MEAN WELL GST25E Series 25W AC-DC Reliable Green Industrial Adaptor Owner’s Manual

MEAN WELL GST25E Series 25W AC-DC Reliable Green Industrial Adaptor

Product Information

Specifications:

• Model: GST25E series
• Power: 25W
• Input: Universal AC input / Full range
• Output Voltage: 5V, 7.5V, 9V, 12V, 15V, 18V, 24V, 28V, 48V
• Rated Current: 4.0A, 2.93A, 2.55A, 2.08A, 1.66A, 1.38A, 1.04A, 0.89A, 0.52A
• No Load Power Consumption: < 0.075W
• Energy Efficiency: Level VI
• Protections: Short circuit / Overload / Over voltage
• Working Temperature: -30°C to +70°C
• Enclosure: Fully enclosed plastic case
• Warranty: 3 years

Description:

The GST25E series is a reliable green industrial adaptor with a power rating of 25W. It features a universal AC input with a full range and is suitable for various applications such as consumer electronic devices, telecommunication devices, office facilities, and industrial equipment. The adaptor has a no- load power consumption of less than 0.075W and complies with EU ErP and CoC Version 5 energy efficiency standards. It also comes with protection against short circuits, overload, and overvoltage.

Model Encoding:

The model encoding of the GST25E series is as follows: GST 25 E 05 – P1J. The “P1J” indicates the standard model with a 2.1×5.5x11mm, C+ tuning fork type DC plug. Other options are available upon customer request.

Accessories:

The GST25E series comes with various DC plug quick adapter accessories, which are sold separately. Please refer to the DC plug kit for more information.

Product Usage Instructions

Installation:

1. Ensure that the input voltage matches the specifications of the GST25E series adaptor.
2. Connect the adaptor to the power source using the 2 pole EURO plug.
3. Connect the DC plug to the device you want to power.

Operation:

Once the installation is complete, the LED indicator on the adaptor will indicate that it is receiving power.

Maintenance:

There is no specific maintenance required for the GST25E series adaptor. However, it is recommended to periodically check for any signs of damage or wear and replace the adaptor if necessary.

FAQ

• Q: What is the warranty period for the GST25E series adaptor?
  A: The GST25E series adaptor comes with a 3-year warranty.

• Q: Can I use the adaptor with devices that require different output voltages?
  A: No, the GST25E series adaptor has specific output voltage options (5V, 7.5V, 9V, 12V, 15V, 18V, 24V, 28V, 48V) and should be used with devices that match the supported voltages.

Features

• Global certificates
• Universal AC input / Full range
• 2 pole EURO plug, Class I power unit
• No load power consumption< 0.075W
• Energy efficiency Level VI
• Comply with EU ErP and CoC Version 5
• Protections: Short circuit / Overload / Over voltage
• Fully enclosed plastic case
• Pass LPS
• -30~+70°C wide range working temperature
• LED indicator for power on
• Various DC plug quick adapter accessories available (Plug kit sold separately, please refer to: https://www.meanwell.com/upload/pdf/DC-plug.pdf)
• 3 years warranty

Applications

• Consumer electronic devices
• Telecommunication devices
• Office facilities
• Industrial equipments
• GTIN CODE

MW Search : https://www.meanwell.com/serviceGTIN.aspx

Description

GST25E is a highly reliable, 25W wall-mounted style single-output green adaptor series. This product is a class II power unit (no FG), equipped with a 2-Pin standard European AC power plug, adopting the input range from 85VAC to 264VAC. The entire series supplies different models with output voltages ranging between 5VDC and 48VDC that can satisfy the demands for various types of consumer electronic devices.
With the efficiency up to 89% and the extremely low no-load power consumption below 0.075W, GST25E is compliant with EU ErP, and Code of Conduct(CoC) Version 5 . The supreme feature allows the adaptor to save energy when it is either under the operating mode or the standby mode. The entire series utilizes the 94V-0 flame retardant plastic case, providing the double insulation that effectively prevents electrical shock.GST25E is certified for international safety regulations.

Model Encoding

SPECIFICATION

ORDER NO.| GST25E05-P1J| GST25E07-P1J| GST25E09-P1J| GST25E12-P1J| GST25E15-P1J| GST25E18-P1J| GST25E24-P1J| GST25E28-P1J| GST25E48-P1J
---|---|---|---|---|---|---|---|---|---

