XTOOL D1 Pro Laser Engraver User Guide

XTOOL D1 Pro Laser Engraver

Product Information

Specifications

• Product Name: xTool D1 Pro
• Type: Laser Engraver and Laser Cutter
• Accuracy: High
• Power: High
• Color Options: Golden Red

Description

tool D1 Pro is a high-accuracy and high-power laser engraver and laser cutter. It is designed to provide the best laser engraving and cutting experience for users, whether they are beginners or experts, and whether they use it at home or for business purposes. The product aims to make it easier for everyone to create with its machine. It values product experience and user suggestions and provides support through its Facebook group, online store, and support center.

Unboxing and Checking
Before starting with the assembly and setup process, please ensure that you have received all the necessary components listed below:

1. Plate components
2. Power adapter & cable
3. USB cable
4. Motor cable
5. Cable tie pack
6. Limit switch connection cable
7. Shaft
8. TF card
9. Coupling
10. Screwdriver
11. Hex key
12. Parts storage box
13. Screw M4*8
14. Screw M4*16
15. Screw M4*25
16. Nozzle connector components
17. Laser module
18. Safety goggles
19. Material pack
20. Quick Start Guide/Instructions/Brochure
21. Aluminum sheet A4
22. Riser (included only in some packs)
23. Rotary Attachment 2 components (included only in some packs)

Product Usage Instructions

Assemble xTool D1 Pro

1. Follow the provided diagram to assemble the components in the correct order.
2. Refer to the tutorial video on support.xtool.com or scan the QR code for additional assistance.
3. Ensure that the timing belts are not fully tightened to avoid damage.
4. If the timing belt is too tight to pass the shaft through, adjust its tension using the screw.
5. Keep a small distance between the coupling and the motor to allow proper rotation and avoid noise.
6. Slide the two sliders down against the front plate. Tighten the two screws securely.
7. Pay attention to the front and back sides of the connector and insert it properly.
8. Remove any cable ties that are not necessary and keep the black ones.

Set up xTool D1 Pro

• Follow the instructions provided in the Quick Start Guide to set up your xTool D1 Pro.

Download and Install Software

• Visit the official website at www.xtool.com to download the required software for your xTool D1 Pro.
• Follow the installation instructions provided with the software to complete the installation process.

Create with Example Projects

• Explore the example projects provided in the software to get started with creating your own designs.
• Follow the instructions and tutorials within the software to learn how to use the different features and functions of xTool D1 Pro.

Use Rotary Attachment 2

• If you have the Rotary Attachment 2 components, follow the provided instructions to attach and use it with your xTool D1 Pro.

Clean the Laser Module

• Refer to the cleaning instructions provided in the user manual to properly clean the laser module of your xTool D1 Pro.

FAQ

1. Q: Are scissors included in the pack?
   A: No, scissors are not included in the pack.

2. Q: Where can I find tutorial videos for assembly and setup?
   A: You can visit support.xtool.com or scan the QR code provided in the user manual to find tutorial videos.

3. Q: What should I do if I can’t put the shaft through the timing belt?
   A: If you are unable to put the shaft through the timing belt, it may be too tight. Adjust its tension by turning the screw.

4. Q: How should I set the tension of the timing belt screws?
   A: Do not fully tighten the timing belt screws as it may damage the timing belt. Keep a small distance between the coupling and the motor to avoid any issues.

THANK YOU

Dear xTooler:

• Thank you for purchasing xTool D1 Pro. We are so grateful for your recognition, and sincerely hope you will enjoy this product!
• xTool D1 Pro is a high-accuracy and high-power laser engraver and laser cutter. From novice to expert, from home use to business, xTool D1 Pro is ready to give you the best laser engraving & cutting experience.
• Our mission is to make it easier for everyone to create with our machine. We attach great importance to product experience and user suggestions. Please let us know if you have any questions anytime. We are always here to help. You can join our Facebook group which gathers 25000+ innovators like you, to share creative ideas and get inspired by others.
• By visiting our online store, you can also find our latest accessories and various materials to maximize the magic of xTool D1 Pro.
• Thanks again for your support, and we will consistently provide quality products and services in the future.
  Sincerely,

CEO

• Official Website : www.xtool.com

• Facebook Group : xTool D1 Official Group / Makeblock xTool Official Group

• Support Center: support.xtool.com

• Technical Support: support@xtool.com

• xTool D1 Pro provides two color options. This user manual uses the golden red version to describe how to assemble and set up your machine.

Unbox and check

• Plate components

• Shaft

The secret to getting ahead is getting started. Are you ready to embark on a creative journey?Let’s go!

Assemble xTool D1 Pro

TIPS:
You can visit support.xtool.com or scan the QR code to find the tutorial video.

• The screws are used to set the tension of the timing belts. Do not fully tighten them. Otherwise, the timing belts may be damaged.

TIPS:
If you can’t put the shaft through the timing belt, the possible cause is that the timing belt is set too tight. You can adjust its tension by turning the screw.

