Whirlpool YWED97HEDW Electronic Dryer User Guide

: June 4, 2024
: Whirlpool

Table of Contents

YWED97HEDW Electronic Dryer
Dryer Safety
Accessories
Check Your Vent System for Good Airflow
Control panel and features
Cycle Guide – Automatic Cycles
Using Your Dryer
Cycle Status Indicators
Additional Features
Dryer Care
Troubleshooting
Documents / Resources

YWED97HEDW Electronic Dryer
**User Guide
W10804688A
W10804689A – SP

**

YWED97HEDW Electronic Dryer

If you have any problems or questions, visit us at www.whirlpool.com

Dryer Safety

Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
** This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or ‘WARNING.” These words mean:
DANGER
WARNING
You can be killed or seriously injured if you don’t immediately follow instructions.
You can be killed or seriously injured if you don’t follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
WARNING – “Risk of Fire”**

Clothes dryer installation must be performed by a qualified installer.
Install the clothes dryer according to the manufacturer’s instructions and local codes.
Do not install a clothes dryer with flexible plastic venting materials or flexible metal (foil type) duct If a flexible metal duct is installed, it must be of a specific type identified by the appliance manufacturer as suitable for use with clothes dryers. Flexible venting materials are known to collapse, be easily crushed, and trap lint. These conditions will obstruct clothes dryer airflow and increase the risk of fire.
To reduce the risk of severe injury or death, follow all installation instructions.
Save these instructions.

State of California Proposition 65 Warnings:
WARNING : This product contains one or more chemicals known to the State of California to cause cancer.
WARNING : This product contains one or more chemicals known to the State of California to cause birth defects or other reproductive harm.

In the State of Massachusetts, the following installation instructions apply:

Installations and repairs must be performed by a qualified or licensed contractor, plumber, or gasfitter qualified or licensed by the State of Massachusetts.
If using a ball valve, it shall be a T-handle type.
A flexible gas connector, when used, must not exceed 3 feet.

WARNING : For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, or to prevent property damage, personal injury, or death.

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
WHAT TO DO IF YOU SMELL GAS:
• Do not try to light any appliance.
• Do not touch any electrical switch; do not use any phone in your building.
• Clear the room, building, or area of all occupants.
• Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.
• If you cannot reach your gas supplier, call the fire department
Installation and service must be performed by a qualified installer, service agency, or gas supplier.

WARNING : Gas leaks cannot always be detected by smell. Gas suppliers recommend that you use a gas detector approved by UL or CSA. For more information, contact your gas supplier. If a gas leak is detected, follow the “What to do if you smell gas” instructions.
IMPORTANT : The gas installation must conform with local codes, or in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1/NFPA 54. The dryer must be electrically grounded in accordance with local codes, or in the absence of local codes, with the National Electrical Code. ANSUNFPA 70.
IMPORTANT : When discarding or storing your old clothes dryer, remove the door.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the dryer, follow basic precautions, including the following:

Read all instructions before using the dryer.
Do not place items exposed to cooking oils in your dryer. Items contaminated with cooking oils may contribute to a chemical reaction that could cause a load to catch fire.
Do not dry articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, or other flammable or explosive substances as they give off vapors that could ignite or explode.
Do not allow children to play on or in the dryer. Close supervision of children is necessary when the dryer is used near children.
Before the dryer is removed from service or discarded, remove the door to the drying compartment.
Do not reach into the dryer if the drum is moving.
Do not install or store the dryer where it will be exposed to the weather.
Do not tamper with controls.
Do not repair or replace any part of the dryer or attempt any servicing unless specifically recommended in this Use and Care Guide or in published user-repair instructions that you understand and have the skills to carry out.
Do not use fabric softeners or products to eliminate static unless recommended by the manufacturer of the fabric softener or product.
Do not use heat to dry articles containing foam rubber or similarly textured rubber-like materials.
Clean the lint screen before or after each load.
Keep the area around the exhaust opening and adjacent surrounding areas free from the accumulation of lint, dust, and dirt.
The interior of the dryer and exhaust vent should be cleaned periodically by qualified service personnel.
See “Electrical Requirements’ located in the installation instructions for grounding instructions.

SAVE THESE INSTRUCTIONS

Accessories

Enhance your new washer and dryer with the following genuine Whirlpool accessories. For more information on options and ordering, call 1-800-901-2042, or visit us at: www.whirlpool.com/accessories. In Canada, call 1-800-807-6777 or visit us at www.whirlpoolparts.ca

15″ Pedestal
Color-matched pedestals raise the washer and dryer to a more comfortable working height. The large drawer provides convenient storage.

Stack Kit
If space is at a premium, the stack kit allows the dryer to be installed on top of the washer.
Drying Rack
The Drying Rack provides a stationary drying surface for items such as sweaters and tennis shoes.
See the “Additional Features” section for more information.

Check Your Vent System for Good Airflow

WARNING

Fire Hazard
Use a heavy metal vent.
Do not use a plastic vent.
Do not use a metal foil vent. Failure to follow these instructions can result in death or tire.
Good airflow
Along with the heat, dryers require good airflow to efficiently dry laundry. Proper venting will reduce your drying times and improve your energy savings. See Installation Instructions. The venting system attached to the dryer plays a big role in good airflow. Service calls caused by improper venting are not covered by the warranty and will be paid for by the customer. regardless of who installed the dryer.
Maintain good airflow by:

Cleaning your lint screen before each load.
Replace plastic or foil vent material with 4′ (102 mm) diameter heavy, rigid vent material.
Use the shortest length of vent possible.
Use no more than four 90° elbows in a vent system; each bend and curve reduces airflow.
Remove lint and debris from the exhaust hood
Remove lint from the entire length of the vent system at least every 2 years. When cleaning is complete, be sure to follow the Installation Instructions supplied with your dryer for the final product check.
Clear away items from the front of the dryer.

