VIVO STAND-V200R Dual Vertically Stacked Ultra Wide Monitor Desk Mount Instruction Manual
- June 14, 2024
- Vivo
Table of Contents
VIVO STAND-V200R Dual Vertically Stacked Ultra Wide Monitor Desk Mount
Instruction
WARNING
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
TOOLS NEEDED
NOTE: SOME HARDWARE MAY NOT BE USED
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Installation
STEP 1a – Clamp Installation
Install Lower Pole (D) to Clamp (C) using M6x16mm Screws (S-A) and 4mm Allen
Wrench (T-A). Remove protective film from Pads (I) and apply them to Clamp (C)
as shown.
STEP 1b – Grommet Installation
Remove the Screw (C1) from the Clamp Bolt (C2) and remove the Clamp Bolt from Clamp (C).
STEP 1b – Grommet Installation
STEP 2
Slide Pole Cable Clip (G) and one VESA Bracket (B) onto Lower Pole (D). Adjust the height location of VESA Bracket (B) and tighten using the 6mm Allen Wrench (T-B).
STEP 3
Press Pole Cap (F) into Upper Pole (E), using the side without internal threading .
STEP 4
Screw Upper Pole (E) onto Lower Pole (D). Slide remaining Cable Clip (G) and VESA Bracket (B) onto Upper Pole (E). Adjust the height location of VESA Bracket (B) and tighten using the 6mm Allen Wrench (T-B).
STEP 5
STEP 6
Slide monitors with VESA Plates onto VESA Brackets (B) and secure using M6x10mm Thumbscrew (S-B).
STEP 7
WARNING
Keep the displays positioned over the desktop within the arrow range shown.
ADJUST AS DESIRED
Use 6mm Allen Wrench (T-B) to loosen or tighten Monitor Bracket (B) tension.
Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response
times. If any parts are received damaged or defective, please contact us. We
are happy to replace parts to ensure you have a fully functioning product.
Phone : 309-278-5303 AVG.
RESOLUTION TIME (within office hrs): 5M 4S
www.vivo-us.com
AVG. RESOLUTION TIME (within office hrs): < 15 M
help@vivo-us.com
AVG. RESPONSE TIME (within office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>