INKBIRDPLUS HT2004 Space Heater User Manual

INKBIRDPLUS HT2004 Space Heater

Specifications

• Model No: HT2004-15D-W
• Item No: IHT-01W
• Heat Settings: 1000W (low) / 1500W (high)
• Rating: US 120V, 60Hz (EU 220-240V, 50/60Hz)
• Timer Setting Range: 0~24 Hours
• Wi-Fi: IEEE802.11/b/g/n 2.4GHz
• Product Warranty: 1 Year

Operation Instructions

Positioning of the Heater
The heater should only be operated at a minimum distance of 1 metre from any wall or other object. Position the air ow in order to optimize the heating of the room.

Turn ON/OFF the Heater

1. Place the heater on a level surface in a stable upright position.
2. Connect the heater to the power source, then pressthe the button to turn on the heater. The indicator light will automatically light up.
   Note: Ensure the voltage on the speci cation plate is the same as in your home and the power cord is lying safely on the ground.

ECO Mode

1. After activating the appliance, it enters ECO mode by default.
2. In the working state, press the ECO button to enter the setting of ECO mode, then press the “-” or “+” button to set a target temperature within the range of 41°F to 97°F (5°C to 36°C). After that, press the ECO button again to save and quit the setting.
3. ECO mode will automatically control the heating on or off according to the set temperature.

Manual Mode

During operation, press the button to enter manual mode and simultaneously activate the associated low/high heat power to blow.  = Low Heat (1000W); = High Heat (1500W)

Timer Function

1. The timer function can be set at any time and can work in both ECO mode and manual mode.
2. In the working state, press the   button to enter the timer setting, and then press the “ + ” or “ – ” button to set the timer within the range from 0 to 24 hours.

Oscillation Function

In the working state, press the   button to let the heater start/stop oscillating.

Wi-Fi Function

1. When you turn on the heater, the Wi-Fi button will automatically light up and ash, which means it is ready to pair with the network.
2. If you fail to connect the heater with your smartphone, press the Wi-Fi button and hold it until it ashes to reset the connection.

Over-Heat Protection

1. This heater has over-heat protection that switches it off automatically if it overheats.
2. Overheating can be caused by obstruction to the air intake on the back of the heater or the grill on the front.
3. If overheating occurs, please disconnect the heater from the power socket and allow it to cool for 30 minutes. Remove any obstruction before turning the heater back on.

Safety Cut-Out Switch
The heater features a safety cut-out switch that will switch off the heater if it is knocked over.

Notes:

1. If the heater is knocked over and the cut-out switch is activated, cut off the power and take extra care when you stand the heater upright as it will still be hot.
2. Inspect the heater for damage, especially to the heating elements and supply cord.
3. If any damage is visible do not operate the heater.

APP Connection

Search the keyword “INKBIRD” in App store or Google Play, or scan the following QR code to download and install the APP. (If you have previously installed the app, please update it to the latest version.)

1. Open the app and enter the login interface. You can log in by your Apple ID or Google ID. You can also click Register and use your email address as prompted to register.

2. Click the “+” in the upper right corner to add the device. Then, click the device icon on the app to start connecting.

3. Turn on the device, then click “Next” to continue.

4. Choose a Wi-Fi network and enter the password. Then, click “Next” to the next step.
   Note: The device only supports 2.4GHz Wi-Fi networks.

5. Press the   button and hold until it ashes, then click “Con rm” to continue.

6. Connection Succeeded.

Notes:

1. During the connection process, it is necessary to ensure that the distance between the device and the mobile phone is within 30 meters, as Wi-Fi is a short -distance connection.
2. During the connection process, please ensure that the device and the mobile phone are in the same Wi-Fi environment and only support the 2.4GHz Wi-Fi signal mode.
3. Please make sure the Bluetooth of your phone is turned on before connecting.

Precautions For Use

• Use only the voltage speci ed on the rating label of the appliance.
• Do not cover or restrict air ow to the inlet or outlet grilles in any manner as the appliance may overheat and become a re risk.
• Do not cover grilles, block entry, or exits of air ow by placing the appliance against any surface. Keep all objects at least 1 meter from the front, side, and rear of the appliance.
• Do not operate in areas where gasoline, paint, or other ammable liquids are used or stored.
• This appliance heats up when in use. To avoid burns, do not touch the front of the appliance or any of the grilles or vents.
• Before moving the appliance, switch off the appliance by unplugging it from the wall and allowing it to cool.
• Do not use the appliance to dry clothes.
• Do not immerse in liquid or use the appliance near water as this could create an electrical shock hazard.
• Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been dropped or damaged in any manner. Return to a quali ed electrical person for service or repair.
• Do not connect the appliance to the mains voltage until completely assembled and adjusted.
• This appliance is not intended for outdoor use.
• Unroll the cord before operating. Operating with a coiled cord may cause overheating and re risk.
• The use of an extension cord with this appliance is not recommended.
• Do not remove the plug from the power socket until the appliance has been switched off.
• Always hold the plug when removing it from the wall, do not pull the cord.
• Always unplug the appliance when it is not in use.
• Do not allow the cord to come into contact with the appliance surface during operation.
• Do not run the cord under carpeting, mats or rugs, etc. Arrange the cord away from traf c areas so that it will not be tripped over.
• Do not twist, kink, or wrap the cord around the appliance as this may cause the insulation to weaken and split.
• This appliance is not intended for use by young children or in rm persons without supervision.
• This appliance is intended for light domestic use and not for heavy-duty commercial or industrial use.
• The appliance must not be located immediately below or in front of a socket- outlet.
• Do not use this appliance with any type of external timer.

Cleaning And Care

IMPORTANT: Turn off the heater. Switch off the power switch and disconnect the heater from the power socket. Wait for the heater to be completely cool before cleaning.

1. Vacuum clean air vents and grilles to remove dust from these areas.
2. To remove dust on external surfaces, wipe the heater with a damp (not wet) lint-free cloth rinsed in hot soapy water only.
3. Do not use any harsh detergent or abrasive cleaners.
4. Do not spray with liquids or submerge the heater in water or other liquids.
5. Do not attempt to clean the interior of the heater.
6. Do not attempt to open the heater casing at any time.
7. Store the heater carefully in a dust-free area during the off-season. It is best to store the heater in the included carton. Neatly wind the cord of the heater to prevent damage.

Product Warranty

This item carries a 1-year warranty against defects in either components or workmanship. During this period, products that prove to be defective will, at the discretion of INKBIRD, be either repaired or replaced without charge.

INKBIRD TECH.C.L.
support@inkbird.com

Factory address: Building 713, Pengi Liantang Industrial Area, N0.2 Pengxing Road, Lunhu Disctrict, Shenzhen, China
Office address: Room 1803, Guowei Building, NO.68 Guowei Road, Xianhu Community, Liantang, Luohu District, Shenzhen, China

TANMET INT’L BUSINESS LTD 9 Pantygraigwen Road, Pontypridd, Mid Glamorgan,CF37 2RR, UK E-mail: tanmetbiz@outlook.com

Like Sun GmbH
Planckstr. 59, 45147 Essen, Nordrhein-Westfalen, Germany Email: ec- connection@web.de

MADE IN CHINA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>