Use Automatic Cycles for better fabric care and energy savings

Use the Automatic Cycles to provide the most energy savings and enhanced fabric care from the dryer. During Automatic Cycles, drying air temperature and moisture level are sensed in the load. This sensing occurs throughout the drying cycle and the dryer shuts off when the load reaches the selected dryness. Use the NORMAL dryness level to provide optimal energy savings. With Timed Dry, the dryer runs the amount of time set and sometimes results in shrinkage, wrinkling, and static due to over-drying. Use limed Dry for the occasional damp load that needs a little more drying time or when using the drying rack.
Tips for getting the best performance from your steam dryer (on some models)

Results may vary depending on the fabric. 100% cotton garments with wrinkle-free finish may yield better results than those without. 100% cotton items may require additional touching up after cycles that use steam.
The use of fabric softener sheets is not recommended with cycles that use steam. It may cause temporary staining on clothes.
Cycles that use steam are not recommended for items that have been starched. Wash any starched or new garments prior to using a cycle that uses steam.
The Steam Refresh Cycle is best for smoothing out wrinkles and reducing odors from loads consisting of dry items of wrinkle-free cotton, cotton-polyester blend, common knits, and synthetics.

Control panel and features

Not all features and cycles are available on all models.
NOTE : The control panel features a sensitive surface that responds to a light touch of your finger. To ensure your selections are registered, touch the control panel with your fingertip, not your fingernail. When selecting a setting or option, simply touch its name.

Whirlpool YWED97HEDW Electronic Dryer - Control panel and
features2

POWER
Touch to turn the dryer on and off. Touch to stop/cancel a cycle at any time.
CYCLE CONTROL KNOB
Turn the knob to select a cycle for your laundry load.
Automatic Cycles are Heavy Duty, Normal, Bulky, Casual (on some models), Delicates, Towels (on some models), and Sanitize (on some models). Manual Cycles are Quick Dry and Timed Dry. The Steam Cycle (on some models) is Steam Refresh. See “Cycle Guide” for detailed descriptions of cycles.
START/PAUSE
Touch and hold until the LED comes on to start a cycle, or touch once while a cycle is in the process to pause it.
LED DISPLAY AND SETTINGS
When you select a cycle, its settings will light up and the estimated time remaining (for Automatic Cycles) or actual time remaining (for Manual Cycles) will be displayed. On
2-digit displays, for times longer than 99 minutes, hours will be displayed followed by minutes. See “Cycle Guide” for available settings on each cycle. Not all settings are available with all cycles.
Cycle Status Lights
The indicators at the top of the display will let you know what stage of the drying cycle is in process.
For more information on each stage, see “Cycle Status Indicators.”
–/+ (Adjust Drying Time)
Touch “+” or “–” with Manual Cycles to increase or decrease the length of a Timed Dry or Quick Dry cycle.
Temp
When using Manual Cycles or Steam Refresh, you may select a dry temperature based on the type of load you are drying. Use the warmest setting safe for the garments in the load. Follow garment label instructions.
NOTE: Automatic Cycles use a preset temperature that is not adjustable.
Dryness Level
When using Automatic Cycles (except for the Sanitize cycle), you may select a Dryness Level based on the type of load you are drying.
NOTE: Dryness Level is for use with Automatic Cycles only.
Damp Dry Signal (on some models)
Touch to select the Damp Dry Signal. When selected, a series of beeps will sound when the load is damp, but not completely dry. This will allow you to take clothes out of the load that do not need to dry completely.
This option is available on Heavy Duty, Normal, Bulky, Casual, Delicates, and Towels cycles. The Damp Dry Signal is selected as a default for the Bulky cycle, as a reminder to manually reposition bulky loads midway through the cycle.
Wrinkle Shield ™ Option
If you will be unable to remove a load immediately, touch Wrinkle Shield to add up to 140 minutes of periodic tumbling to help reduce wrinkling. You may
select the “With Steam” setting (on some models) to add a short steam cycle after 60 minutes to help smooth out wrinkles.
OPTIONS
Use to select available options for your dryer. Not all cycles and options are available on all models.
A Static Reduce
Touch to add the Static Reduce option to selected Automatic cycles (see the “Cycle Guide”). The dryer will automatically tumble, pause, and introduce a small amount of moisture into the load to help reduce static.
This option adds approximately 8 minutes to the total cycle time.
B Steam
Touch to activate the Steam option, which adds steam to the end of the Heavy Duty, Towels, Normal, or Bulky cycle to help smooth out wrinkles. The Steam option can be used with High or Medium heat settings.
C EcoBoost ™ Option
Touch to activate the EcoBoost ™ option, which allows you to increase your energy savings by using a slightly lower heat level. The EcoBoost ™ option will increase
drying times by approximately 40 minutes; the LED Display will reflect this time. The EcoBoost ™ option is only available for Normal. For optimal energy turn on the EcoBoost ™ option.
For optimal time turn off the EcoBoost ™ option.
NOTE : Energy savings may vary across loads.
D Drum Light
Touch to turn the LED drum light on or off. The light will also turn on when the door is open, and turn off automatically after about 5 minutes.
E Cycle Signal
Use this to turn the signal indicating the end of a drying cycle on or off.
NOTE : You may also turn off the tones that sound when a feature, setting, or option is touched. Touch and hold Cycle Signal for about one second to turn sounds on or off.
E Control Lock
Use to lock the controls of the dryer and avoid an accidental change in cycle options or preferences during a drying cycle.
Touch and hold CONTROL LOCK for 3 seconds to lock or unlock the controls of the dryer. During this time, the LED Display will count down 3-2-1. Once the controls are locked, the LED Display will display “Lc” or “Loc.”
NOTE : The Control Lock function may be enabled when recovering from a power failure. To unlock the control, touch and hold the CONTROL LOCK for at least 3 seconds.

