Taylor 7558 Digital Scale Instruction Manual
- June 14, 2024
- TAYLOR
Table of Contents
Taylor 7558 Digital Scale
INSTRUCTIONS FOR USE & WARRANTY INFORMATION
CUSTOMER SERVICE INFORMATION
- PLEASE READ!
- For questions regarding this product, please contact us at:
- TAYLOR, division of Lifetime Brands, Inc.
- 2220 Entrada Del Sol, Suite A | Las Cruces, New Mexico 88001 USA
- 1-866-843-3905
- www.taylorusa.com
- Email: [email protected]
- We value your thoughts on our product and services.
- Please post an on-line review to help us continue to meet your needs and expectations.
- Please contact us before returning to retailer.
When Initially Setting Up Your Scale
- Place your scale on a hard, flat surface, do not use on uneven tile, flooring or carpeting. Try to keep your scale in the same location or position as much as possible.
- Step on the scale with one foot applying enough pressure to turn the scale on – then remove your foot.
- The digital readout should show dashes or zeros.
- The scale will automatically turn off.
- Now your scale is ready for you to take a weight reading. Step on the scale evenly with both feet.
- If you pick up, move or bump your scale, please repeat the steps above for best accuracy.
- Party issuing Supplier’s Declaration of Conformity 8
Responsible party – U.S. Contact information:
- Taylor, division of Lifetime Brands, Inc.
- 2311 W. 22nd Street, Suite 200
Equipment
- Product Name: Digital Scale
- Model No.: 7558
- Trade Name: Taylor
- Oak Brook, IL 60523
le declare under our sole responsibility that the above referenced product has been tested according to FCC uirements and this device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: this device may not cause harmful interference, and (21 this device must accept any interterence received, including Interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digita. device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not oocur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Five (5) Year Limited Warranty
This scale is warranted against defects in materials of workmanship (excluding batteries) for five (5) years for the original purchaser from date of retail purchase. It does not cover damages or wear resulting from accident, misuse, abuse, commercial use, or unauthorized adjustment and/or repair. Do not return to retailer. For product support 8 warranty information: Please contact us with proof of purchase (purchase receipt) at:
TAYLOR
- 2220 Entrada Del Sol, Suite A Las Cruces, New Mexico 88001 USA
- Phone: 1-866-843-3905
- Email: [email protected]
There are no express warranties except as listed above. This warranty gives you specific legal rights, and you may have other rights which vary from state to state.
For additional product information, or warranty information outside the USA, please contact us through www.taylorusa.com.
- ©2022 Taylor, a division of Lifetime Brands, Inc. All rights reserved. Oak Brook, IL, 60523
- Made to our exact specifications in China.
- Not legal for trade.
- CP7558 9.22 WC/
REF# 7558xxx/5271513/5252783/5252791
Frequently Asked Questions
How should I set up my Taylor 7558 Digital Scale for initial use?
Place the scale on a hard, flat surface. Avoid using it on uneven tile, flooring, or carpeting. Step on the scale with one foot, applying enough pressure to turn it on, and then remove your foot. The digital readout should display dashes or zeros. The scale will automatically turn off. Now, it's ready for you to take a weight reading by stepping on it evenly with both feet.
What should I do if I pick up, move, or accidentally bump my scale?
If you pick up, move, or bump your scale, it's recommended to repeat the initial setup steps mentioned above for the best accuracy.
What is the warranty coverage for the Taylor 7558 Digital Scale?
The Taylor 7558 Digital Scale is warranted against defects in materials and workmanship (excluding batteries) for five (5) years for the original purchaser from the date of retail purchase. This warranty does not cover damages or wear resulting from accident, misuse, abuse, commercial use, or unauthorized adjustment and/or repair. For warranty support, please contact Taylor with proof of purchase (purchase receipt) at the provided address and contact information.
Can I return the scale to the retailer for warranty issues?
The warranty information states not to return the scale to the retailer for warranty issues. Instead, you should contact Taylor directly for product support and warranty information.
Are there any specific instructions for FCC compliance related to the scale?
The scale complies with FCC Part 15 rules, and operation is subject to certain conditions outlined in the provided information. Users should avoid making changes or modifications not expressly approved by the party responsible for compliance, as it could void the user's authority to operate the equipment. Additionally, users are encouraged to follow measures to address any harmful interference that may occur.
Is the Taylor 7558 Digital Scale legal for trade use?
No, the Taylor 7558 Digital Scale is not legal for trade use.
Where can I find additional product information or warranty information outside the USA?
For additional product information or warranty information outside the USA, you can contact Taylor through their website.
Are there any express warranties provided for the scale aside from the five (5) year limited warranty?
There are no express warranties provided for the scale aside from the five (5) year limited warranty mentioned in the provided information. This warranty gives you specific legal rights, and you may have other rights that vary from state to state.
Can I use the Taylor 7558 Digital Scale on carpeted surfaces?
It is not recommended to use the scale on carpeted surfaces. For accurate measurements, it's best to place the scale on a hard, flat surface.
How do I interpret the display when it shows dashes or zeros during the initial setup?
When the display shows dashes or zeros after stepping on the scale with one foot, it indicates that the scale has powered on and is ready for use. You can then step on it evenly with both feet to take a weight reading.
Can I use the Taylor 7558 Digital Scale for commercial purposes?
No, this scale is not intended for commercial use. It is designed for personal use only.
What do I do if I need a replacement or have questions about warranty coverage?
If you require a replacement or have questions about warranty coverage, please contact Taylor customer service using the provided contact information in the instructions. Be sure to have proof of purchase (purchase receipt) ready when you reach out for warranty support.
Download The Pdf Link:Taylor 7558 Digital Scale Instruction Manual