inateck ST1004 SSD Mounting Bracket Instruction Manual
- June 14, 2024
- inateck
Table of Contents
inateck ST1004 SSD Mounting Bracket
INSTRUCTION
One Drive
- Put the drive at the bottom of the stand and twist the screws (see photo)
- Refer to Part A about the installation of bottom drive.
- Refer to Part A about the installation of bottom drive.
Two Drives
- Put the side wings in place by aiming right towards the holes, and upward twist the screws fast (see photo)
Finally, please connect SATA cable to the drive(s) and put stand into the slot of computer case.
FCC Declaration of Conformity
This device complies with Part 15 of the FCC Rules Operation is subject to the
following two conditions: (1}
This device may not cause harmful interference, and (2) This device must
accept any interference received, including interference that may cause
undesired operation.
EU Declaration of Conformity
Inateck Co., Ltd. hereby declares that this device complies with the Directive
2014/30/EU. A copy of the Declaration of Conformity can be accessed from
https://www.inateck.de/pages/euro-compliance.
Service Center
Europe
F&M Technology GmbH
Tel: +49 341 5199 8410 (Working day 8 AM – 4 PM CET)
Fax: +49 341 5199 8413
Address: Fraunhoferstraße 7, 04178 Leipzig, Deutschland
North America
Inateck Technology Inc.
Tel: +1 (909) 698 7018 (Working day 9 AM – 5 PM PST)
Address: 2078 Francis St., Unit 14-02, Ontario, CA 91761, USA
F&M Technology GmbH
Fraunhoferstraße 7, 04178 Leipzig, Deutschland
Tel: +49 341 5199 8410
Inateck Technology (UK) Ltd.
95 High Street, Office B, Great Missenden, United Kingdom, HP16 OAL
Tel: +44 20 3239 9869
Manufacturer
Shenzhen Inateck Technology Co., Ltd.
Address: Suite 2507, Block 11 in Tian An Cloud Park, BantianStreet, Longgang
District, Shenzhen, Guangdong,
China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>