Cycle Guide – Automatic Cycles

Settings and options shown in bold are default settings for that cycle.
If settings are changed, the new settings will be remembered. If there is a power failure, settings will return to default.
Not all features and cycles are available on all models.
Not all settings and options are available on each cycle.
Use Automatic Cycles for better fabric care and energy savings
The dryer senses moisture in the load or air temperature and shuts off when the load reaches the selected dryness level.
Use the NORMAL dryness level to provide optimal energy savings.

Items to dry:| Cycle:| Drying Temperature:| Dryness Level:| Default Time:| Available Options:| Cycle Details:
---|---|---|---|---|---|---
Work clothes, casual wear, mixed cottons, sheets, corduroys| Normal| Medium| More Normal Less| 78| Damp Dry Signal Wrinkle Shield™† Static Reduce EcoBoost ™ Steam| **Uses Medium heat to dry large loads of mixed fabrics and items. Normal is the preferred energy cycle.
Jackets, comforters, pillows| Bulky| Medium| More Normal Less| 55| Damp Dry Signal**

Wrinkle Shield™† Static Reduce Steam

| **Use for drying large, bulky items; do not overfill the dryer drum. Partway through the cycle, the signal will sound to indicate when it is time to rearrange items for optimal drying.
Heavyweight items such as towels or heavy work clothes| Heavy Duty| High| More Normal Less| 45| Damp Dry Signal Wrinkle Shield™† Static Reduce Steam| **Offers stepped drying starting with High heat followed by Medium heat for enhanced fabric care and energy savings.
Large loads of cotton towels, heavyweight items| Towels| High| More Normal Less| 1:00

or 60

or 70

| Wrinkle Shield™†| **This is a long cycle with high heat, which has been proven to reduce household bacteria. This cycle is not recommended for all fabrics. Use for large loads of heavyweight fabrics.
Undergarments, blouses, lingerie, performance wear| Delicates| Extra Low| More Normal Less| 28| Damp Dry Signal Wrinkle Shield™† Static Reduce*| **Uses Extra Low heat to gently dry delicate items.
Shirts, blouses, permanent press, synthetics, lightweight items| Casual| Low| More Normal Less| 35| Damp Dry Signal Wrinkle Shield ™† ** Static Reduce*| **Uses a stepped drying temperature from Medium to Low for improved moisture removal and enhanced fabric care.

† On some models, you may select the “With Steam” setting to add a short steam cycle after 60 minutes. This is available only with High and Medium Drying Temperature settings.

On steam models only.

Load Size Recommendations
For best results, follow the wet load size recommendations noted for each cycle.
Small load: Fill the dryer drum with 3–4 items, not more than 1/4 full.
Medium load: Fill the dryer drum up to about 1/2 full.
Large load: Fill the dryer drum up to about 3/4 full.
Do not pack tightly. Items need to tumble freely.

Settings and options shown in bold are default settings for that cycle.
If settings are changed, the new settings will be remembered (except on Quick Dry). If there is a power failure, settings will return to default.
Not all features and cycles are available on all models.
Not all settings and options are available on each cycle.

Adjusting drying time on Timed Cycles
When you select a Timed Cycle, the time appears in the display. Use + and – to increase or decrease the time in 1-minute increments.
Touch and hold to change the time in 5-minute increments.
The maximum dry time is 100 minutes.

Selecting the Drying Temperature
A High heat setting may be used for drying heavyweight items such as towels and work clothes.
A Low to Medium heat setting may be used for drying medium-weight items such as sheets, blouses, dresses, underwear, permanent press fabrics, and some knits.
Use a no heat (air only) setting for foam, rubber, plastic, or heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE : If you have questions about drying temperatures for various loads, refer to the care label directions.

Items to dry:| Cycle:| Drying Temperature:| Default Time:| Available Options:| Cycle Details:
---|---|---|---|---|---
Small loads and sportswear| Quick Dry| High Medium Low

Extra Low Air Only

| 13| Wrinkle Shield™†| ****For small loads of 3–4 items.
Any load

NOTE: Select Air Only to dry foam, rubber, plastic, or heat-sensitive fabrics.

| Timed Dry| High Medium Low

Extra Low Air Only

| 40| Wrinkle Shield™†| ****Use to dry items to a damp level for items that do not require an entire drying cycle. Select a drying temperature based on the type of fabrics in your load. If you are unsure of the temperature to select for a load, select the lower setting rather than the higher setting.

† On some models, you may select the “With Steam” setting to add a short steam cycle after 60 minutes. This is available only with High and Medium Drying Temperature settings.

Cycle Guide – Steam Cycle (steam models only)

Settings and options shown in bold are default settings for that cycle.
Not all settings and options are available on each cycle.
Steam cycles are designed for use with dry loads to loosen wrinkles, reduce odors, and refresh fabrics.

Items to refresh:|

Cycle:

| Drying Temperature:| Default Time:| Available Options:| Cycle Details:
---|---|---|---|---|---
Shirts, blouses, and slacks| Steam Refresh| High

Medium

| 22| Wrinkle Shield™† Static Reduce*| **** Use to reduce odors and light wrinkles. Do not add dryer sheets.

† You may select the “With Steam” setting to add a short steam cycle after 60 minutes. This is available only with High and Medium Drying Temperature settings.

On steam models only.

Load Size Recommendations
For best results, follow the load size recommendations noted for each cycle.
Small load: Fill the dryer drum with 3–4 items, not more than 1/4 full.

