AUKEY HD-MC13 Wireless Charging User Manual
- June 14, 2024
- Aukey
Table of Contents
USER MANUAL
Wireless charging
Installing the phone mount
-
Snap the joint ball along with the nut into the slot.
-
Screw the nut and select a suitable position.
-
Rotate the locking knob and fix the mount to the air vent.
Charging Your USB Devices
Note
- This wireless charger can provide magnetic alignment for iPhone 12/13/14/15 series.
- This wireless charger is able to provide fast charging up to 15W for iPhone 15 and later models, as well as select Android smartphones.
Product Care and Precautions
- Keep away from liquids and extreme heat.
- Do not leave it in humid, extremely hot or cold place for a long time.
- It is normal for the device to heat up slightly when charging. If it gets too hot to operate, stop charging immediately.
- The body and internal electronic components may break down, leading to an accident such as fire or electric shock. Do not disassemble or modify.
Warning
- Do not place anything other than compatible devices on top of this product.
- Charging while there is an object (especially metal) between the product and a device may cause heat or fire. Remove the case or smartphone ring that contains metal before charging.
- If you use a cardiac pacemaker, consult your doctor before using this product.
- Do not bring magnetic cards (credit cards, cash cards, etc.) close to the product.
Please note that we are not responsible for any damage to card data due to the influence of magnets.
This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
Warranty & Customer Support
For questions, support, or warranty claims, please contact your seller directly.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
Specifications
Model | HD-MC13 |
---|---|
Input | USB-C In: 5V 3A / 9V 2.22A |
Output | Wireless: 5W, 7.5W, 10W, 15W (Max) |
Operating temperature | 0~25 ℃ |
Storage temperature | -20~60 ℃ |
Dimensions | 111.5 x 61 x 61mm / 4.39” x 2.40” x 2.40” |
Weight | 77g / 2.72oz |
Follow Us to Unlock More about AUKEY:
| @AUKEYofficial
---|---
| @aukeyofficial
| @AUKEYofficial
| AUKEYofficial
Model: HD-MC13
Aukey Technology Co., Ltd.
www.aukey.com
support@aukey.com
Room 102, Building P09, South China City,
Electronic trading center, Longgang District,
Shenzhen, China
FCC ID :2ATIH-HD-MC13