MUNBYN ITPP129S Wi-Fi Thermal Label Printer User Manual

MUNBYN ITPP129S Wi-Fi Thermal Label Printer User Manual

ITPP129S

MUNBYN
More Choice
For Your Growing Business

1 . Product Introduction

1.1 What’s in the box?

• If contents are missing or damaged, please contact us.

1.2 Product features

2. Set Up The Printer

2.1 Printer Quick Connect

2.2.Paper Setup

Automatic label identification:

• Load no less than 4 consecutive labels into the printer.
• After the paper is stable, press and hold feeder button, until you hear a beep.
• Then, the printer will automatically label identification.

3. Device Connection

3.1.Connect to Phone

If your mobile needs a PIN password, please enter “0000”.
Note: Due to the mobile phone system requirements, the app needs to access your location services information, you’ll get a notification requesting permission. You need to enable GPS and confirm authorization (Android only)

3.2.Connect to Windows

1. Follow 3.1 to configure the network for the printer
2. After the printer has a network configured, Press the feed button on the printer until the blue light flashes once to print a self-page and check the printer’s Wi-Fi IP.

3. Open the Windows printer driver, select the WIFI Windows driver download link: munbyn.biz/129swind

4. Enter the printer Wi-Fi IP, select Next, and follow the driver installation until finished.

Note:

• The PC-connected network must be the same as the printer Before printing,
• check whether the printer’s Wi-Fi IP matches the IP in the PC. If the IP has changed, go to Control Panel, right-click the printer, and select Printer Properties -> Tool to change the IP.

3.3.Connect to Mac

1. Follow 3.1 to configure the network for the printer and obtain the network IP address
2. After the printer has a network configured, Press the feed button on the printer until the blue light flashes once to print a self-page and check the printer’s Wi-Fi IP.
3. Install the printer driver and follow the driver installation until finished. Mac driver download link: munbyn.biz/129smacd

4. Go to Printers & Scanners, and select the + icon to add a device.

5. Select IP and enter the printer Wi-Fi IP in the Address. Then select HP Jetdirect – Socket protocol and select Munbyn-ITPP129S-Wi-Fi in Use of Printer Software.

Note:

• The PC-connected network must be the same as the printer check whether the printer’s Wi-Fi IP matches the IP in the PC. If the IP has.
• Before printing, check whether the printer’s Wi-Fi IP matches the IP in the PC, If the IP has changed, delete the old printer, and re-add the changed printer follow the steps above.

4. Feeder Button instruction

5. LED Status

6. PRO Tips

• When you change other size label，run the automatic label identification
• Press the circle feeder button on the printer to ship a blank label
• To run a self-test: press and hold the feeder button until the blue light flash once
• Avoid poor quality labels as they can damage the printer and print not clear
• If the paper is jammed and the led status show blue flashing slowly，run automatic identification

7. FAQ

FAQ file, Please visit: www.bit.ly/129Sfaq

8. Specification

9. Safety Notices

• The printer head can become very hot after printing labels. Do not touch the printer head.
• Do not bend the power cord excessively or place objects on the cord.
• Do not use the printer if you find any irregularities as these could result in fire or electrocution.
• Keep the printer out of reach of children.
• Use only approved accessories and do not try to disassemble, repair the unit by yourself.
• Keep the printer away from water and other objects that could penetrate the components.
• Please unplug the printer when it is not in use for long periods.

10. FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.
• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two

11. Tech Support

E-mail: support@munbyn.com
Whatsapp: +86 1 781 788 1067
Phone: +1 650 206 2250
Skype: munbyn
Support Time: Monday to Friday 24 hours.

Support Time: Monday to Friday 24 hours.
MUNBYN provides 18 months’ warranty and lifetime free service.
If you encounter any issues with the product, please contact the MUNBYN team to promptly receive troubleshooting tips or a replacement.

Website: www.munbyn.com

(how-to videos, warranty details)

Read More About This Manual & Download PDF:

References

• Munbyn-Mac-Driver-v1.4.0.dmg - pCloud
• Munbyn-Windows-Driver-v1.4.1.exe - pCloud
• MUNBYN® Official: Thermal Label Printer and Shipping Labels

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>