Medium load: Fill the dryer drum up to about 1/2 full.
Large load: Fill the dryer drum up to about 3/4 full.
Do not pack tightly. Items need to tumble freely.

Using Your Dryer

**WARNING**

Explosion Hazard
Keep flammable materials and vapors, such as gasoline, away from the dryer. Do not dry anything that has ever had anything flammable on it (even after washing). Failure to follow these instructions can result in death, explosion, or fire.

WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.

Clean the lint screen

Clean the lint screen before each load. Pull the lint screen straight up. Roll lint off the screen with your fingers. Do not rinse or wash the screen to remove the lint. Wet lint is hard to remove. Push the lint screen firmly back into place.
For additional cleaning information, see “Dryer Care.”
Load the dryer
Appearance may vary.
Open the door by pulling on the handle. Place laundry in the dryer. Add a dryer sheet to the wet load, if desired. Close the door.
IMPORTANT : Do not tightly pack the dryer. Items need to tumble freely. Tightly packing can lead to poor drying performance and may increase wrinkling and tangling.
WARNING
Fire Hazard
**** No washer can completely remove oil. Do not dry anything that has ever had any type of oil on it (including cooking oils). Items containing foam, rubber, or plastic must be dried on a clothesline or by using an Air Cycle.
Failure to follow these instructions can result in death or fire.
Touch POWER
Touch POWER to turn on the dryer.
Select the desired cycle
Select the desired cycle for your load. See the “Cycle Guide” for more information about each cycle. Not all cycles are on all models.
Adjust cycle settings, if desired
Appearance may vary.
You may adjust different settings, depending on whether you have selected an Automatic Cycle, Manual Cycle, or Steam Cycle (on some models). See the “Cycle Guide” for detailed information.
NOTE : Not all options and settings are available with all cycles. Not all cycles are on all models.
Automatic Cycles:
You can select a different dryness level, depending on your load. Touch the DRYNESS LEVEL to scroll to More, Normal, or Less. Selecting More, Normal, or Less automatically adjusts the dryness level at which the dryer will shut off. Once a dryness level is set, it cannot be changed without stopping the cycle.
Automatic Cycles give the best drying in the shortest time.
Drying time varies based on fabric type, load size, and dryness setting. Drying time is estimated and may change throughout the cycle. Drying time can not be changed on
Automatic Cycles.
NOTE : Automatic Cycles use a preset temperature that is not adjustable.
Manual Cycles:
When you select a Manual Cycle, the time appears in the display. Touch + and – to increase or decrease the time in 1-minute increments. Touch and hold to change the
time in 5-minute increments. The temperature may be changed by pressing Temp until the desired dry temperature is lit. Once a cycle has started, the temperature can be changed after first pausing the
cycle. Cycle time is estimated and may change throughout the cycle. Cycle time can not be changed on Steam Cycles.
Steam Cycles (on some models):
Select Steam Refresh to reduce odors and light wrinkles in dry loads. Do not add dryer sheets.
Select any additional options
Appearance may vary.
The display will show the settings for the selected cycle. To adjust a setting, touch its name – Static Reduce, Steam, EcoBoost, Drum Light, Cycle Signal, or Control Lock..
NOTE : Not all options and settings are available with all cycles.
Touch and hold START/PAUSE to begin the cycle
Touch and hold START/PAUSE to begin the cycle.
Remove garments promptly after the cycle is finished
Appearance may vary.
Promptly remove garments after the cycle has completed reducing wrinkling.

Changing the Automatic Cycle settings to increase or decrease drying time

If all your loads on all Automatic Cycles are consistently less dry or drier than you would like, you may change the default settings to increase or decrease the default dryness level.
Your automatic drying settings can be adjusted to adapt to different installations, environmental conditions, or personal preferences. This change is retained and will affect all of your Automatic Cycles, not just the current cycle/load. There are 5 drying settings (setting codes differ depending on model), which are displayed using the time display:
01/F1 Factory preset dryness level.
02/F2 Slightly drier clothes, 15% more drying time.
03/F3 Much drier clothes, 30% more drying time.
04/F4 Slightly wetter clothes, 15% less drying time.
05/F5 Much wetter clothes, 30% less drying time.

To change the drying settings:
NOTE : The settings cannot be changed while the dryer is running or paused. The dryer must be in standby mode (power is off) to adjust the default settings.

Before starting a cycle, touch and hold the DRYNESS LEVEL for 6 seconds.
Touch the DRYNESS LEVEL to select the dryness level shown in the time display: 01/F1, 02/F2, 03/F3, 04/F4, or 05/F5.
Touch START/PAUSE to save the new dryness level setting.

Cycle Status Indicators

Whirlpool YWED97HEDW Electronic Dryer - settings
Appearance may vary.

The Cycle Status Indicators show the progress of a cycle.
Not all indicators are available on all models.
Check Vent
This indicator will show the status of airflow through the dryer and dryer vent system for the dryer’s life. During the sensing phase at the beginning of the cycle, the Check Vent
light will come on if a blocked vent or low airflow issue is detected. This light will stay on for the entire cycle. The light will be cleared when selecting a new cycle, touching
POWER, or opening the door after the cycle has completed.
This feature is available during Automatic and Steam cycles only. For more information on maintaining good airflow, see “Check Your Vent System for Good Airflow.”
NOTE : If there are other error issues during a cycle, the Check Vent indicator will not light up. See the “Troubleshooting” section.

