WAVLINK UMD05 Pro USB C Docking Station User Manual

June 14, 2024
WavLink

WAVLINK UMD05 Pro USB C Docking Station

Safety Instructions

  • Always read the safety instructions carefully.
  • Keep this User Manual for future reference.
  • Keep this equipment away from humidity.
  • If any of the following situation arises, get the equipment checked by a service technician:
    • The equipment has been exposed to moisture.
    • The equipment has been dropped and damaged.
    • The equipment has obvious signs of breakage.
    • The equipment has not been working well or you cannot get it to work according to the user’s manual.

Copyright Statement
No part of this publication may be reproduced in any form by any means without prior written permission. Other trademarks or brand names mentioned herein are trademarks or registered trademarks of their respective companies.

Disclaimer
Information in this document is subject to change without notice. The manufacturer does not make any representations or warranties (implied or otherwise) regarding the accuracy and completeness of this document” and shall in no event be liable for any loss of profit or any commercial damage. including but not limited to special, incidental, consequential, or other damage.

WEEE Directive & Product Disposal
At the end of its serviceable life, this product should not be treated as household or general waste. It should be handed over to the applicable collection point for the recycling of electrical and electronic equipment or returned to the supplier for disposal.

Introduction

  • Built-in a slim, light, and miniature case, the MST dock is designed to meet more demands of extra USB peripherals and monitors. To extend or duplica spe content of sulAY sources, you can select either DP or HDMI port for display of high resolution.
  • Besides. you can also connect your laptop to the upstream USB-C port and get it charged. The dock also provides you with three USB 3.0 interfaces to enable you to enjoy high-speed data transfer.

Features

  • USB Power Delivery
    The upstream USB-C port is compliant with USB power delivery specification revision 3.0 and supports up to 100W power supply.

  • USB Data Transmission
    The MST dock has three USB 3.0 ports, providing your devices plenty of connection possibilities with data transfer rates up to 5Gbps.

  • Triple Display
    This MST dock has 3 different video ports, you can either select one port or combine two or all three of them for your own needs.

  • RJ45 Gigabit Ethernet
    Gigabit Ethernet port provides a high-speed network and is backward compatible with 10/100Mbps.

  • SD/TF Card Reader
    Support Secure DigitalTM v5.0 and SD v3.1 UHS-I.Support Card Reader SDHC/SDXC (Capacity up to 2TB).

Overview

  1. Gigabit Ethernet port

  2. 3 x USB 3.0 port

  3. 1 x DisplayPort

  4. 2 x HDMI port

  5. Upstream USB-C port

  6. Power port

  7. Power button

  8. USB 3.0 port with BC 1.2 fast charging

  9. Micro SD card reader

  10. 4-pole phone jack

  11. SD card reader

System Requirement

  • Windows 7/8/10/11
  • Mac OS Mojave 10.14 or later
  • CPU i7 or higher, RAM 4GB or above
  • Host PC/laptop supporting
  • PD 3. OPC/laptop with USB 3.1 full-featured Type
  • C port(Power Delivery, Displayport Alt mode. Data Transfer)

Single Display

Dual Display

Triple Display

Note:
If you want to use 3 displays with your PC/laptop simultaneously, please make sure that the Graphics card of the USB-C port supports at least 4 displays of DP ALT Mode, including your PC’s own screen. Check with your PC manufacturer on this. If your Graphics card doesn’t support 4 displays, please check Q&A Q2 for details.

Remarks for Windows-based PC/laptops:

  1. Before you connect two or three monitors, we suggest you lower monitor resolution, please check Q&A: Q3 for details.
  2. Before you connect the three monitors, we suggest you disconnect the laptop/PC first, please check Q&A: Q2 for details.

Remarks for Mac-based PCs/laptops:

  1. When you connect only one external monitor to the dock, the extend and mirror modes are both available.
  2. If you have two or three monitors connected to the dock, then you can only extend to one monitor while the other one or two monitor(s) will copy the same content on your extended monitor.

