HUANUO HNTT-B Adjustable TV Tray Table Instruction Manual
- June 14, 2024
- HUANUO
Table of Contents
- HUANUO HNTT-B Adjustable TV Tray Table
- Contents
- Step 1 Secure the Tray Leg Assembly to the Tray
- Step 2 Adjust the Tilt Angle of the Tray
- Step 3 Adjust the Height of the Tray Legs
- Step 4 Secure the Fixing Rod to the Tray Legs
- Step 5 Fold for Easy Storage
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
HUANUO HNTT-B Adjustable TV Tray Table
(US/CA) 1-800-556-0533
(UK) 44-808-196-3874
www.huanuoav.com
[email protected]
[email protected]
CAUTION
The TV tray is not designed for anyone to stand on, sit on, or change babies
on, etc. The manufacturer shall not be responsible for any injuries caused by
using the TV tray for these purposes.
Contents
Step 1 Secure the Tray Leg Assembly to the Tray
Secure the tray legs [B] to the connector [C], then secure the solid rod [D] to the connector [C]. Make sure both of the tray legs are at the same height.
Attach the tray leg assembly to the hooks on the bottom of the tray [A].
Step 2 Adjust the Tilt Angle of the Tray
Note: There are three angle levels to be adjusted.
Snap the solid rod [D] into the hooks of the tray.
Step 3 Adjust the Height of the Tray Legs
Pinch the both buttons on the tray legs [B], then adjust the legs to the desired height. Ensure the two legs are at the same height.
Step 4 Secure the Fixing Rod to the Tray Legs
Loosen the pre-assembled bolts [S] on the fixing rod [E]. Attach the fixing rod [E] to the tray legs [B]. Secure them with the bolts [S] to make the TV tray legs more stable.
Step 5 Fold for Easy Storage
Unscrew the bolts to disassemble the fixing rod [E] before folding the TV tray. Pinch the both buttons on the tray legs [B], then rotate the legs as shown for easy storage.