Wet
The load is still wet and/or the cycle just started.
Damp
This indicator shows that the load is partially dried and items that you may wish to hang up or iron while still damp may be removed.
Cool Down
The dryer has finished drying with heat and is now tumbling the load without heat to cool it down and reduce wrinkling.
Done
This will indicate that the selected cycle has ended and the load may be removed from the dryer. If the Wrinkle Shield ™ option has been selected, the dryer may continue to tumble the load, even if the Done indicator is lit.
Sensing
The Sensing indicator will light during Automatic Cycles to indicate that the moisture sensor on the dryer is operating.
This indicator will not light during Manual Cycles or options such as Wrinkle Shield.
Static Reduce
This indicator will light when the Static Reduce function is active.
NOTE : Static Reduce is not available on all cycles.
Steaming
This indicator will light when the Steam function is active.
NOTE : Steam is not available on all cycles.
Wrinkle Shield ™ Option
This indicator will light if the Wrinkle Shield ™ option has been selected and is running. The dryer will periodically tumble the load for up to 140 minutes after the cycle has ended.

Additional Features

USING THE DRYING RACK

To purchase a drying rack for your dryer, order by calling 1-877-944-7566. You will need your model and serial number and the purchase date. Remove and discard any packing material before use.
Use the Drying Rack for items that you do not want to tumble dry, such as sweaters and tennis shoes. When you use the drying rack, the drum continues to turn, but the rack
remains stationary.
The drying rack is intended for use with the Manual Dry/ Timed Dry cycles only. The drying rack cannot be used with Automatic cycles.

To use the drying rack:
IMPORTANT : Do not remove the lint screen.

Open the dryer door.
Align the two hooks on the front of the drying rack with the holes in the dryer door opening and press down fully into the holes. Rest the rear support on the dryer back ledge.
Place wet items on top of the drying rack. Allow space around items for air to circulate. The drying rack does not move, but the drum will rotate; be sure to leave adequate clearance between items and the inside of the dryer drum. Make sure items do not hang over the edges or between the drying rack grille.
Close the door.
Select a Timed Dry/Air Only, or Low-Temperature cycle. Items containing foam, rubber, or plastic must be dried on a clothesline or by using the Air Only setting.
When the cycle is selected, the Estimated Time Remaining display shows the default time. You can change the actual time in the cycle by increasing or decreasing the cycle time.
Start the dryer.
NOTE : Check the lint screen and remove any lint accumulated from items dried on the drying rack after the cycle is finished.

Dryer Care

CLEANING THE DRYER LOCATION
Keep the dryer area clear and free from items that would block the airflow for proper dryer operation. This includes clearing piles of laundry in front of the dryer.

WARNING
Explosion Hazard
Keep flammable materials and vapors, such as gasoline, away from the dryer.
Place the dryer at least 18 inches (460 mm) above the floor for a garage installation. Failure to do so can result in death, explosion, or fire.

CLEANING THE DRYER INTERIOR

To clean dryer drum

Use a mild hand dish detergent mixed at a low concentration with very warm water, and rub it with a soft cloth.
Rinse well with a wet sponge or towel.
Tumble a load of clean clothes or towels to dry drum OR Use a microfiber cloth and hot water in a spray bottle to clean the drum and a second microfiber towel to dry.

NOTE: Garments that contain unstable dyes, such as denim blue jeans or brightly colored cotton items, may discolor the rear of the dryer interior. These stains are not harmful to your dryer and will not stain future loads of clothes. Dry unstable dye items inside out to avoid transfer of dye.

REMOVING ACCUMULATED LINT
From Inside the Dryer Cabinet
Lint should be removed every 2 years, or more often, depending on dryer usage. Cleaning should be done by a qualified appliance servicer.
From the Exhaust Vent
Lint should be removed every 2 years, or more often, depending on dryer usage.

CLEANING THE LINT SCREEN

Every load cleaning
The lint screen is located in the door opening of the dryer.
A screen blocked by lint can increase drying time.
To clean:

Pull the lint screen straight up. Roll lint off the screen with your fingers. Do not rinse or wash the screen to remove the lint. Wet lint is hard to remove.
Push the lint screen firmly back into place.

IMPORTANT:

Do not run the dryer with the lint screen loose, damaged, blocked, or missing. Doing so can cause overheating and damage to both the dryer and fabrics.
If lint falls off the screen into the dryer during removal, check the exhaust hood and remove the lint. See “Venting Requirements” in the Installation Instructions.

As needed cleaning
Laundry detergent and fabric softener residue can build up on the lint screen. This buildup can cause longer drying times for your clothes, or cause the dryer to stop before
your load is completely dry. The screen is probably clogged if lint falls off while the screen is in the dryer.
Clean the lint screen with a nylon brush every 6 months, or more frequently, if it becomes clogged due to a residue buildup.
To wash:

Roll lint off the screen with your fingers.
Wet both sides of the lint screen with hot water.
Wet a nylon brush with hot water and liquid detergent.
Scrub the lint screen with the brush to remove residue buildup.
Rinse the screen with hot water.
Thoroughly dry the lint screen with a clean towel.
Reinstall screen in dryer.

NON-USE, STORAGE, AND MOVING CARE
Install and store your dryer where it will not freeze. Because some water may stay in the hose, freezing can damage your dryer. If storing or moving your dryer during freezing
weather, winterize it.
Non-Use or Storage Care
Operate your dryer only when you are at home. If you will be on vacation or not using your dryer for an extended period of time, you should:

Unplug the dryer or disconnect the power.
Clean the lint screen. See “Cleaning the Lint Screen.”
Turn off the water supply to the dryer. This helps to avoid unintended flooding (due to a water pressure surge) while you are away.

Moving Care
For power supply cord-connected dryers:

Unplug the power supply cord.
Gas models only: Close the shut-off valve in the gas supply line.
Gas models only: Disconnect gas supply line pipe and remove fittings attached to dryer pipe.
Gas models only: Cap the open gas supply line.
Steam models only: Shut off the water faucet.
Disconnect the water inlet hose from the faucet, then drain the hose. Transport hose separately.
Make sure leveling legs are secure in the dryer base.
Use tape to secure the dryer door.

