Kanlux RAIBO E27 Desk Lamp Instruction Manual
- June 11, 2024
- Kanlux
Table of Contents
Kanlux RAIBO E27 Desk Lamp
Product Information
- Model: RAIBO
- Product Code: 2022/07-1
- Size: A3-297x420mm/ISO216
- Manufacturer: www.kanlux.com
- Power: 220-240V~
- Frequency: 50Hz
- Light Source: LED
- Lamp Holder Type: E27
- Maximum Wattage: 5W
- IP Rating: IP20
INTENDED USE / APPLICATION
Product designed to be used in the home and for other similar general
applications.
MOUNTING
Mounting should be performed by an appropriately qualified person. Check for
proper mechanical fastening and connection to electrical power prior to first
use. Technical changes reserved. Read the manual before mounting. Any
activities to be done with disconnected power supply. Exercise particular
caution. The product can be connected to a supply network which meets energy
quality standards as prescribed by law. Do not exceed the maximum load power:
see pictures. 
Product Usage
- Ensure the power supply is switched off before installing the RAIBO lamp.
- Insert the LED bulb into the E27 lamp holder. Ensure that the bulb is securely fitted and screwed in tightly.
- The maximum wattage of the bulb should not exceed 5W, and the minimum distance between the lamp and any object should be 0.1m.
- Connect the lamp to a power supply of 220-240V~, 50Hz.
- The RAIBO lamp is suitable for indoor use only, with an IP20 rating.
- If the lamp is not functioning correctly, switch off the power supply and check the bulb and connections.
- Do not attempt to disassemble or modify the lamp, as this may result in electric shock or damage to the product.
FUNCTIONAL CHARACTERISTICS
Product for indoor use. Energy efficient light sources can be used in this product. Product equipped with electrical connector.
USAGE GUIDELINES / MAINTENANCE
Any maintenance work must be done when the product is disconnected from power supply. Clean only with soft and dry cloths. Do not use chemical detergents. Do not cover the product. Product may heat up to a higher temperature. Adjustment of lighting direction and/or replacement of the light source must be done when the product has cooled down. Replacement of light source to be performed after the product cools down: see pictures. Product can only be supplied by rated voltage or voltage within the range provided. Light sources with parameters provided in the manual must be used in the product. If the cord isolation or casing is damaged, the product cannot be used. Product must not be used in unfavourable conditions, e.g. dust, water, moisture, vibrations, explosive air atmosphere, fumes, or chemical fumes, etc.
EXPLANATIONS OF SYMBOLS USED
P1 : Rated voltage, frequency.
P2 : Maximum power.
P3 : Base/holder.
P4 : Class II. A product in which protection against electric shock is
provided not only through basic insulation, but also double or reinforced
insulation.
P5 : Protection against solid foreign objects bigger than 12mm provided.
P6 : Product meets the requirements of EU directives.
P7 : Use only indoors.
P8 : The symbol describes the minimal distance of a light fixture (its
light source) from the spots and objects that it’s illuminating.
P9 : Certificate of Conformity confirming the quality of production in
accordance with approved standards on the territory of the Customs Union.
P10 : LED lamp.
P11: The product is compliant with all relevant United Kingdom
regulations.
P12 : The product meets the requirements of technical regulations
applicable in Ukraine.
ENVIRONMENTAL PROTECTION
Keep your environment clean. Segregation of post-packaging waste is
recommended. P13: This labelling indicates the requirement to selectively
collect waste electronic and electrical equipment. Products labelled in this
way must not be disposed of in the same way as other waste under the threat of
a fine. These products may be harmful to the natural environment and health,
and require a special form of recycling/ neutralising. Information on
collection centres is provided by local authorities or sellers of such goods.
Used items can also be returned to the seller when new product is purchased,
in quantity no larger than the purchased item of the same type.
COMMENTS/GUIDELINES
Failure to follow these instructions may result in e.g. fire, burns,
electrical shock, physical injury and other material and non-material damage.
For more information about Kanlux products visit
www.kanlux.com. Kanlux SA shall not be
responsible for any damage resulting from the failure to follow these
instructions. Kanlux SA reserves the right to make changes in the manual – the
current version can be downloaded at
www.kanlux.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>