OUTPUT

| SAFETY MODEL NO.| GST25E05| GST25E07| GST25E09| GST25E12| GST25E15| GST25E18| GST25E24| GST25E28| GST25E48
DC VOLTAGE Note.2| 5V| 7.5V| 9V| 12V| 15V| 18V| 24V| 28V| 48V
RATED CURRENT| 4.0A| 2.93A| 2.55A| 2.08A| 1.66A| 1.38A| 1.04A| 0.89A| 0.52A
CURRENT RANGE| 0 ~ 4.0A| 0 ~ 2.93A| 0 ~ 2.55A| 0 ~ 2.08A| 0 ~ 1.66A| 0 ~ 1.38A| 0 ~ 1.04A| 0 ~ 0.89A| 0 ~ 0.52A
RATED POWER (max.)| 20W| 22W| 23W| 25W| 25W| 25W| 25W| 25W| 25W
RIPPLE & NOISE (max.) **Note.3| 80mVp-p| 80mVp-p| 80mVp-p| 80mVp-p| 100mVp-p| 100mVp-p| 150mVp-p| 150mVp-p| 150mVp-p
VOLTAGE TOLERANCE Note.4| ±5.0%| ±5.0%| ±5.0%| ±3.0%| ±3.0%| ±3.0%| ±2.0%| ±2.0%| ±2.0%
LINE REGULATION Note.5| ±1.0%| ±1.0%| ±1.0%| ±1.0%| ±1.0%| ±1.0%| ±1.0%| ±1.0%| ±1.0%
LOAD REGULATION Note.6| ±5.0%| ±5.0%| ±5.0%| ±3.0%| ±3.0%| ±3.0%| ±2.0%| ±2.0%| ±2.0%
SETUP, RISE, HOLD UP TIME**| 1000ms, 30ms, 50ms/230VAC           1500ms, 30ms, 15ms/115VAC at full load

INPUT

| VOLTAGE RANGE Note.7| 85 ~ 264VAC
FREQUENCY RANGE| 47 ~ 63Hz
EFFICIENCY (Typ.)| 81.5%| 84.5%| 85%| 86.5%| 87%| 87%| 88%| 88%| 89%
AC CURRENT| 0.6A / 115VAC          0.35A / 230VAC
INRUSH CURRENT (max.)| Cold start   35A / 115VAC           65A / 230VAC
LEAKAGE CURRENT(max.)| 0.25mA / 240VAC

PROTECTION

| ****

OVERLOAD

| 110 ~ 150% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed

OVER VOLTAGE

| 110 ~ 140% rated output voltage
Protection type : Clamp by zener diode

ENVIRONMENT

| WORKING TEMP.| -30 ~ +70℃ (Refer to “Derating Curve”)
WORKING HUMIDITY| 20% ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY| -40 ~ +85℃, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT| ±0.03% / ℃ (0 ~ 50℃)
VIBRATION| 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC

(Note. 9)

| SAFETY STANDARDS Note. 8| TUV EN62368-1, EAC TP TC 004 approved; SIRIM MS IEC60950-1 (optional) approved
WITHSTAND VOLTAGE| I/P-O/P:4242VDC
ISOLATION RESISTANCE| I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH

EMC EMISSION

| Parameter| Standard| Test Level / Note
Conducted emission| EN55032(CISPR32), EAC TP TC 020| Class B
Radiated emission| EN55032(CISPR32), EAC TP TC 020| Class B
Harmonic current| EN61000-3-2| Class A
Voltage flicker| EN61000-3-3| ——-

EMC IMMUNITY

| BS EN/EN55035
Parameter| Standard| Test Level /Note
ESD| EN61000-4-2| Level 3, 8KV air; Level 2, 4KV contact
RF field susceptibility| EN61000-4-3| Level 2, 3V/m
EFT bursts| EN61000-4-4| Level 2, 1KV
Surge susceptibility| EN61000-4-5| Level 3, 1KV/Line-Line
Conducted susceptibility| EN61000-4-6| Level 2, 3V
Magnetic field immunity| EN61000-4-8| Level 2, 3A/m
Voltage dips , interruption| EN61000-4-11| ＞95% dip 0.5 periods, 30% dip 25 periods,

＞95% interruptions 250 periods

OTHERS

| MTBF| 3879.7K hrs min.       Telcordia SR-332 (Bellcore) ; 674.6K hrs min.       MIL-HDBK-217F (25℃)
DIMENSION| 795433mm (LWH)
PACKING| 202.5g; 60pcs/13.2Kg/1.15CUFT

CONNECTOR

| PLUG| See page 4~5 ; Other type available by customer requested
CABLE| See page 4~5 ; Other type available by customer requested

NOTE

| 1.All parameters are specified at 230VAC input, rated load, 25℃ 70% RH ambient. 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load.

3.Ripple & noise are measured at 20MHz by using a 12″ twisted pair terminated with a 0.1μf & 47μf capacitor. 4.Tolerance: includes set up tolerance, line regulation, load regulation.

5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 10% to 100% rated load.

7. Derating may be needed under low input voltage. Please check the derating curve for more details.

8. The demand for Malaysia safety is processed with the order no. GST25E -SIRIM by request. Please contact MEAN WELL for details.

9. The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”

(as available on http://www.meanwell.com)

※ Product Liability Disclaimer：For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx

Derating Curve

Static Characteristics

Mechanical Specification

DC output plug

Standard plug : P1J

DC plug changeable through:

1. Customization of the standard part with an optional DC plug according to the table (MOQ applicable)
2. Quick adapter accessory (sold separately without MOQ)]

Please refer to below table and online selection guide below: https://www.meanwell.com/upload/pdf/DC_plug.pdf

Example quick adapter accessory:

Optional DC plug: (Available in customized cable or quick adapter)

Installation Manual
Please referto : http://www.meanwell.com/manual.html

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>