WARNING

Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.

For direct-wired dryers:

Disconnect power.
Disconnect wiring.
Steam models only: Shut off the water faucet.
Steam models only: Disconnect the water inlet hose from the faucet; then drain the hose. Transport hose separately.
Make sure leveling legs are secure in the dryer base.
Use tape to secure the dryer door.

Reinstalling the Dryer
Follow the Installation Instructions to locate, level, and connect the dryer.

SPECIAL INSTRUCTIONS FOR STEAM MODELS
Water Inlet Hose
Replace the inlet hose and hose screen after 5 years of use to reduce the risk of hose failure. Periodically inspect and replace inlet hose if bulges, kinks, cuts, wear, or leaks are found.
When replacing your inlet hose, record the date of replacement.
To Winterize the Dryer

Unplug the dryer or disconnect the power.
Shut off the water faucet.
Disconnect the water inlet hose from the faucet and drain.

To Use the Dryer Again

Flush water pipes. Reconnect the water inlet hose to the faucet.
Turn on the water faucet.
Plug in the dryer or reconnect power as described in the
Installation Instructions.

Troubleshooting

First, try the solutions suggested here or visit our website at www.whirlpool.com/product_help –In Canada www.whirlpool.ca for assistance and to possibly avoid a service call.

If you experience| Possible Causes| Solution
Dryer Operation
The dryer will not run| Door is not closed completely.| Make sure the dryer door is closed completely.
START/PAUSE not touched firmly or held long enough.| Touch and hold START/PAUSE for 2–5 seconds.
The household fuse is blown or the circuit breaker has tripped.| There may be 2 household fuses or circuit breakers for the dryer. Check that both fuses are intact and tight, or that both circuit breakers have not tripped. Replace the fuses or reset the circuit breaker. If the problem continues, call an electrician.
Incorrect power supply.| Electric dryers require a 240-volt power supply. Check with a qualified electrician.
The wrong type of fuse.| Use a time-delay fuse.
The dryer will not heat| The household fuse is blown or the circuit breaker has tripped.| The drum may be turning, but you may not have heat. Electric dryers use 2 household fuses or circuit breakers. Replace the fuses or reset the circuit breaker. If the problem continues, call an electrician.
Incorrect power supply.| Electric dryers require a 240-volt power supply. Check with a qualified electrician.
The supply line valve is not open.| For gas dryers, make sure that the valve on the gas supply line is open.
Unusual Noise
Humming or whining noise with Steam cycle selected (on some models)| The water pump or water inlet valve (depending on model) on the dryer is running.| The water pump or water inlet valve on the dryer is used during the Steam function. If the dryer has just been installed or unused for an extended period, the pump or valve may be louder and run longer. This is normal.

NOTE: The valve may make this noise even with no water line connected.

Thumping noise| The dryer hasn’t been used in a while.| This is due to temporary flat spots on the drum rollers. The thumping sound will diminish after a few minutes.
Rattling or vibrating noise| A small object caught between the edges of the dryer drum.| Check the front and rear edges of the drum for small objects. Clean out pockets before laundering.
The dryer isn’t properly leveled.| The dryer may vibrate if not properly installed. See the Installation Instructions. All four dryer feet should be in firm contact with the floor.
Clothing is balled up in the dryer.| When balled up, the load will bounce, causing the dryer to vibrate. Separate the load items and restart the dryer.
Clicking noise| The gas valve operating.| On gas dryers, you may hear the gas valve clicking as it opens and closes. This is normal.
A loud humming or increased noise during cycle| The load is packed tightly or the exhaust vent is blocked.| Reduce load size to recommended load size in “Cycle Guide.”

Run the dryer for 5–10 minutes. Hold your hand under the outside exhaust hood to check air movement. If you

do not feel air movement or air movement is minimal, a clean exhaust system of lint or replace the exhaust vent with heavy metal or flexible metal vent. See the Installation Instructions.

Dryer Results
Clothes are not drying satisfactorily or drying times are too long| The ecoBoost™ option is on.| For optimal dry times, turn off the EcoBoost™ option. For optimal energy, turn on the EcoBoost™ option.
The lint screen is clogged with lint.| Clean the lint screen before each load.
The exhaust vent or outside exhaust hood is clogged with lint, restricting air movement.| Run the dryer for 5–10 minutes. Hold your hand under the outside exhaust hood to check air movement. If you

do not feel air movement or air movement is minimal, clean the exhaust system of lint or replace the exhaust vent with heavy metal or flexible metal vent. See the Installation Instructions.

Dryer Results (cont.)

Clothes are not drying satisfactorily or drying times are too long (cont.)| The exhaust vent is not the correct length.| Check that the exhaust vent is not too long or has too many turns. Long venting will increase drying times. See the Installation Instructions.
The exhaust vent diameter is not the correct size.| Use 4″ (102 mm) diameter vent material.
The dryer is not level.| Clothes not contacting the moisture sensors during Automatic cycles. See “Level Dryer” in the Installation Instructions.
The Air Only temperature setting has been selected.| Select the correct temperature for the types of garments being dried. See “Cycle Guide.”
The load is too large and heavy to dry quickly.| Separate the load to tumble freely.
Fabric softener sheets are blocking the grille.| The air outlet grille is just inside the door, behind the lint screen. Check that it is not blocked by a fabric softener sheet.

Use only one fabric softener sheet, and use it only once.

