eta 859890040 Electric Kettle User Manual

: June 14, 2024
: ETA

Table of Contents

eta 859890040 Electric Kettle
Specifications
INSTRUCTIONS FOR USE
SAFETY WARNING
DESCRIPTION OF THE APPLIANCE
INSTRUCTIONS FOR USE
MAINTENANCE
MAINTENANCE
ENVIRONMENT
TECHNICAL DATA
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

eta 859890040 Electric Kettle

Specifications

Voltage: 1.7V
Absorbed Power: 1.2W
Max. Volume: 221 x 150 x 235mm
Weight: 0.00kg
Protection Class: I

Description of the Appliance

The electric kettle is equipped with a steam sensor that automatically switches off the appliance after reaching the boiling point.

INSTRUCTIONS FOR USE

Dear customer, thank you for purchasing our product. Keep these instructions including the warranty, the receipt and, if possible, the box with the internal packing.

SAFETY WARNING

Consider the instructions for use as a part of the appliance and pass them on to any other user of the appliance.
Check whether the data on the type label correspond with the voltage in your socket.
The power cord plug has to be connected to the properly connected and grounded socket according to the national standard.
This product can be used by children at the age of 8 years and older if they are supervised or if they were instructed regarding use of the appliance in a safe way and if they understand possible risks. User cleaning and maintenance must not be performed by children if they are younger than 8 year and unsupervised. Children younger than 8 years must be kept out of reach of the appliance and its power cord.
The device may be used by persons with reduced physical or mental abilities or lack of experience and knowledge only if they are under supervision or they have been instructed about using the appliance safely and understand the potential dangers.
Children must not play with the appliance.
The electric kettle is intended for heating the maximum of 1.7 l of water. If the water level exceeds the maximum recommended amount, hot water may be splashing out.
WARNING: Do not open the lid if the water is boiling or if it is hot.
CAUTION: Do not use the appliance with a program, time switch or any other part that turns the appliance on automatically as there is a risk of fire if the appliance is not covered or placed properly.
When the appliance is in operation, prevent pets, plants or insects to get in contact with it.
Do not plug the fork of the supply cord into the power outlet and do not unplug the cord with wet hands or by pulling by the supply cord!
Use the electric kettle with the stand designed for this type only and only for its intended purpose.
Prevent injuries when handling (e.g. by hot water, steam).
The appliance is equipped with the heat safety lock which disconnects power supply if the steam sensor fails, if water boils away or if an empty kettle is turned on. If it happens, unplug the appliance from power supply and let it cool down. Do not fill the kettle with cold water in order to cool it down quickly. It could reduce life of the heating element.
Use this appliance only for the purpose for which it was designed as specified in this user‘s manual. Never use the appliance for any other purpose.
The producer is not responsible for damage caused by improper use of the appliance (e.g. burning, scalding, fire) and its guarantee for the appliance does not apply to situations when the safety warnings above are not complied with.

DESCRIPTION OF THE APPLIANCE

A – electric kettle

A1 – off/on button 0/I (steam sensor switch*)
A2 – control light
A3 – water gauge
A4 – handle

B – removable stand

B1 – central connector
A5 – lid
A6 – lid lock button A7 – filtration sieve
A8 – sieve cover
B2 – power cord
The steam sensor ensures automatic switch off the appliance after reaching the boiling point.

INSTRUCTIONS FOR USE

Remove all the packing material and take out the electric kettle with the stand. Remove all possible adhesion foils, stick-on labels or paper from the appliance. Fill the kettle with clean cold water up to max., turn it on and let the water boil before first use. Then Pour the water out and repeat the process several times (at least five times). You will boil the kettle out properly this way and get rid of potential taste of plastic. If you feel like you have aftertaste of plastic from boiled water, we recommend to repeat the procedure according to the instructions in the paragraph IV.

