MONDAWE 10 x 10 ft Louvered Pergola Instruction Manual
- June 13, 2024
- Mondawe
Table of Contents
10 x 10 ft Louvered Pergola
10 x 10 ft Louvered Pergola
ASSEMBLY INSTRUCTION
Step 1:
A/A1 foot pipe installation F and G First, F set into the A/A1 before
installing the G footplate
Use 2# bolts and spacers to fix them. 
Step 2:
Put A and A3 on both sides of B first, then repeat the same steps for A1 and
A2, installation instructions in step 3
Step 3:
Place tube B in the dotted line position
After inserting the B tube into the A and A3 foot tubes, secure them with
bolts.Then repeat the same steps for A1 and A2.
Note that A and A1 must be on the same side ， A2 and A3 must be on the same
side after the installation is completed. Step 4:
Repeat step 3 the figure below shows.
Step 5:
Insert the C/C1 tube into the A/A1 leg in accordance with figure below shows. and then bolt it into the A/A1 leg. Fixing
Step
6:
Install step 5 and step 3 together.
together, the bolt installation is the same as step 5
Step
7: Install the aluminum top plate, first the aluminum plate a head into the
plastic parts, the other end will first have a gap place into the plastic
parts, then use your hand to force the top plate, stuck into the plastic parts
can be, and then Then repeat the operation for the remaining top plate. See
the illustration on the right.
In the black area Snap the top plate into the
plastic part with force
Step 8:
After the top plate is installed, hang the rocker into the ring, shake
clockwise or counterclockwise with your hand. 