The dryer is located in a room with a temperature below 45ºF (7ºC).| Proper operation of dryer cycles requires temperatures above 45ºF (7ºC).
The dryer is located in a closet.| Closet doors must have ventilation openings at the top and bottom of the door. The front of the dryer requires a minimum of 1″ (25 mm) of airspace, and, for most installations, the rear of the dryer requires 5″ (127 mm). See the Installation Instructions.
Cycle time is too short| The load may not be contacting the sensor strips on Automatic Cycles.| Level the dryer. See the Installation Instructions. All four dryer feet should be in firm contact with the floor.
Steam models only: Clothes are coming out of the Steam Refresh cycle with damp or wet spots.| Under certain environmental or installation conditions, you may experience underlying.
The automatic cycle is ending early.| Change the dryness level setting on Automatic Cycles. Increasing or decreasing the dryness level will change the amount of drying time in a cycle. If loads are consistently ending too early, see also “Changing the Automatic Cycle settings to increase or decrease drying time.”
Lint on load| The lint screen is clogged with lint.| Clean the lint screen before each load.
Stains on load| Improper use of fabric softener.| Add dryer fabric softener sheets at the beginning of the cycle. Fabric softener sheets added to a partially dried load can stain your garments. Do not use fabric softener sheets with steam cycles.
Stains on drum| Loose dyes in clothes.| Drum stains are caused by dyes in clothing (usually blue jeans). These will not transfer to other clothing.
Loads are wrinkled| The load was not removed from the dryer at the end of the cycle.| Steam models only: Select Steam Refresh Cycle to tumble the load with water and heat. This cycle is best for smoothing out wrinkles and reducing odors from dry loads consisting of wrinkle-free cotton, cotton- polyester blends, common knits, and synthetics.

NOTE: Refer to garment care label instructions. Dry-clean-only garments are not recommended.

The dryer was tightly packed.| Dry smaller loads that can tumble freely. Results may also vary depending on fabric type.
Steam models only: For steam cycles, the water is not properly connected to the dryer.| Steam models only: Make sure water is connected to the dryer. Check that the water inlet hose is connected to both the faucet and dryer’s water inlet valve. Check that the water supply is turned on.
Dryer Results (cont.)

Odors| Recent painting, staining or varnishing in the area where your dryer is located.| Ventilate the area. When the odors or fumes are gone from the area, rewash and dry the clothing.
Steam models only: For steam cycles, the water is not properly connected to the dryer.| Make sure water is connected to the dryer. Check that the water inlet hose is connected to both the faucet and dryer’s water inlet valve. Check that the water supply is turned on.
Odors are left in garments after wearing.| Steam models only: To remove odors left in garments after wearing, select Steam Refresh. This cycle is best for reducing wrinkles and odors from dry loads consisting of wrinkle-free cotton, cotton-polyester blends, common knits, and synthetics.
Load too hot| Load removed before cooldown portion of cycle complete.| Allow the dryer to complete the cooldown portion of the cycle before removing the load.
Using the Timed Dry cycle with a high-temperature setting.| Select an Automatic Cycle with a lower heat setting to avoid overdrying the load.
Dryer Displaying Code Message or Cycle Status Indicator Lights Up
“PF” (power failure)| The drying cycle has been interrupted by a power failure.| Touch and hold START to restart the dryer. NOTE: The Control Lock function may be enabled when recovering from a power failure. To unlock the control, touch and hold the CONTROL LOCK for at least 3 seconds.
“L2” Diagnostic Code (low or no line voltage condition)| There may be a problem with your home power supply, keeping the dryer’s heater from turning on.| The dryer will continue to run when this diagnostic code is present. Touch any pad to clear the code from the display and return to the estimated time remaining.

NOTE: This error will only show during the initial installation. Try the following:

Check to see if a household fuse has blown or the circuit breaker has tripped. Electric dryers use two household fuses or breakers. Replace the fuse or reset the circuit breaker.

Confirm that the power cord is properly installed. Refer to the Installation Instructions for details.

Select a Timed Dry heated cycle, and restart the dryer. If the message persists, consult a qualified electrician.

“F# E#” (F1 E1, F3 E1, etc.)

variable service codes

| The dryer is in need of service.| If a code beginning with an “F” appears in the display, alternating between F# and E#, the dryer control has detected a problem that requires service. Call for service.
Check Vent indicator is lit| The lint screen or vent is clogged; the vent is crushed or kinked or has too many turns.| The dryer will continue to run when this indicator is lit. Try the following:

• Clean lint screen.
• Check to see if the vent run from the dryer to the wall is crushed or kinked.
• Confirm that the vent run from the dryer to the wall is free of lint and debris.
• Confirm that the exterior vent exhaust hood is free of lint and debris.
• Confirm that your vent system falls within the recommended run length and number of elbows for the type of vent you are using. Refer to “Plan Vent System” in the Installation Instructions for details.
• Select a Timed Dry heated cycle, and restart the dryer.
• If the indicator remains lit, have your entire home venting run cleaned.

“Loc” or “Lc”| The Control Lock is enabled.| Touch and hold the CONTROL LOCK for 3 seconds to unlock the controls of the dryer. During this time the LED Display will count down 3-2-1. When the Control Lock is disabled, the LED Display will clear.

