Kimberly-Clark 48856 Electronic Hard Roll Towel Dispenser User Manual

Kimberly-Clark 48856 Electronic Hard Roll Towel Dispenser

Introduction

The Kimberly-Clark 48856 Electronic Hard Roll Towel Dispenser combines innovative technology with practical functionality to provide an efficient and hygienic solution for hand towel dispensing in various settings.

Specifications

What’s in the Box

1. Kimberly-Clark 48856 Electronic Hard Roll Towel Dispenser
2. Mounting hardware
3. User manual

Key Features:

1. Touchless Operation:
   • Infrared technology for hygienic hands-free dispensing.
2. High Capacity:
   • Accommodates large rolls to minimize refilling frequency.
3. Battery Indicator:
   • LED indicator for battery status.
4. Adjustable Settings:
   • Customizable settings for sheet length and dispensing sensitivity.

How to Use

1. Loading Towels:
   • Open the dispenser and load a new hard roll of towels according to the provided instructions.
2. Powering On/Off:
   • Activate the dispenser by turning it on/off using the designated control.
3. Adjusting Settings:
   • Use the control panel to adjust settings such as sheet length and sensitivity.

Safety Precautions

1. Installation Safety:
   • Follow the installation instructions provided in the manual carefully. Make sure the dispenser is securely mounted to a stable surface to prevent accidents.
2. Electrical Safety:
   • If the dispenser requires electrical power, use the specified power source and ensure that the electrical components are in good condition. If there are any damaged cords or components, do not use the dispenser until repairs are made.
3. Proper Usage:
   • Use the dispenser only for its intended purpose, which is typically dispensing hard roll towels. Avoid using the dispenser for any other materials or purposes.
4. Accessibility:
   • Install the dispenser at a height and location that is accessible to a diverse range of users, including those with disabilities.
5. Maintenance:
   • Regularly inspect and maintain the dispenser according to the guidelines provided in the user manual. This may include cleaning, replacing parts, and addressing any issues promptly.
6. Hygiene:
   • Promote good hygiene practices around the dispenser. Encourage users to wash their hands before using the dispenser, and clean the dispenser regularly to prevent bacterial growth.

Maintenance

1. Regular Cleaning:
   • Clean the exterior of the dispenser regularly with a mild detergent and a soft, damp cloth.
   • Avoid using abrasive cleaners or solvents, as they may damage the surface.
2. Clean Sensors and Optics:
   • If the dispenser uses electronic sensors or optics, clean these components according to the manufacturer’s recommendations.
   • Use a soft, lint-free cloth to wipe sensors to ensure proper functionality.
3. Inspect for Damage:
   • Regularly inspect the dispenser for any signs of damage, including cracks, broken parts, or malfunctioning components.
   • If you notice any issues, contact Kimberly-Clark’s customer support or follow the procedures outlined in the user manual for troubleshooting.
4. Refill Promptly:
   • Refill the dispenser with hard roll towels promptly to avoid running out of supplies.
   • Follow the recommended loading procedures outlined in the user manual to prevent jams or other issues.
5. Battery Replacement:
   • If the dispenser is battery-powered, replace the batteries according to the specified schedule in the user manual.
   • Use the correct type of batteries as recommended by the manufacturer

Troubleshooting

1. Dispenser Not Operating:
   • Ensure that the dispenser is powered on. Check the power source and replace or recharge batteries if applicable.
   • Confirm that the dispenser is properly installed and securely mounted on the wall.
2. Sensor Issues:
   • If the dispenser has an electronic sensor, ensure it is clean and free from any debris or obstructions.
   • Check the sensor’s sensitivity settings if applicable, and adjust according to the user manual.
3. Paper Jam:
   • If the dispenser experiences a paper jam, follow the manufacturer’s guidelines for clearing paper jams. This may involve opening the dispenser and removing any trapped paper.
4. Low Battery Indicator:
   • If the dispenser is battery-operated and equipped with a low battery indicator, replace the batteries promptly to ensure proper functionality.
5. Check for Error Codes or LED Indicators:
   • Review the user manual for any error codes or LED indicators that may provide information about the issue. Follow the recommended steps to address specific error codes.
6. Refill Issues:
   • Ensure that the paper roll or towel refilling process is performed correctly. Incorrect loading can lead to dispensing problems.

FAQs

What is the Kimberly-Clark 48856 Electronic Hard Roll Towel Dispenser?

The Kimberly-Clark 48856 Electronic Hard Roll Towel Dispenser is a touchless, electronic dispenser designed for dispensing hard roll paper towels in a hygienic and efficient manner.

How does the electronic dispensing feature work?

The electronic dispenser uses motion-sensor technology to detect a user's hand and dispenses a controlled amount of paper towel when hands are placed below the sensor, reducing waste and promoting hygiene.

What type of paper towels are compatible with this dispenser?

This dispenser is typically designed to work with Kimberly-Clark hard roll paper towels, but it may also be compatible with other brands of similar roll towels.

Is it suitable for high-traffic restrooms and commercial settings?

Yes, the Kimberly-Clark 48856 dispenser is designed for high-traffic restrooms and commercial environments, making it suitable for use in various facilities.

Is the dispenser easy to install?

Installation of the dispenser is usually straightforward, with mounting hardware included. However, it's recommended to follow the provided installation instructions for best results.

Does it require electrical wiring for operation?

Yes, this electronic dispenser typically requires electrical wiring for its sensor-based operation. It may also run on batteries, depending on the specific model.

Is there a refill indicator or low-paper warning?

Some models of the Kimberly-Clark 48856 dispenser may include a low-paper warning indicator, alerting you when it's time to replace the paper roll.

Can the dispenser be adjusted for different sheet lengths?

Depending on the model, the dispenser may offer adjustable settings for sheet length, allowing you to customize the amount of paper towel dispensed per use.

Is it easy to maintain and clean?

The dispenser is designed for easy maintenance and cleaning. Regular cleaning and maintenance help ensure its optimal performance and hygiene.

Is there a warranty for the Kimberly-Clark 48856 Electronic Hard Roll Towel Dispenser?

The dispenser may come with a limited warranty. Users are advised to check the product documentation or contact the manufacturer for warranty details.

Is the dispenser vandal-resistant?

Depending on the model, the dispenser may include vandal-resistant features to deter tampering or misuse in public settings.

Can it be used with recycled paper towels?

The dispenser can typically be used with recycled paper towels, helping to promote sustainability and reduce environmental impact.

Are there any special maintenance requirements for the electronic components?

It's advisable to follow the manufacturer's recommendations for maintaining the electronic components to ensure the long-term functionality of the dispenser.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>