INKBIRDPLUS 1500W Portable WiFi Space Heater User Manual
- June 15, 2024
- INKBIRDPLUS
Table of Contents
INKBIRDPLUS 1500W Portable WiFi Space Heater
Product Information
Specifications
- Product Name: Space Heater
- Model: Basic
- Power Output: Low Heat (1000W), High Heat (1500W)
- Manufacturer: TANMET INT’L BUSINESS LTD
- Address: 9 Pantygraigwen Road, Pontypridd, Mid Glamorgan, CF37 2RR, UK
- Email: [email protected].
Product Usage Instructions
Power ON/OFF
To turn on the space heater, locate the power button and press it. The heater
will start operating at the default settings. To turn off the heater, press
the power button again.
Heat Settings
The space heater offers two heat settings:
- Low Heat (1000W): Press the Low Heat button to activate the low heat setting.
- High Heat (1500W): Press the High Heat button to activate the high heat setting.
Oscillation Mode
The space heater features an oscillation mode that allows the heat to be
distributed in a wider area. To activate the oscillation mode, locate the
Oscillation Mode button and press it. The heater will start oscillating,
spreading the warmth throughout the room.
ECO Mode
The space heater includes an ECO mode that helps conserve energy. When
activated, the heater will adjust its heat output based on the current room
temperature. To activate ECO mode, locate the ECO Mode button and press it.
Natural Wind
The space heater can also provide a natural wind mode, simulating a gentle
breeze without producing heat. To activate the natural wind mode, locate the
Natural Wind button and press it.
Timer Setting
The space heater allows you to set a timer for automatic shut-off. To set the
timer, follow these steps:
- Press the Timer Setting button.
- Use the designated controls to adjust the desired time duration.
- Confirm the timer setting by pressing the Timer Setting button again.
Note:
The timer setting will automatically turn off the space heater after the
specified duration.
Frequently Asked Questions (FAQ)
-
Q: How do I clean the space heater?
A: Before cleaning the space heater, ensure it is turned off and unplugged from the power socket. Use a soft cloth to wipe the exterior surface of the heater. Do not use water or any cleaning agents on the heater. -
Q: Why does the space heater shut off suddenly?
A: The space heater has built-in safety features to prevent overheating. If the heater detects an unsafe temperature, it will automatically shut off. Ensure no obstructions are blocking the heater’s vents and that it is placed on a stable surface. Allow the heater to cool down for 30 minutes before turning it back on. -
Q: Can I use the space heater in a bathroom?
A: No, it is not recommended to use the space heater in a bathroom or any other areas where water is present. This can be dangerous and may cause electrical hazards.
Specifications
- Model No: HT2004-15D
- Item No: IHT-01
- Heat Settings: 1000W (low) / 1500W (high)
- Rating: US 120V, 60Hz (EU 220-240V, 50/60Hz)
- Timer Setting Range: 0~24 Hours
- Product Warranty: 1 Year
Operation Instructions
- : Timer Setting
- : Oscillation Mode
- : Low Heat
- : ECO Mode
- : Natural Wind
- : Power ON/OFF
- : High Heat
Turn ON/OFF the Heater
- Place the heater on a level surface in a stable upright position.
- Connect the heater to the power source, then press the button to turn on the heater. The indicator light will automatically light up.
Note: Ensure the voltage on the specification plate is the same as in your home and the power cord is lying safely on the ground.
ECO Mode
- After activating the appliance, it enters ECO mode by default.
- In the working state, press the ECO button to enter the setting of ECO mode, then press the “-” or “+” button to set a target temperature within the range of 41°F to 97°F (5°C to 36°C). After that, press the ECO button again to save and quit the setting.
- ECO mode will automatically control the heating on or off according to the set temperature.
Manual Mode
During operation, press the or button to enter manual mode and
simultaneously activate the associated low/high heat power to blow.
- = Low Heat (1000W);
- = High Heat (1500W)
Timer Function
- The timer function can be set at any time and can work in both ECO mode and manual mode.
- In the working state, press the button to enter the timer setting, and then press the “ + ” or “ – ” button to set the timer within the range from 0 to 24 hours.
Oscillation Function
In the working state, press the button to let the heater start/stop
oscillating.
Natural Wind Function
In the working state, press the button to stop heating and blow out the
natural wind.
