VIVO DESK-SKIRT-30P Black Clamp On 30 Cable Management Desk Organizer Instruction Manual

June 14, 2024
Vivo

VIVO DESK-SKIRT-30P Black Clamp On 30 Cable Management Desk Organizer

VIVO DESK-SKIRT-30P Black Clamp On 30 Cable Management Desk Organizer

WARNING!

If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or inappropriate use.

WARNING: CHOKING HAZARD

SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

PACKAGE CONTENTS

  • A (x1) Panel

  • B (x2) Side Ba

  • C (x2) T Joiner

  • D (x2) Clamp

  • E (x2) Mounting Clip

  • F (x4) Upper/Lower Bar

  • G (x1) Middle Bar

  • H (x4) Joiner

  • S-A (x2) M4x6mm Screw

  • M-A (x2) ST4.8x19mm Screw

TOOLS NEEDED
  • Phillips Screwdriver

  • Drill

  • Pencil

DO NOT EXCEED WEIGHT CAPACITY.

Failure to do so may result in serious injury

ASSEMBLY STEPS

STEP 1

Connect the centers of the T Joiners (C) to the ends of the Middle Bar (G). Connect the Upper/Lower Bars (F) to the sides of the T Joiners (C), then connect the Joiners (H) and Side Bars (B) to the sides to complete the frame assembly.
Assembly Steps

STEP 2

Open the flap and straps of Panel (A) and insert the frame assembly, making sure it is fully inserted and the material is tightly stretched around it.
Assembly Steps

STEP 3

Fasten the straps on Panel (A) to secure the frame.
Assembly Steps

STEP 4

Place Mounting Clips (E) in the center of each exposed portion of Upper/Lower Bars (F). Make sure the wire management flap on Panel (A) is facing upward.
NOTE: To screw mount under your desktop instead of clamping, please skip to Step 4-Option 2 on page 6.

STEP 5

For thinner desktops ( <1.5”/40mm), adjust Clamp (D) by disassembling and separating Upper Clamp (D1) from Lower Clamp (D2). Flip Lower Clamp (D2) and reassemble using a Phillips screwdriver.
Assembly Steps

STEP 6

Secure Mounting Clips (E) to Clamps (D) in one of two mounting locations using M4x6mm Screws (S-A)
Assembly Steps

STEP 7

Mount the assembled panel to the desktop and tighten Clamps (D) to secure the assembly in place.
Assembly Steps

STEP 8

Route and organize the cables and secure them using the flap on the panel (A).
Assembly Steps

Step 4 – Option 2

Screw Mounting:
Place Mounting Clips (E) in the center of each exposed portion of Upper/Lower Bars (F).
NOTE: Make sure the wire management flap on Panel (A) is facing the inside of the desktop.
Assembly Steps

STEP 5 – Option 2

Screw Mounting
Center the assembled panel under the desktop.
Assembly Steps

STEP 6 – Option 2

Screw Mounting
Mark the locations of Mounting Clips (E) using a pencil. Drill pilot holes using a 1/8” (3mm) bit and
mount the assembled panel to the underside of the desk using ST4.8x21mm Screws (M-A) as shown.
NOTE: Desktop must be at least 1” thick to prevent screws from poking out through the top and damaging the surface.
Assembly Steps

STEP 7 – Option 2

Screw Mounting
Route and organize the cables and secure them using the flap on Panel (A).
Assembly Steps

 Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us

SKU: DESK-SKIRT-30P


Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-skirt-60p

Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.

 309-278-5303

| AVG. RESOLUTION TIME (within office hrs): 5M 4S
---|---

 www.vivo-us.com Chat live with an agent!

| AVG. RESOLUTION TIME (within office hrs): < 15 M

 help@vivo-us.com

| AVG. RESPONSE TIME (within office hrs): 1HR 8M

  • 23% within < 15m
  • 38% within < 30m
  • 61% within < 1hr
  • 83% within < 2hr
  • 92% within < 3hr

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Vivo User Manuals

Related Manuals