MAINTENANCE

cleaning the kettle. Another recommendation is to leave the empty kettle open for 24 hours.
The material of the kettle coming in touch with water is approved of sound health properties. Potential slight “smell” or „aftertaste of plastic” during first use after unpacking the kettle is a common case and should not be a reason for returning the appliance. Unwind the necessary length
of the power cord B2 from the storage space of the stand B. Place the stand on a suitable surface, in the height of about 85 cm, out of reach of children and incapacitated persons (see par.
SAFETY WARNING ) and plug the fork of the power cord to the electric socket. Hold the kettle A on the handle A4. Open the lid A5 by pressing the lock button A6. Fill the kettle with drinking water.
The minimum and maximum amount of water is marked on the water gauge (on the picture) A3. Close the lid by snapping. Put the electric kettle on the stand and turn it to the I position by the A1 button. Function of the electric kettle is signaled with the control light A2. After boiling the appliance switches off automatically. Before reaching the boiling point, you can switch off the appliance by turning the A1 button to the 0 position. Always use fresh drinking water for boiling.

ATTENTION

When heating water, the lid must be closed, otherwise the steam sensor will not be working.
In bigger tilting of the electric kettle backwards, particularly when it is filled up to maximum, water can flow out from the electric kettle in the bottom part of the kettle. This does not affect safety or other functions and it does not mean any failure of the electric kettle. In the case of tilting the electric kettle with hot water there is a risk of scalding. Therefore do not tilt the electric kettle.
Make sure the sieve and its cover is fit on thorougly in the upper part of the kettle in order that it does not fall to the bottom!
If the kettle was removed from the stand during boiling, remains in ON position. This means that if you put it back on the stand, it will immediately continue in heating.
Recommendation: When the kettle is not used, do not place it on the stand connected to the mains. If you are going not to use the kettle for a long time, unplug the power cord from the wall socket.

MAINTENANCE

Clean the kettle only when it is cooled down! Do not use rough and aggressive detergents (e.g. sharp objects, scrapers, diluting agents or other solvents)!
The casing of the electric kettle and the heating bottom is made of top- quality stainless steel, but in common use, impurities from water get stuck on them (water scale), particularly above the heating element. It is not rust or another material defect of the kettle container and the appliance is not subject to a complaint for this reason.

Cleaning the kettle

Pour about 50 g citric acid to the kettle with the water scale sediment. Fill the kettle to about one half and mix. After it dissolves, fill the kettle to 3/4 of the maximum amount of water. Place the electric kettle on the stand and turn it on. Before boiling, turn off the kettle, let the solution take effect for about 10 minutes and then pour it out.
Clean the kettle thoroughly with clean water. Repeat the whole procedure if the kettle is too soiled. Clean the electric kettle regularly!

Cleaning the sieve (A7)

Take the sieve from the kettle. Clean it from possible sediments in running water using a fine brush. Then put the sieve back in the opposite way.
Expert service must do the large maintenance or to intervene into inside parts of the appliance! Non-observance of the instructions of the manufacturer cancels the right for guarantee repair!

ENVIRONMENT

Printed signs of materials used for manufacture, packing, components and accessories, as well as their recycling, are on all the pieces if their dimensions enable it.
The symbols on the product or in the accompanying documentation mean that the used electric or electronic products must not be disposed together with municipal wastes. Please, hand them over to the collection points designed for their correct disposal, where they will be accepted free of charge.
By correct disposal of this product you can help to preserve valuable natural resources and help to prevent possible negative impacts to the environment and to human health, which could be the results of incorrect waste disposal. For further details ask the municipal authorities or the nearest collecting point. Penalties can be charged for incorrect disposal of such wastes, according to national regulations.
If the appliance is to be put out of operation definitely, we recommend cutting off the feeder cable, to disable its use.

TECHNICAL DATA

Voltage (V)
Absorbed power (W)
Max. volume (l)
Weight (kg) approximately Protection class of the appliance Size, (mm):
Input in off mode is shown on the type label of the appliance shown on the type label of the appliance 221 x 150 x 235

The manufacturer reserves the right to change the technical specifications and accessories for the respective models.

HOT. DO NOT COVER. HOUSEHOLD USE ONLY. CAUTION: BE CAREFUL OF STEAM. DO NOT IMMERSE IN WATER OR OTHER LIQUIDS.
TO AVOID DANGER OF SUFFOCATION, KEEP THIS PLASTIC BAG AWAY FROM BABIES AND CHILDREN. DO NOT USE THIS BAG IN CRIBS, BEDS, CARRIAGES OR PLAYPENS. THIS BAG IS NOT A TOY.