VEVOR 0010 Larger Built in Floor and Mesh Screen Tent Station User Manual
- June 14, 2024
- VEVOR
Table of Contents
VEVOR 0010 Larger Built-in Floor and Mesh Screen Tent Station
Product Information
Specifications
| Model | Size | Material | Color | Ventilation Window Size | Pole Size |
|---|---|---|---|---|---|
| 0010 | 906262 in | Oxford-fabric 210D | White | 60*40cm | 8.5mm |
| 0011 | 1208472 in | Oxford-fabric 210D | White | 60*40cm | 8.5mm |
Package Content
The package includes:
- Portable Paint Booth
- Pole (2 pieces)
- Stake (4 pieces)
- Storage Bag
- Plastic Wrap
- User Manual
Product Diagram – Model 0010
| No. | Item | Qty |
|---|---|---|
| 1 | Portable Paint Booth | 1 |
| 2 | Pole | 2 |
| 3 | Clip | 16 |
| 4 | Rope | 2 |
| 5 | Front Gauze Curtain | 1 |
| 6 | Foot Clasp | 4 |
| 7 | Ventilation Window | 1 |
Product Diagram – Model 0011
| No. | Item | Qty |
|---|---|---|
| 1 | Portable Paint Booth | 1 |
| 2 | Pole | 2 |
| 3 | Clip | 16 |
| 4 | Rope | 2 |
| 5 | Front Gauze Curtain | 1 |
| 6 | Foot Clasp | 4 |
| 7 | Ventilation Window | 1 |
- Storage Instructions
To store the tent
- Take out the four corners of the stakes.
- Untie the knot in two places.
- Release clips (16pcs).
- Take out all four corners of the poles, as shown in the picture.
- Pull the two poles out of the tent.
- Put the combination rod away as shown in the figure and put it into the storage bag.
- Lay the tent flat and fold it as shown in the picture.
- Roll the bagging poles and tent together and load into the large storage bag as shown in the picture.
Product Usage
For detailed instructions on how to use the product, please refer to the
user manual provided with the package.
Troubleshooting, Maintenance, and Repair
If you encounter any issues with the product or require maintenance or
repair, please refer to the user manual or contact our customer service at
CustomerService@vevor.com.
FAQ
Q: Where can I find support and an e-warranty certificate
A: You can find support and e-warranty certificates at
https://www.vevor.com/support.
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
SAFE INSTRUCTIONS
Warning:
- Spray paints and solvents can be dangerous if inhaled. Ensure you have good ventilation at all times
- Keep away from heat, sparks, and open flames when painting. Don’t smoke.
- When painting, make sure to keep the ventilation.
- Paint is harmful to the body. Avoid contact with eyes and skin. Please take good
protection
- When painting, avoid prolonged exposure to the sun.
- When painting, lighting and electrical devices must be properly protected to avoid
accidents or personal injury.
- For best results, avoid painting in hot, humid weather.
- Recycle the used paint cans to avoid environmental damage.
CAUTION: Carefully read instructions and procedures for safe operations.
PRODUCT INTRODUCTION
Model
SPEC.
| 0010| 0011
---|---|---
Size| 906262 in| 1208472 in
Material| Oxford-fabric 210D| Oxford-fabric 210D
Color| White| White
Ventilation window| 6040cm| 6040cm
Pole| φ8.5mm| φ8.5mm
PACKAGE CONTENT
Model
Parts
|
0010
|
0011
---|---|---
Portable Paint Booth| ×1| ×1
Pole| ×2| ×2
Stake| ×6| ×6
Storage Bag| ×1| ×1
Plastic Wrap| ×1| ×1
User Manual| ×1| ×1
program diagram
| No. | Item | Qty |
|---|---|---|
| 1 | Portable Paint Booth | 1 |
| 2 | Pole | 2 |
| 3 | Clip | 16 |
| 4 | Rope | 2 |
| 5 | Front Gauze Curtain | 1 |
| 6 | Foot Clasp | 4 |
| 7 | Ventilation Window | 1 |
| No. | Item | Qty |
|---|---|---|
| 1 | Portable Paint Booth | 1 |
| 2 | Pole | 2 |
| 3 | Clip | 16 |
| 4 | Rope | 2 |
| 5 | Front Gauze Curtain | 1 |
| 6 | Foot Clasp | 4 |
| 7 | Ventilation Window | 1 |
INSTALLATION INSTRUCTION
- Unfold the tent and spread it out on a clean and level surface with the opening oriented towards the front
- Lay out two of the long poles and interlock all segments
- Insert poles through the tent sleeves, forming an “X” shape on the sides of the tent.
- Insert the four ends of the two poles into the bottom of the four corners of the tent, as shown in the picture
- Attach frame clips located in the tent section to the tent and clip them into place.
- Tie a bow on the side of the tent where the two poles form an “X”.
- If you need to use the tent on grass, please fasten the tent with stakes at the bottom loops and corners.
Storage
- Take out the four corners of the stake
- Untie the knot in two places
- Release clips (16pcs)
- Take out all four corners of the poles, as shown in the picture
- Pull the two poles out of the tent.
- Put the combination rod away as shown in the figure and put it into the storage bag.
Lay the tent flat and fold it as shown in the picture.
Roll the bagging poles and tent together and load into the large storage bag as shown in the picture.
OPERATION GUIDE
- Assemble the portable paint booth.
- Roll up the front gauze curtain.
- Cover the bottom with the plastic wrap.
- The portable paint booth is ready for use.
Attention： This product is not waterproof. Please do not use it outdoors in rainy days. For larger furniture, it is recommended to paint the front and top first and then dry the bottom and back. For Small furniture, it is recommended to configure a rotating tray, small furniture placed on the rotating tray spray paint.
TROUBLESHOOTING, MAINTENANCE, AND REPAIR
- To remove stains, clean with cold water and use mild remover if necessary. Do not use a strong stain remover to avoid damage to the fabric or local fading.
- Do not use a washing machine or dryer to clean the tent to avoid causing fabric damage.
- After cleaning, please spread the tent indoors or outdoors in a cool place to dry; Do not expose it to the sun to avoid damage to the fabric.
- Check the tent regularly to see if there is any damage. If there is any damage, please repair it in time. You can use a waterproof repair subsidy to repair the damaged parts.
- Check the pole after each use. If damaged, replace it in time.
- Please store the tent in a dry and cool place, away from direct sunlight and damp places.
- When the tent is stored, try to let it loose naturally, which can extend the service life of the tent, and put some desiccant to moisture-proof.
Manufacturer : Zhejiang Roy Industrial Co., Ltd
Add: No.8, Juhai Second Road, Qujiang District, Quzhou City, Zhejiang
Province
Support and E-Warranty Certificate https://www.vevor.com/support
We continue to be committed to offering tools at competitive prices. “Save Half”, “Half Price” , or any other similar expressions used by us only represent an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and do not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when placing an order with us if you are saving half in comparison with the top major brands.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>