MONDAWE X6 Intelligent Mood Lamp Bluetooth Speaker User Manual
- June 14, 2024
- Mondawe
Table of Contents
MONDAWE X6 Intelligent Mood Lamp Bluetooth Speaker
Specifications
- Product name:intelligent mood lamp speaker Mode:X6
- Charging input: DC5V=1A
- Battery capacity:3. 7V/2000mAh
- Charging time: about 2.5 hours
- Speaker specification: <D52mm
- Speaker unite: 4 ohms, 3W
- Lighting power: 2.4W.
- Material: ABS/ PP /Metal
- products size: 150x 48mm
- Frequency range: 50HZ – 20KHZ Distortion:<0.5%
- SNR: 65Db
- Bluetoolh Frequency:2.4 GHZ-2.BGHZ Bluetooth protocol:A2DP1 .2
- Bluetoolh version: V4.2
- Bluetooth distance: 10 Meter
BUTTON
Charging
Please make sure the unit is fully charged before using for the first time.
Charge the speaker using the provided USB cable by connecting ii to any
computer or 5V cell phone charger. The charging LED indicator will remain red
while charging and will turn off once the unit is fully charged. Charging time
is approximately 4 hours.
Power ON/OFF
Press the button ON/OFF to the “ON “,the device will be power on.move to OFF”
,the device will be power off.
Light Mode
The device has variety of light modes. Touching the speaker mesh for 5 seconds
will switch the unit between lamp mode and color mode.
- Lamp Mode: To activate lamp mode simply push the speaker mesh. This will set the lamp to its lowest mode. There are three levels to choose from: low, medium, and high bright. To increase lamp brightness, touch the speaker mesh until desired brightness is achieved. Once the lamp is at its brightest setting, touching the speaker mesh again will turn it off.
- Color light:You can change the speaker to multi-color mode (AKA cool mode) by touching the speaker mesh for 3 seconds. Once in this mode, touch the speaker mesh to change colors. Continue touching to reach color cycling mode and rhythm mode.
Mode switch
- There are two modes :Bluetooth,aux in mode, The default mode is Bluetooth,it will be aux in mode when inserting the aux in cable.
Bluetooth Mode
When the speaker is turned on it automatically enters Bluetooth mode. If the
unit has been previously paired, it will automatically connect to that device.
If no device has been paired, upon being powered on, the unit will enter
paring mode. The blue indicator LED will flash and you will hear voice
prompts. You may only connect one device at a time. To connect a different
device, be sure to turn off Bluetooth mode on the curently connected device
and follow the corresponding steps below.
When Power on speaker, if without connect the bluetooth after 10 minutes, the
bluetooth pairing function will be automatically turn off. If you want to re-
connect the bluetooth, need to turn off the power button and then turn on the
power to re-activate the bluetooth pairing function.
Mobile Device Pairing:
To connect your mobile device (phone, tablet, MP3 player) enter the Bluetooth
settings and search for nearby Bluetooth devices. When you see X6 in the list
of available devices, select it. If your device requires a password, enter
0000. Once succesfully paired. the blue indicator LED will stop flashing and
remain solid blue.
Connecting To Computer:
Connecting to a desktop computer or laptop is easy. First make sure that the
Bluetooth function is on by entering your computers Bluetooth settings and
turning it on. While in the Bluetooth menu find the device name X6 and select
it. Your computer should pair with the X6. Once succesfully paired, the blue
indicator LED will stop flashing and remain solid blue.
Bluetooth Music Playing
Open the player device when the connection is successful. Click to play music,
and the Bluetooth speaker will play the music.
You can operate the connected player to control play, pause, volume up and
down .
Bluetooth Hands free Call
Answer and hang up the phone.
There will be an alert sound from the speaker when there is a phone call.
Touch the top panel to answer and end the phone.
AUX Input
Use this 3.5mm jack to connect any external audio device such as a mobile
phone, MP3 player, tablet, lap top, or computer. When a 3.5mm cable is
connected, the unit automatically switches to AUX input mode.
Bluetooth connection notification:
-
If the speaker has been connected with Bluetooth devices before, it will connect with the last Bluetooth device automatically once it is turned on.
-
0ther phones or tablets can not be connected with the Bluetooth speaker when the speaker is being
connected with a phone or tablet. -
The phone or tablet can not be connected with the Bluetooth speaker if ii is connected with other Bluetooth devices. You should turn off your Bluetooth connection and connect your phone with the Bluetooth speaker.
Frequently Asked Questions
Unsuccessful pairing and connection repeatedly
- Check the speaker and make sure ii is in the searching state or reboot the speaker.
- Connection is difficult when there are too many Bluetooth devices nearby. Turn off other Bluetooth devices.
- Turn off the Bluelooth device that was connected with the Bluetooth speaker last time, and reconnect the speaker .
Muted or distorted sound
- Check the volume of your phone or the speaker, and adjust the volume.
- The battery is low. Please charge it.
Choppy music play
- Check if the device is beyond the effective connection distance.
- Check if there is any obstacle between the speaker and your device.
The indicator not shining in Bluetooth mode
- The battery is low. Please charge it.
- Please reboot the speaker.
Precautions
- Please store and use the product in room temperature environment.
- Do not expose this product in rain or wet conditions.
- Do not drop or bump this product.
- Do not disassemble, repair, or modify the product in private.
- Please use the power charge with rated voltage for the speaker.
- lt may cause hearing damage if playing music in high volume for a long time. Avoiding excessively high volume when playing music for a long time.
- Disassemble this product will invalidate the warranty.
Website: www.mondawe.com
Customer Service:service@mondawe.com
Phone:888-328-5111
Site Internet: www.mondawe.com
Email de Service Client:service@mondawe.com
NumE!ro de TE!IE!phone:888-328-5111
Intelligent Mood lamp bluetooth speaker
Please read this user manual carefully before using the device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>