Delmhorst Navigator Series BDX Moisture Meter User Guide
- June 13, 2024
- Delmhorst
Table of Contents
Navigator Series BDX Moisture Meter
User Guide
Quick Start Guide
75 YEARS
1946 – 2021
Navigator™ Series
Components
-
Display
Large, easy to read under all conditions -
Read Button
Press from any screen to enter live reading mode Press again to toggle between live and held reading -
Navigation Buttons
Move between and down into the READ, SET and STATS menus Center button to save readings or changes to settings -
Easy-grip Handle
Easily push pins into material -
Colored LEDs
Red, yellow, and green LEDs show the relative moisture status
Adjustable within the Delmhorst EDGE TM App -
Ambient Light Sensor
Turns backlight on and off in Auto Backlight mode -
Pins (applicable meters only)
Insert integral pins up to 5/16” into material to take reading -
Electrode Connec tor
Connect with any Delmhorst electrode to extend functionality
Your Meter
READ
View, hold and save readings
Change material/species
Adjust alarm set point
Set material temperature (applicable meters only)
Set insulated vs. non-insulated pins (applicable meters only)
Read Adjustments
- Up/down to move between Read screen settings
- Left/right buttons to adjust value
SET
Calibration Check: 12.0 +/- 0.2
Temperature Units: °F/°C
Meter Timeout: 1/4/10 minutes
Bluetooth® : ON/OFF
Display Brightness: 1-10
Backlight: ON/OFF/AUTO
Display Contrast: 1-10
**Bluetooth® Indicator *
STATS
Save up to 100 readings
Saved readings contain material type, reading value, material temp, and pin
type
View average, high and low values
View last 10 readings
Selection Arrows**
- Left/right to adjust when blinking
- Center/down to enter current selection
Meter Features
- Bluetooth ®app for customizing device and exporting data*
- English, Spanish, French, German, Italian and Russian*
- Customizable*, color-coded LED’s Built in material, temperature and pin-type correction
- Adjustable alarm
- Built in calibration check
- Compatible with all Delmhorst electrodes
- Powered by 2 x AA batteries 2 year warranty
Quick Start
Turn Meter On and Off
- Remove tab from inside battery compartment
- Press any key to wake meter
- Long press center button to initiate timeout
Take a Reading
- Press Read button from any screen to enter live reading mode
Hold a Reading
- Read button toggles between held and live reading
- Held readings will blink
Save and Export a Reading
- Press center button to save reading from live or held reading
- Saved readings will export to EDGETM app when app and meter are connected*
Delmhorst EDGETM App*
- Upload readings from meter to app Access to expanded material/species selections, including foreign species sets (applicable meters only)
- View all readings on a single screen
- Add timestamp and geotags to readings
- Exclude outlier readings from statistics
- Generates plot of all readings
- Customize LED range
- Multi-language support for app and meter
- Export readings to Excel® for additional analysis and report generation
Download the App
|
---|---
https://apps.apple.com/us/app/delmhorst-edge/id1521544764|
https://play.google.com/store/apps/details?id=com.Delmhorst.CompanionApp
Support and FAQ
https://me-qr.com/10906006
*Navig ator Series –
“30” models only
510QSG-0002, Rev 04/2022
Distributed by: ABQ Industrial LP USA
Tel: +1 281-516-9292 /
888-275-5772 eFax: +1
866-234-0451
Web: https://www.abqindustrial.net
E-mail: [email protected]