YITAHOME SHMYD-V1 Portable Ev Charger Instruction Manual
- June 14, 2024
- YITAHOME
Table of Contents
YITAHOME SHMYD-V1 Portable Ev Charger
ASSEMBLY INSTRUCTIONS
Specifications
| Item | Level 2 Portable EV Charger |
|---|---|
| Rate Current | A.6A/8A/10A/13A/16A |
B.10A/16A/20A/24A/32A
C.16A/20A/24A/32A/40A
Input Voltage AC| 110V~240V
Rate Frequency Waterproof Degree| 50Hz/60Hz
| IP67
Working Temperature| -25℃~+55℃
Withstand Voltage| 2000V
Shell Material| PC
Terminal Material| Copper Alloy Silver Plating
Flame Retardant Grade| UL94 V-0
Operating Humidity| 20%-85%
Mechanical Life| No-Load Plug In / Pull Out ＞10000 Times
Pressure Impact Force| Can afford 1m drop and 2t vehicle run over
pressure Impact Force
25FT
Cable Length|
Standard| IEC 62752 , IEC 61851
Certificatevv| TUV,CE,UKCA,FCC
Operating Instruction
How to start charging
- Step 1. Take out the charger and firmly insert the power plug into the walled outlet socket.
- Step 2. Please press the button of “CURRENT ” to adjust your required current. Or please press the button of ” DELAY ” to adjust your charging time. The device will default to the last current setting when we charge next time.
- Step 3. Insert the charging plug (Car End) into the car side charging inlet, the device start charging automatically while the READY/CHARGE、POWER indicators are all green.
How to stop charging
- Step 1. Please take out the EV charging gun from car side after the car charging is complete.
- Step 2. Disconnect the power plug from the wall socket outlet.
- Step 3. Pack up the EV charger cable and put into the bag.
Security Protection
- Short Circuit Protection
- Over and Under Frequency Protection
- Over Current Protection
- Leakage Current Protection (restart recover）
- Over Temperature Protection
- Overload Protection (self-checking recovery)
- Ground Protection
- Surge Protection
- Over Voltage and Under-voltage Protection
GOOD TO KNOW
- This is a Level 2 EV charging cable don’t use it for EV’s other different inle types.
- Please check if the device is intact and items are accordance with the packing list when you receive the package.
- Do not submerge the EV control box or EV charging connector in water.
- Do not use the charger if the EV controller box is damaged.
- Don’t charge if the wall socket is damaged, rusted, cracked or loosely connected.
- Wipe with a clean and dry cloth if the plug gets dirty or wet.
- The device must be grounded.
- Do not use this device with an extension cord or an adapter.
- Do not place the charging cable near high high-temperature object when it is working.
- Do not use this device with an extension cord or an adapter, Please do not disconnect the plugs while the EV charger is charging the vehicle.
CONTACT US:
If you have any questions about the installation of YITAHOME products, just
contact us at
+1 888-717-8084 from Mon-Fri 8:00
AM-4:30 PM PST / Sat. 8:00 AM-12:00 PM PST or e-mail
us at after-sale.cs@hotmail.com
Alternative method to contact us (amazon.com orders only)
- Log into your Amazon account
- Go to “Your Orders” and find the purchase
- Click on “Contact Seller”
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>