LIVING CULTURE Pacific Motorised Freestanding Louvre Roof Installation Guide

Table of Contents

Motorized Freestanding Louvre Roof
Includes LED lights, control rod, gutter system, post covers, PVC drainage pipe, and more
Comes with remote control for easy operation
24V RGB colorful LED lights for added ambiance

Tips: Please prepare the preceding installation tools by yourself.

STEP 1 : Assemble 1234 with base 17 plate

STEP 2 : Connect the gutter(has junction 57 with 1234

STEP 3: Install the remaining gutters 68

STEP 4: Assemble the ceiling fan beam (if there is no ceiling fan beam on the design then before this step

STEP 5: Install 24V RGB perimeter LED lights 34

STEP 6: Do silicone sealant at the gaps

STEP 7 : Settle blades

How to settle blades

Install the blade with LED light

Install driven blade

STEP 8: Install the control rod

STEP 9 : Fix to the concrete

Settle electric cables

Settle all cables in the gutter tidily, and cross into the given post (there is a groove that can hide the wires)
Connect the cable from the given post to the control box.

STEP 11: Remote control +Tuya APP wireless remote)

How to match a remote with a system
when you use a new remote, you should match the remote with a motor fist

Extra a new remote (when you match a new remote to pergola)

Press”U2″ on the back of the remote, until the indicator light is blinking
Press the stop button, until the indicator light shuts down then light normally without blinking

When the remote does an opposite order

Press the “U2” button on the back of the remote, until the indicator light blinking speed up
Press the open button until the indicator light blinks speed down and”the “2” button on the back release your hand when it shuts down 1 second
Press the open button on the remote again until the indicator light shuts down for 1 second then release your hand

How to remove a matched remote

Press the “U2” button on the back of the remote until the indicator light of the control board blinks speeds up then release your hand
Press the open button until the indicator light of the control board blinks speed down to shut down then release your hand
Press the close button until the indicator light of the control board blinks from fast to shut down 1 second then release your hand to reset your control board
Press the learn button 4 times continuously, when you press it on the fifth until the indicator light shuts down then release your hand
remarks: all storage date is removed, and reset to a new one . when you reset the zip screen motor, the motor will have a reaction, then please wait until the reaction is finished

How to connect to tuya APP

Q: How do I settle the blades properly?
- A: Follow the instructions provided in the manual to correctly install and secure the blades.
Q: How do I adjust the pergola for optimal positioning?
- A: Double-check and adjust the diagonal size and vertical alignment of the pergola according to the instructions provided.