MONDAWE MOA041-S 10x13ft Patio Gazebo with Sidewalls Instruction Manual

MONDAWE MOA041-S 10x13ft Patio Gazebo with Sidewalls

Safety Information

Two people are required for this assembly.
Some parts may contain sharp edges.
Wear protective gloves.
When assembling and using this product, basic safety
precautions should always be followed to reduce the risk of personal injury and damage to equipment.
Please read all instructions before assembly and usage.

CAUTION: Do not climb on top of the gazebo. Falling off the gazebo can result in serious injury.

NOTICE: For outdoor use

DANGER: This unit is heavy! Do not assemble this item alone

WARNING: Do not leave the gazebo where there is a risk of high wind, as possible damage will occur to the structure.

WARNING: Keep all flame and heat sources away from this gazebo fabric.
This Gazebo is made with fabric that meets CPAl-84 specifications for flame resistance. It is not fire proof. The fabric will burn if left in continuous contact with any flame source. The application of any foreign substance to the gazebo fabric may render the flame-resistant properties ineffective.

content/uploads/2023/10/MONDAWE-MOA041-S-10x13ft-Patio-Gazebo-with-Sidewalls- Instruction-Manual-5.png)| 4
Lower Leg Post| A2| | 4
Short Side Beam 1| Cl| | 2
Short Side Beam 2| C2| | 2
Long Side

Beam

| D1| | 4
Long Side

Middle Beam

| D3| | 2
Upper Slant Bar| Gl| | 4
Lower Slant Bar| G2| | 4
Upper Top Bar| Hl| | 4
Lower Top Bar| H2| | 4
Short Extension Tube
Side Netting Rod| K4
El| | 4
4
Parts Name| Item No.| Parts Images| Qty
---|---|---|---
Middle Netting Rod| E2| | 2
Top Connector| J| | 2
Top Connect

Bar

| Tl| | 1
Big Roof Connector| T2| | 1
Big Canopy| 01| | 1
Small Canopy| 02| | 1
Sidewalls| Pl| | 4
Bolt AA| AA| | 2
Bolt BB| BB| | 22
Stake| II| | 8
Ring
Sandbags| LL|
| 36
4

Installation Instructions

1. Connect two Long Side Beams(D1) to Long Side Middle Beam(D3) by Bolt BB.
   

2. Connect Top Leg Post(A1) to assembled Long Side Beam(D1) by Bolt BB.
   

3. Connect Short Side Beam 1/2(C1/C2) to assembled Top Leg Post(A1) by Bolt BB.
   

4. Connect assembled Short Side Beam 1/2(C1/C2).
   

5. Insert Side Netting Rod(E1) into Middle Netting Rod(E2);
   Attach assembled Netting Rod to Long Side Beam(D1) by Bolt BB.
   

6. Connect Top Connector(J) and Top Connect Bar(T1);
   Attach Big Roof Connector(T2) to Top Connect Bar(T1),locking by Bolt AA.
   

7. Insert Lower Slant Bar(G2)to Upper Slant Bar(G1);
   
   Insert Lower Top Bar(H2)to Upper Top Bar(H1).

8. Attach Upper Top Bar(H1) to Top Connector(J);
   

9. Attach Upper Top Bar(H1) to Big Roof Connector(T2);
   

10. If assembled Middle Netting Rod(E2) is in wrong direction, attach it to Long Side Middle Beam(D3) by another one Bolt BB.
    

11. Insert Upper Slant Bar(G1) into Top Connector(J);
    

12. Put Big Canopy(O1) on big roof frame.
    

13. Insert Short Extension Tube(K4) into Upper Slant Bar(G1);
    

14. Put Small Canopy(O2) on small roof frame, fix four corners to Short Extension Tube(K4) and adjust tube to suitable length.
    

15. Insert Long Extension Tube(K5) into Big Canopy corner pocket, adjust the tube to suitable length.
    

16. Connect Lower Leg Post(A2) and Top Leg Post(A1).
    Attention: This step requires two persons.
    

17. Hang sidewalls(P1) on netting rod by Rings(LL).
    

18. Fix gazebo Lower Leg Post(A2) on the ground by Stakes(II
    

Sandbag

1. Open the bag and fill it with sand or something else heavy.
   

2. Zip up the sandbag.

3. Place the sandbag next to the lower post.
   

4. Fix the bag to the leg by velcro.
   
   

Customers Support

Website:www.mondawe.com
Customer Service:service@mondawe.com
Phone:888-328-5111

References

• Mondawe

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>