Shen Zhen Xin Hua Tian Technology BT-801 Bluetooth USB Adapter Installation Guide
- June 6, 2024
- Shen Zhen Xin Hua Tian Technology
Table of Contents
Bluetooth USB Adapter
Model: BT-801
Shenzhen Shi Xin Hua Tian Technology Co., LTD
Installation Guide
Part 1, Take Windows 10 as an Example
- Connect Bluetooth adapter to the computer, insert our disk which contains a driver file, and double click “ Setup.exe ” to start
- Select”Agree and Install the Bluetooth Driver” to start installation After the progress bar indicates it is done, It is done, please restart the computer.
| |
---|---|---
Part 2, Pair with Your Device via Bluetooth
- Select the Bluetooth icon on the bottom right of our system’s toolbar, then right-click to pull out a man bar. Click”Add a Bluetooth Device”
- Look through and select the Bluetooth device you want to pair with, Dual click the “Device”, the system will automatically start pairing, which means the pairing process is done, Fell free to personalize settings at Control Interface.
- |
---|---
Part 3, Pair with a Cell Phone
- Click”Add a Bluetooth Device”
- Look through and select the cell phone you want to pair with, the system will start to pair by clicking”Next”.At the same time, a code will pump up on both the system and cell phone, this is a certificate whether they are the right pairs or not. Click”Start to Pair” on your phone and “Next” on the computer to activate the pairing process.
- |
---|---
When it pumps out a dialogue that says”Your device is ready to go”,that means the pairing process is done, Click”Done”, Fell free to personalize the setting at Control Interface.
- Right-click the file which you want to transfer and select “Send to Bluetooth Device”.
- Select a receiving device, support selecting multi-files simultaneously, here we take”Vivo X9s Plus” as an example, click”Next”.
- On your phone end, click”Accept” to start data transfer.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>