vivo V2247 Smartphone User Guide
- June 15, 2024
- Vivo
Table of Contents
V2247 Smartphone
Quick Start Guide
V2247 Smartphone
Tips:
Insertremove your SIM card using the provided eject tool. To avoid damaging
the device, do NOT remove the back cover. This phone supports standard nano
SIM cards. If necessary, please go to your local operator shop for a standard
nano SIM card.
Welcome to vivo
Please read this Quick Start Guide before using your phone, and Keep it for
future reference.
“This Quick Start Guide tells you how to set up your phone and use s key
features. For more detailed instructions, turm on your phone, then go to
Setings > About phone > Cusiomer service > Manual. You can also lear more
useful information on vivo’s offcal website.
Forlegal information, go to Settings > About phone > Legal information.
For the FCC ID of this phon phone > Status.
“The features and images shown inthis guide are for reference only. They may
difr from the actual product.
Itis recommended to charge the device for a least 30 minutes.
before turning it on for the first tme.
Optimum operating temperature is 0ºC 1o 35ºC and optimum storage temperature
is -20ºC 1o 45ºC – Extrome hea or cold may damage your device or accessories
please go o Sattings > About
FCC statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must acoept any interference received, including interference that may cause undesited operaion.
Caution: Changes or modifcations not exprossly approved by vivo Mobile
Communication Co, Ltd. could void the user’s authorty to operate the device,
Note: This equipment has been tested and found to comply with the limits for &
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful nterference in a
residentil nstalation.
This equipment generates, uses, and can radiate radio frequency energy and,
not installed and used in accordance. wih the instructions, may cause harmiul
nterference to radio communications. Howaver, there so no guarantee that
interference will not occur i particular instalation.
If this equipment does cause harmful nterference to radio or television
reception, which can be determined by turning the equipment off and on, the
user s encouraged to try to correc the interference by one of more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and recaiver.
- Connect the equipment to an outlet on a circuit diferent from, thatto which the receiver is connected.
Consutthe dealer or an experienced radioTV technician for help.
SAR statement
This device meels the governments requirements for exposure to radio waves.
“This device s designed and manufactured not to exceed the emission fimits for
exposure to radio frequency (RF) energy et by the Federal Communications
Commission of the U.S. Government.
The SAR limit set by the FCC is 1.6 Wikg. For body-worn operation, this device
has been tested and meets the FCC RF exposure guidelines for use vith
accessories that contain no metal, with the device posiioned at least 15 mm
away from the body. RF exposure compliance with any body-worn accessories that
contain metal has not been tested and certified, and use of Such body-worn
accessories should be avoided. Accessories available commercially must be used
with a distance of atleast 15 mm betwoen the device and the user’s body for
body-worn operation.
FCC SAR
Head: XXX Wikg
Body-worn:
XXX Wikg(15mm distance)
Holspot: X XX Wikg (10mm distance)
Product Standard Accessories
Cellphione x 1
Charger x 1
USB cable x 1
Phone case x 1
Ejectiool x 1
Warranty card x 1
Quick start guide x 1
Version: V1.0 5130564 FXXX