WHIRLPOOL ® LAUNDRY LIMITED WARRANTY

| ATTACH YOUR RECEIPT HERE. PROOF OF PURCHASE IS REQUIRED TO OBTAIN WARRANTY SERVICE.
Please have the following information available when you call the Customer eXperience Center:
■ Name, address, and telephone number
■ Model number and serial number
■ A clear, detailed description of the problem
■ Proof of purchase including dealer or retailer name and address
---|---

IF YOU NEED SERVICE:

Before contacting us to arrange service, please determine whether your product requires repair.
Some questions can be addressed without service. Please take a few minutes to review the Troubleshooting or Problem Solver section of the Use and Care Guide, scan the QR code on the right to access additional resources, or visit https://www.whirlpool.com/product_help.
All warranty service is provided exclusively by our authorized Whirlpool Service Providers.
In the U.S. and Canada, direct all requests for warranty service to:

Whirlpool Customer eXperience Center
In the U.S.A. call 1-800-253-1301. In Canada call 1-800-807-6777.
If outside the 50 United States and Canada, contact your authorized Whirlpool dealer to determine if another warranty applies.

https://www.whirlpool.com/product_help

ONE-YEAR LIMITED WARRANTY

WHAT IS COVERED

For one year from the date of purchase, when this major appliance is installed, operated, and maintained according to instructions attached to or furnished with the product, Whirlpool Corporation or Whirlpool Canada LP (hereafter “Whirlpool”) will pay for Factory Specified Replacement Parts and repair labor to correct defects in materials or
workmanship that existed when this major appliance was purchased, or at its sole discretion replace the product. In the event of product replacement, your appliance will be warranted by the remaining term of the original unit’s warranty period.
YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN. Service must be provided by a Whirlpool designated service company. This limited warranty is valid only in the United States or Canada and applies only when the major appliance is used in the country in which it was purchased. This limited warranty is effective from the date of original consumer purchase. Proof of original purchase date is required to obtain service under this limited warranty.

WHAT IS NOT COVERED

Commercial, non-residential, multiple-family use, or use inconsistent with the published user, operator, or installation instructions.
In-home instruction on how to use your product.
Service to correct improper product maintenance or installation, installation not in accordance with electrical or plumbing codes, or correction of household electrical or
plumbing (i.e. house wiring, fuses, or water inlet hoses).
Consumable parts (i.e. light bulbs, batteries, air or water filters, preservation solutions, etc.).
Defects or damage caused by the use of non-genuine Whirlpool parts or accessories.
Conversion of your product from natural gas or L.P. gas or reversal of appliance doors.
Damage from accident, misuse, abuse, fire, floods, acts of God, or use with products not approved by Whirlpool.
Repairs to parts or systems to correct product damage or defects caused by unauthorized service, alteration, or modification of the appliance.
Cosmetic damage including scratches, dents, chips, and other damage to appliance finishes unless such damage results from defects in materials and workmanship and is
reported to Whirlpool within 30 days.
Discoloration, rust, or oxidation of surfaces resulting from caustic or corrosive environments, including but not limited to, high salt concentrations, high moisture or
humidity, or exposure to chemicals.
Pick-up or delivery. This product is intended for in-home repair.
Travel or transportation expenses for service in remote locations where an authorized Whirlpool servicer is not available.
Removal or reinstallation of inaccessible appliances or built-in fixtures (i.e. trim, decorative panels, flooring, cabinetry, islands, countertops, drywall, etc.) that interfere with servicing, removal, or replacement of the product.
Service or parts for appliances with original model/serial numbers removed, altered, or not easily determined.
The cost of repair or replacement under these excluded circumstances shall be borne by the customer.

DISCLAIMER OF IMPLIED WARRANTIES
IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. Some states and provinces do not allow limitations on the duration of implied warranties of merchantability or fitness, so this limitation may not apply to you. This warranty gives you specific legal rights, and you also may have other rights that vary from state to state or province to province.
DISCLAIMER OF REPRESENTATIONS OUTSIDE OF WARRANTY
Whirlpool makes no representations about the quality, durability, or need for service or repair of this major appliance other than the representations contained in this Warranty. If you want a longer or more comprehensive warranty than the limited warranty that comes with this major appliance, you should ask Whirlpool or your retailer about buying an extended warranty.
LIMITATION OF REMEDIES; EXCLUSION OF INCIDENTAL AND CONSEQUENTIAL DAMAGES
YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN.
WHIRLPOOL SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so these limitations and exclusions may not apply to you. This warranty gives you specific legal rights, and you also may have other rights that vary from state to state or province to province.

Notes

Assistance or Service

Before calling for assistance or service, please check “Troubleshooting” or visit www.whirlpool.com/help.
It may save you the cost of a service call. If you still need help, follow the instructions below.
When calling, please know the purchase date and the complete model, and the serial number of your appliance.
This information will help us to better respond to your request.
If you need replacement parts or to order accessories
We recommend that you use only FSP ® Factory Specified Parts.
These parts will fit right and work right because they are made with the same precision used to build every new WHIRLPOOL ® appliance.
To locate FSP ® replacement parts, assistance in your area, or accessories:

Whirlpool Corporation Customer Experience Center
1-800-253-1301
www.whirlpool.com
1-800-442-9991 (Accessories)
www.whirlpool.com/accessories| Whirlpool Canada LP
Customer Experience Centre
1-800-807-6777
www.whirlpool.ca
---|---

or call your nearest designated service center or refer to your Yellow Pages telephone directory.

Our consultants provide assistance with

In the U.S.A.

Features and specifications on our full line of appliances.
Installation information.
Specialized customer assistance (Spanish speaking, hearing impaired, limited vision, etc.).

In the U.S.A. and Canada

Use and maintenance procedures.
Accessory and repair parts sales.
Referrals to local dealers, repair parts distributors, and service companies. Whirlpool designated service technicians are trained to fulfill the product warranty and provide after-warranty service, anywhere in the United States and Canada.

You can write with any questions or concerns at:

Whirlpool Corporation
Customer Experience Center
553 Benson Road
Benton Harbor, MI 49022-2692| Customer Experience Centre
Whirlpool Canada LP
Unit 200-6750 Century Ave
Mississauga, Ontario L5N 0B7
---|---

Please include a daytime phone number in your correspondence.

® / TM © 2015 Whirlpool. All rights reserved.
Used under license in Canada.
Printed in U.S.A.