• Keep a small distance between the coupling and the motor, or the coupling can’t rotate properly or emit noises.
• Slide the two sliders down against the front plate.

• Fully tighten the two screws.

TIPS:

• Pay attention to the front and back sides of the connector. Insert it properly.

• Cut off the white cable ties, and keep the black ones.
• No scissors are included in the pack.

• The screw is used to set the tension of the timing belt. Do not fully tighten it. Otherwise, the timing belt may be damaged.

• 80% done!
  • Excited to see your laser cutter begins to take shape! Success is just around the corner!

• Use the thumb screw to fit the laser module

• Turn the handle clockwise

• Hold the handle to draw it away from the thread part

• Rotate the handle to stop it from being blocked
  

• Release the handle

• Turn the handle clockwise again

You may need to repeat this process multiple times to tighten the thumb screw.

Use the thumb screw

• If the handle is blocked, you can tighten or loosen the screw as follows.

• Hold the handle to draw it away from the thread part

• Rotate the handle to stop it from being blocked The screw is not tightened or loosened.

• Release the handle

  • The handle goes back to the default position.

• Rotate the handle to tighten or loosen the screw

• Insert the TF card before using xTool D1 Pro. Otherwise, some functions may fail, such as Wi-Fi connection-based processing, offline processing, and Framing in processing preview.

Congratulations!

• You have completed the installation!
• We’ve got a little surprise in our software to make your first project creative and memorable.
• Download the software and get the novice task!

Meet your xTool D1 Pro

Set up xTool D1 Pro Adjust the tension of the timing belts

• Try to set the timing belts on the right and left plates to the same tension, so that xTool D1 Pro can cut and engrave materials properly.

Set the position of the laser module

• Put the focal length setting bar down
• Loosen the thumb screw on the other side and slide the laser module upward or downward
• After determining the position, tighten the thumb screw and put the focal length setting bar back

To cut thicker materials, you can adjust the position of the rear plate on the laser module, based on the scale with which the focal length setting bar is aligned, to ensure better cutting performance.

For the 20 W laser module

• By default, the focal length setting bar is aligned with scale 0. It’s recommended that you adjust the position of the rear plate according to the thickness of the material to be processed.
• After adjusting the position of the rear plate, you can still use the focal length setting bar to set the position of the laser module.

For the 40 W laser module

Tips: The settings are tested under a laboratory environment and are for reference only. The setting may vary according to material, so it is recommended you test the materials before starting to process.

Download and install software

• You can download xTool Creative Space (XCS) at our official website xtool.com or use the third-party software LightBurn to operate xTool D1 Pro.

Note: You need to purchase LightBurn before using it.

Create with example projects

TIPS:
Before starting your creation, you are advised to test the parameter settings and engraving performance first to prevent waste of materials. For example, you can engrave on an area near the edge of a material to see the engraving performance. For valuable items, especially, you can engrave on a substitute for testing.

• xTool D1 Pro is delivered with a material pack that allows you to start your creation.
• Scan the QR code to find example projects and tutorials. Alternatively, you can click Support on xTool Creative Space (XCS) and then choose xTool D1 Pro > xTool D1 Pro Example
• Project Files & Tutorials. You can download the example projects and follow the instructions to create your first works.

Before creating your works, you can place the aluminum sheet in the working area of xTool D1 Pro to protect your desk or floor from being smoked or burned.

TIPS:
If the aluminum sheet is not flat due to film removing, you can use masking tape to stick it on your desk or floor.

Use Rotary Attachment 2

TIPS: You can connect xTool D1 Pro to Rotary Attachment 2 to engrave cylindrical or irregular materials. Rotary Attachment 2 needs to work with a device and software. For details about how to use it, visit support.xtool.com.

• Place Rotary Attachment 2 parallel to the working area of xTool D1 Pro.
• Before you connect it to xTool D1 Pro , you may need to set its level based on the diameter of the material to be processed.

Level reference

• Set the level
  Use the changing of the level from C to B as an example.

Use the support module
The support module is applicable to the processing of irregular objects or objects that are too long for Rotary Attachment 2.

Set the support module

• Turn the knob clockwise to move the support wheels upward
• Turn the knob counterclockwise to move the support wheels downward

TIPS:
You can place the support module as required.

Clean the laser module

TIPS: For the 20W laser module, you are advised to clean it, including the inner and outer frames of the light shield, lens, and red light outlet, every time after it has been used for one consecutive hour.

When the light shield is dirty or laser beams can’t cut a material, you need to clean the laser module.

1. Turn off the device and remove the laser module from the device.
2. Remove the nozzle and its connector from the laser module.
3. Clean the inner and outer frames of the light shield with tissues or dust-free cloth moistened with alcohol; and clean the lens and red light outlet with a cotton swab moistened with alcohol.

References

• LightBurn Software
• xTool Support Center
• Smart Desktop Laser Cutter and Engraver | xTool Laser
• Smart Desktop Laser Cutter and Engraver | xTool Laser
• xTool Creative Space: Software Download for All xTool Machines

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>