Remote Control
The telecontroller duplicates all the controls on the heater. Please refer to
the above operation instructions. You can use the controller to control the
heater from a range of 3 to 6 meters.
Over-Heat Protection
- This heater has over-heat protection that switches it off automatically if it overheats.
- Overheating can be caused by obstruction to the air intake on the back of the heater or the grill on the front.
- If overheating occurs, please disconnect the heater from the power socket and allow it to cool for 30 minutes. Remove any obstruction before turning the heater back on.
Safety Cut-Out Switch
The heater features a safety cut-out switch that will switch off the heater if
it is knocked over.
Notes:
- If the heater is knocked over and the cut-out switch is activated, cut off the power and take extra care when you stand the heater upright as it will still be hot.
- Inspect the heater for damage, especially to the heating elements and supply cord.
- If any damage is visible do not operate the heater.
Precautions For Use
- Use only the voltage specified on the rating label of the appliance.
- Do not cover or restrict air ow to the inlet or outlet grilles in any manner as the appliance may overheat and become a re-risk.
- Do not cover grilles, block entry, or exits of air, or place the appliance against any surface. Keep all objects at least 1 meter from the front, side, and rear of the appliance.
- Do not operate in areas where gasoline, paint, or other flammable liquids are used or stored.
- This appliance heats up when in use. To avoid burns, do not touch the front of the appliance or any of the grilles or vents.
- Before moving the appliance, switch off the appliance by unplugging it from the wall and allowing it to cool.
- Do not use the appliance to dry clothes.
- Do not immerse in liquid or use the appliance near water as this could create an electrical shock hazard.
- Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been dropped or damaged in any manner. Return to a qualified electrical person for service or repair.
- Do not connect the appliance to the mains voltage until completely assembled and adjusted.
- This appliance is not intended for outdoor use.
- Unroll the cord before operating. Operating with a coiled cord may cause overheating and re-risk.
- The use of an extension cord with this appliance is not recommended.
- Do not remove the plug from the power socket until the appliance has been switched off.
- Always hold the plug when removing it from the wall, do not pull the cord.
- Always unplug the appliance when it is not in use.
- Do not allow the cord to come into contact with the appliance surface during operation.
- Do not run the cord under carpeting, mats rugs, etc. Arrange the cord away from the trafc areas so that it will not be tripped over.
- Do not twist, kink, or wrap the cord around the appliance as this may cause the insulation to weaken and split.
- This appliance is not intended for use by young children or in RM persons without supervision.
- This appliance is intended for light domestic use and not for heavy-duty commercial or industrial use.
- The appliance must not be located immediately below or in front of a socket- outlet.
- Do not use this appliance with any type of external timer.
Cleaning And Care
IMPORTANT:
Turn off the heater. Switch off the power switch and disconnect the heater
from the power socket. Wait for the heater to be completely cool before
cleaning.
- Vacuum clean air vents and grilles to remove dust from these areas.
- To remove dust on external surfaces, wipe the heater with a damp (not wet) lint-free cloth and rinse in hot soapy water only.
- Do not use any harsh detergent or abrasive cleaners.
- Do not spray with liquids or submerge the heater in water or other liquids.
- Do not attempt to clean the interior of the heater.
- Do not attempt to open the heater casing at any time.
- Store the heater carefully in a dust-free area during the off-season. It is best to store the heater in the included carton. Neatly wind the cord of the heater to prevent damage.
Product Warranty
This item carries a 1-year warranty against defects in either components or workmanship. During this period, products that prove to be defective will, at the discretion of INKBIRD, be either repaired or replaced without charge.
INKBIRD TECH.C.L.
[email protected]
- Factory address: Building 713, Pengji Liantang Industrial Area, NO.2 Pengxing Road, Luohu District, Shenzhen, China.
- Office address: Room 1803, Guowei Building, NO.68 Guowei Road, Xianhu Community, Liantang, Luohu District, Shenzhen, China.
- TANMET INT’L BUSINESS LTD 9 Pantygraigwen Road, Pontypridd, Mid Glamorgan, CF37 2RR, UK E-mail: [email protected].
- Like Sun GmbH
Planckstr. 59, 45147 Essen, Nordrhein-Westfalen, Germany Email: ec- [email protected].
MADE IN CHINA.