anybus A081C Wireless Earbuds User Manual
- June 14, 2024
- Anybus
Table of Contents
anybuds Clip
User Manual
Product diagrammatic sketch
Packing list
Wearing steps
Ensure the speaker hole is facing into the ear.
Speaker hole facing outward is not the correct way to wear the earbuds.
Operation of earbuds
4.1 Howto pair
- Take out the two earbuds from charging case, they will turn on automatically and will connect each other within 10 seconds.
- The main earbud flashes red and blue alternately, and the secondary earbud light turn off (pairing mode).
- Search for pairing name [anybuds Clip] and select it in your mobile.
4.2 Another method of turning on & Turing off
Turn on:
Tap and hold the Touch Control on both earbuds for over 3 seconds.
Turn off:
- Touch the Control button 5 seconds will turn off when earbuds in playless status.
- The earbuds will turn off automatically after it is disconnected for more than 5 minutes.
4.3 Reset
If you accidentally get only one earbud work, or fail to pair each other,
please reset it:
- Delete all [anybuds Clip] Bluetooth records on the phone, then turn off the Bluetooth.
- Pick up two earbuds from charging case, then clicking the both earbuds twice quickly.
- The reset will be done when the blue light flashes rapidly, and then one of the earbuds red and blue light blinking alternately.
NOTE: In case there is connection unsuccessful in your devices, please delete all historical records of (anybuds Clip] and try the paring process again.
Charging
5.1 Charging the earbuds
- Put the earbuds into the charging case, they will power off & be charged automatically. When the red LED lights up, it means that the earbuds are being charged from charging case.
- The red light will turn off when the earbuds are fully charged.
5.2 Charging the charging case
Please use the 5V/1A adapter to charge the charging case, which can be charged
with a computer USB or other USB interface charger.
Button operation
6.1 Earbuds LED indicator
Turn on | Blue light flash for one second |
---|---|
Turn off | Red light flash for one second |
Pairing status | The main earbud flashes red and blue alternately, and the |
secondary earbud light turns off
Paired with the phone| Non-flashing light
Charging process| Red lights on
Fully charged| Red light goes out
6.2 Music operation
(Operation in wearing of double earbuds)
6.3 Calling control
Tap the “L/R” touch area to answer the call or operate on the mobile phone to
answer the call
Hold “L/R 2 seconds the sensing area to hang up the call
Hold “L/R 2 seconds the sensing area to reject the call
6.4 Voice assistant
NOTE: If you accidentally get only one earbud paired with phone, please make sure both earbuds have been turned on. (Tap and hold the unpaired earbud for 3 seconds to turn on). If necessary, please try “Reset” options to restore to factory settings.
Specification
Support Bluetooth profile | A2DP, AVRCP, HFP |
---|---|
Transmission Distance | 210m |
Speaker type | Ø13mm*2 |
Impedance | 32Ω |
Earbuds battery capacity | 35mAh |
Charging time of earbuds | ≤1.5 hours |
The battery capacity of charging case | 300mAh |
Charging time of the charging case | ≤ 2 hours |
Waterproof
Waterproof for daily use, but not for swimming under water.
- Please note that the phone’s Bluetooth signal can not be transmitted underwater.
Warning!
- Do not dismantle or refit the product to avoid malfunction or fire hazards.
- Keep away from corrosive liquids.
- Keep away from extreme ambient temperatures below-10°C or above 50°C.
- Keep away from children and pets.
- Do not touch the earbuds with sharp objects.
- Do not use the product in thunderstorm weather.
- If it has not been used for more than a month, please charge and maintain it in time to ensure that it is safe.
SPECIAL REMINDER:
Wipe the hardware contacts of the headset and charging box when the headset is
not charging.
Thank you for purchasing the anybuds authentic product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>