KLARUS K10 10th Anniversary Limited Edition Instruction Manual
- June 5, 2024
- KLARUS
Table of Contents
KLARUS K10 10th Anniversary Limited Edition
Specifications
- Model: K10
- Dimensions: 24mm(0.94”) x 24mm(0.94”) x 97.8mm(3.85”)
- LED: CREE XP-L HD V6
- Output: 1200LM
- Input Voltage: 2.0-4.2V
- Recharging Voltage: 5V/2A
- Battery: 1 x 16340(1 x CR123A compatible)
- Waterproof Rating: IPX8
- Weight: 87.9g(3.10oz)/60.3g(2.13oz)（w/o Battery）
- Warranty: 5 years
Package
| Product | Product | Charging Cable | Manual | O Ring | Battery |
|---|---|---|---|---|---|
| QTY | 1 | 1 | 1 | 1 | 1 |
Mode
Specification
| Turbo| High| Medium| Low| Strobe| SOS
---|---|---|---|---|---|---
ANSI lumens(LM)| 1200
300
| 350| 100| 10| 1200| 100
Runtime(h)| 1.5min
+1.4
| 1.7| 7.5| 55| 3| 12
Beam intensity(cd)| 8500| 2496| 700| 50| |
Beam distance(m)| 185| 100| 53| 14| |
Impact resistance(m)| 1
Waterproof| IPX8(2 Meters Submersible)
Note: The above data are collected by Klarus under laboratory conditions. Different conditions may result in different data in use.
Instructions
- Switch Settings(default: Tactical Setting)
When OFF, press and hold MODE switch for 5 seconds. Press down MAIN switch when the Indicator Lamp flashes Red/Green to complete Setting switch.
Mode Controls
- Mode 1: Tactical Mode
- ON/OFF
- Primary Switch: Click to turn ON at High, click again to turn OFF.
- MODE Switch: Press to turn on STROBE, press and hold for 2 seconds for CONSTANT
- STROBE: Output Adjustment
- MODE Switch: Press to change output in order of Turbo→ High→ Medium → Low → Cycle; hold for 2 seconds to enter STROBE mode.
- Mode 2: Outdoor Setting
- ON/OFF Primary Switch: Click to turn ON at HIGH, click again to turn OFF.
- MODE Switch: Press to turn ON at LOW, press and hold for 1 second for CONSTANT LOW.
Output Adjustment
MODE Switch: Press to change output in order of Low→Medium→ High→Turbo→Cycle; press and hold for 3 seconds to enter SOS mode.
Lock / Unlock
Loosen the tail cap half a circle to lock disable the flashlight’s functions, tighten the tail cap to unlock and enable functions. (Locking the light is recommended during travel or long term storage)
Intelligent Temperature Control System
When at maximum output, the flashlight will automatically adjust output based on the surface temperature, in order to protect the LED and components, and increase in-hand comfort.
Capacity Indicator
The indicator lamp will turn on to display battery capacity for 5 seconds after the flashlight is turned ON. The indicator lamp will turn off after 5 seconds.
- Green: 70%-100%;
- Orange: 30%-70%;
- Red: <30%;
- Red Flashing: <10%; (Please recharge the battery ASAP)(Only applies to 16340 Lithium-ion battery)
Klarus offers a 1-year warranty for all rechargeable batteries.
Limited Lifetime Warranty
If problems develop after 5 years from the date of purchase, KLARUS will charge for parts and repairs. The total repair fee will be assessed according to the cost of the replacement materials. If damage to the light is substantial, KLARUS will contact the customer via the dealer with a quote.
- If this flashlight does not perform as specified, the product will be repaired or replaced as described above.
- Please contact your original KLARUS dealer for replacement and repairs. Warranty Procedure
- If the warranty issue cannot be resolved by the dealer, please contact KLARUS at service@klaruslight.com for assistance. Please provide the following information to expedite the process:
- List the serial number on the light.
- Include a detailed description identifying the issue, accompanied by pictures or a short video demonstration if necessary.
- Provide the name and store of the dealer you made the purchase from; and a copy of the proof of purchase.
Note
- Product specifications of this printing is accurate, any updates will be reflected in the physical product. There may be slight difference between photographic and actual product.
- KLARUS reserve the right to make the final determination of terms and conditions in this manual.
- Scan the QR code and receive the latest update from KLARUS media account or KLARUS official website.
Scan the QR code and received the latest updates from KLARUS media account or KLARUS official website.
Website Facebook
KLARUS LIGHTING TECHNOLOGY CO., LIMITED
- Address: 8/F, E Building, Longjing Industrial Science Park, 335 Bulong Rd, Bantian St. in Longgang District, Shenzhen, China, 518000.
- Phone: +86-755-27700110
- Email: service@klaruslight.com
- Website: www.klaruslight.com