Installation

  • Before using this dock, please make sure that the latest PC/laptop drivers have been installed (including USB, graphics card, etc) because the network port needs specific drivers. For Windows 10, the system detects and automatically installs them after the dock is connected to the network. If drivers cannot be automatically installed, or the network port can’t perform properly, and then please install them manually. For the MAC OS system, you need to install the network port driver manually, please visit www.wavlink.com > Support > Driver PC peripherals > USB Docking.
  1. Connect the USB-C connector of the dock to your host laptop/PC. the LED light on the dock will turn blue.
  2. Connect your monitor(s) to the video ports of the dock then you can proceed to configure the display modes.
  3. Plug the power adapter of the dock in a power outlet.

Display Mode Setting

For Windows Users

  1. Right-click at any spot on your desktop and select “Display settings”.
  2. On “Display”, please select either monitor 1 or monitor 2.
  3. Scroll down to “Multiple displays”, and select the mode in the drop-down list that is fit for your need.

For MacoS Users

  1. Select “System Preferences” and then choose “Displays”.
  2. Click on “Arrangement” to change the position of displays currently connected.
  3. Select either extend or mirror mode on your demand.

Q&A

  1. Q1. How to figure out the maximum resolution (DP1.2/DP1.4) my laptop supports?
    A1.

  2. Firstly check the Graphics card version of your laptop: *Find “display adapter” in “Device Manager”.

  3. Check your Graphics card information with its manufacturer.

  4. Q2. Why doesn’t my third monitor display when I set the triple display mode?

  5. A2. Step 1: Choose the main display

  6. Right-click to select “Display settings”.

  7. Choose a monitor display and scroll down to “Multiple displays”.

  8. Mark “Make this my main display”.

  9. Step 2: Disconnect laptop display

  10. Select the laptop display (“1” is the default display for the laptop) and scroll down to “Multiple displays”.

  11. Select “Disconnect this display”, then the laptop display panel will become disconnected.

  12. Step 3: Turn on the third monitor display

  13. Choose the remaining monitor display, then scroll down to “Multiple displays”

  14. Select “Extend desktop to this display” to enable this display.

  15. Q3: Why are my 2K and 4K monitor displays abnormal when I set dual or triple display mode?
    A3. The resolution of some branded monitors cannot be adjusted automatically, the “Active signal resolution” of which is different from Windows setting “Desktop resolution”, hence you’d better set the resolution at the same value.

  16. Right-click and select “Display settings”.

  17. Select your monitor display and click on it, then scroll down to select “Advanced display settings”.

  18. Check if the resolution values of each monitor on “Desktop resolution” and “Active signal resolution” are the same.

  19. Click on “Display adapter properties for Display 2” and lower the resolution to the right value if the two values are different.

  20. Q4. Why does it show “slow charging” on my laptop?
    A4. Some users may notice that the charging status shows “slow charging”, this is because some series of laptops have protection protocol, especially laptops that have both Thunderbolt 3 port and over 100W external DC power adapter. Please use the original laptop charger to charge.

  21. Q5. What is High Dynamic Range (HDR)?
    A5. High Dynamic Range (HDR) creates much more lifelike experiences by allowing bright objects such as lights and highlights glinting off shiny objects to be displayed much more brightly than other objects in the scene. HDR also allows for more details in dark scenes. True HDR playback is not yet available on the built-in displays of laptops and tablets, many TVs and PC monitors start to build in HDR-10 with HDCP2.2 to support. Some of the key HDR content sources today are:

    • Streaming HDR (e.g. You Tube) & Streaming premium HDR (e.g. Netflix)
    • Local HDR Video Files
    • ULTRA HD Blu-ray*
    • HDR games//
    • HDR content creation apps

Also, if you need to stream HDR content with applications like Netflix and YouTube, make sure in Windows 10 the “Stream HDR Video” setting is “on” in the “Video playback settings” page.

CONTACT INFORMATION

Scan the QR code or load the link for Quick Start Guide and Driver downloading

www.wavlink.com/en_us/WL-UMD05-Pro

Facebook:

  • WAVLINK (@Wavlink Official)
  • WAVLINK SUPPORT (@Wavlink TechSupport)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals