NOT CLEAN PRODUCT WHILE POWER IS CONNECTED.
- DO NOT DISASSEMBLE OR REPLACE COMPONENTS WHILE POWER IS CONNECTED.
- NEVER OPERATE THE SYSTEM WITH A DAMAGED CORD OR PLUG. PLEASE CONTACT YOUR SELLER TO REPLACE DAMAGED PARTS.
- NEVER OPERATE SYSTEM IN DAMP ENVIRONMENTS OR IF ANY ELECTRICAL COMPONENTS HAVE MADE CONTACT WITH LIQUIDS.
- ALTERATIONS OF THE GIVEN POWER UNIT ARE NOT ALLOWED.
- OUTDOOR USE IS PROHIBITED.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
TOOLS NEEDED
DO NOT EXCEED WEIGHT CAPACITY
Failure to do so may result in serious injury.
ASSEMBLY STEPS
STEP 1
Place Front Desktop (C) and Back Desktop (D) upside down on a clean flat
surface. Insert Wooden Dowels (O) into the holes in both desktops and slide
them together. Use Connecting Plates (M) with ST4.2x15mm Screws (S-A) to
secure the desktop assembly. Mount Hooks (N) to the desktop assembly using
ST4.2x15mm Screws (S-A).
STEP 2
Assemble Crossbar (H) to Leg (A) and Motorized Leg (B) using M8x50mm Screw
(S-B) and 5mm Allen Wrench (T-B).
STEP 3
Mount Side Brackets (E) to the frame assembly using M8x16mm Screws (S-C) and
5mm Allen Wrench (T-B).
STEP 4
Place the frame assembly upside down and assemble Feet (F) to Leg (A) and
Motorized Leg (B) using M6x35mm Screws (S-D) and 5mm Allen Wrench (T-B).
STEP 5
If desired, the foot pads on Feet (F) can be replaced with Casters (S).
Unscrew the pads and thread Casters (S) onto Feet (F) using 14mm Wrench (T-A).
STEP 6
Place Tray (I) over Crossbar (H).
STEP 7
Loosen the knobs on Sync Rod (G) using 18mm Wrench (T-C) and extend the hex
shaft.
Insert the hex shaft into Leg (A), making sure the metal retaining ring makes
contact with the leg. While holding the hex shaft with one hand, extend Sync
Rod (G) onto the spline shaft of Motorized Leg (B). Retighten the knob using
18mm Wrench (T-C).
STEP 8
Secure the frame assembly to the desktop using ST4.2x15mm Screws (S-A) and a
Phillips screwdriver.
STEP 9
Assemble Control Panel (K) to Front Desktop (C) using ST4.2x15mm Screws (S-A)
and a Phillips screwdriver.
STEP 10
Plug the cable from Motorized Leg (B) into Control Panel (K). Connect Control
Panel (K) and Power Cable (L) to AC Adapter (J).
STEP 11
Insert AC Adapter (J) into Tray (I).
STEP 12
Remove adhesive backing from Cable Clips (Q). Stick them to the underside of
the desktop assembly, and manage cables.
STEP 13
Insert Cable Management Cover (P) into Back Desktop (D).
STEP 14
Assemble Shelf Braces (X) to Back Desktop (D) using Wooden Dowels (O) and
ST4.2x40mm Screws (S-E).
STEP 15
Insert Cam Lock Screws (S-F) into Lower Shelf Panel (T).
STEP 16
Assemble Lower Shelf Panel (T) to Shelf Braces (X) using Wooden Dowels (O) and
Cam Lock Screws (S-F).
STEP 17
Insert Cam Locks (S-G) into the center hole in Shelf Braces (X).
STEP 18
Assemble Right Shelf Panel (V) and Left Shelf Panel (W) to Lower Shelf Panel
(T) using Wooden Dowels (O).
STEP 19
Secure the shelf assembly to Back Desktop (D) using ST4.2x40mm Screws (S-E).
STEP 20
Insert Cam Lock Screws (S-F) into Back Shelf Panel (U).
STEP 21
Assemble Back Shelf Panel (U) to the shelf assembly using Wooden Dowels (O).
STEP 22
Insert Cam Locks (S-G) into the rear holes of Right Shelf Panel (V), Left
Shelf Panel (W), and Shelf Braces (X).
STEP 23
Secure Back Shelf Panel (U) to Back Desktop (D) using ST4.2x40mm Screws (S-E).
STEP 24
Unfold Drawers (R) and place the drawer insert inside.
STEP 25
Insert Drawers (R) into the drawer assembly.
STEP 26
Plug Power Cable (L) into an AC power outlet. The desk is now ready for use.
Please refer to the Control Panel User Guide for operational instructions.
CAUTION!
Failure to follow these instructions may result in property damage and/or personal injury.
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
LAST UPDATED: 07/27/2022
REV2.1
Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
309-278-5303| AVG. RESOLUTION TIME
(within office hrs): 5M 4S
---|---
www.vivo-us.com
Chat live with an agent!| AVG. RESOLUTION TIME (within office hrs): < 15 M
****help@vivo-us.com| AVG. RESPONSE TIME (within
office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- Two Tier 48" x 24" Mobile Electric Storage Desk – VIVO - desk solutions, screen mounting, and more