2E-CJSPBPL-BK Five In One Multi Function Air Pump User Guide

2E-CJSPBPL-BK Five In One Multi Function Air Pump

Thank you for choosing this product!
Please read the instructions carefully before use. After reading, save it for future reference. The images in this manual are for reference only and may differ from the actual product. The manufacturer reserves the right to make changes to the appearance and characteristics of the product.

Product specification

Product side schematic

Using the flashlight (four modes)

Operation: Press and hold the «ON/OFF Switch» to turn on the device; click «ON/OFF Switch» to turn on LED lights, and cycle as follows:

1. Turn on the LED Flashlight
2. Turn on LED Flashlight SOS mode
3. Turn on the LED Flashlight Strobe mode
4. Turn on the Reading light
5. Turn off LED lights

Warning
Reading light and flashlight modes are too strong, Please don’t aim directly at people’s eyes!

Using air pump

Note: This product can be used to supply air to the tyres of domestic vehicles, such as 0-3.3 bar or 0-47 PSi, bicycle tyres, balls, etc.
Pumping tires

1. Depending on the equipment, install the appropriate nozzle.
2. Connect the air pipe between the air pump and the required inflation device.
3. Press the ON/OFF switch to start, then press the M key to the required inflating equipment, and press +/-to adjust the tire pressure.
4. Press the «Unit switch» key to select BAR, KPA, KG/CM2/PSI modes.
5. Press and hold the «M» key to restore the factory settings of the air pump
6. Press the AIR pump key to start the pump.
7. When it is filled, stop inflating, press AIR to turn off the pump, remove the air pipe and put it back into the package.

Tire pressure testing:

1. According to the equipment in which the pressure is to be measured, install the appropriate air nozzle.
2. Connect the air tube to the air pump and the required inflation device.
3. Press the AIR pump button to turn on the power. Current tire pressure will be displayed on the screen.

The standard pressure range is shown in the table below:

2.3 – 2.5

| ****

33 – 36

2. Motorcycles| 1.8 – 3.0| 26 -4 3
3. Bicycles| 2.4 – 4.1| 35 – 60
4. Road bikes| 6.9 – 8.2| 100 – 120
5. Basketball ball| 0.5 – 0.6| 7 – 9
5. Football ball| 0.6 – 0.7| 9 – 11
5. Volleyball ball| 0.4 – 0.5| 6 – 7

Warning

1. The pump inflates objects by automatically filling and stopping when the selected value is reached. When setting tire pressure, please evaluate or find the appropriate standard tire pressures to avoid over-inflating and bursting!
2. The mechanical parts of the air pump consist of a motor and a cylinder. These two parts produce heat.

Emergency start of 12V accu batteries in vehicles

1. Connect the original jump cable to the «12V car emergency start socket», then connect the clamps to the positive and negative terminals of vehicle battery (for 12V battery only)
2. Start the car.
3. After the car starts, please remove the battery clamp from the car battery and let the car engine continue to run.

Warning!

• Do not disconnect the battery clamp to the positive and negative electrodes of the automobile battery during use.
• Do not clamp the red or black clips or touch each other.

Charging the device

Note: Please make sure this product is turned off before charging.

• A: The multifunctional air pump can be charged with an AC power adapter (sold separately).
• Connect the 5V power adapter to the TYPE-C input port with the appropriate cable.
• Connect the AC plug to an indoor AC outlet and start charging.
• B: The multi-functional air pump can be charged by solar panel (sold separately)
• Connect the output terminal of the solar panel with a nominal voltage of 5V-7V to the TYPE-C input terminal of the product.
• Adjust the solar panel towards stronger sunlight and start charging.
• TIPS: 1. Try to position the solar panel at an angle of approximately 90 degrees to the sunlight to ensure the best charging effect.
• During the charging process, the charging icon flashes and the long grid lights represent the actual charge level of the product. When charging is complete, the charging icon will light up.

Product Specification

Battery capacity

| 10000| mAh
37| Wh
JUMP Start EC5| 12| V
Maximum start/peak current| 400/1000| A
Maximum starting vehicle displacement| Gasoline| 6.0| CC
Diesel| <3.0| CC
USB-5V OUT| Maximum current| 2.4| A
USB-C 5V IN| Charging time| 4-5| h

LED flashlight

| Power| 10| w

Light Mode

| High beam – 1300 lumens
SOS
Strobe
Reading light| Power| 3| w
Weight| 0.6| kg
Dimensions| 155.5х106.5х61.5| mm
Automatic shutdown time| 10| s

Barometric unit

| PSI| | P
BAR| | P

Preset pump setting

| ****

Cars

| 36| PSI
2.5| BAR

Bicycle

| 36| PSI
2.5| BAR

Ball Games

| 5| PSI
0.3| BAR

Maximum pump setting

| ****

Cars

| 47| PSI
3.3| BAR

Bicycle

| 123| PSI
8.5| BAR

Ball Games

| 15| PSI
1.1| BAR

Minimum pump setting

| ****

Cars

| 24| PSI
1.7| BAR

Bicycle

| 10| PSI
0.7| BAR

Ball Games

| 4| PSI
0.3| BAR

Specification of joints

| All metal parts| French-American head|
Needle Air nozzle| Ball Games|

Two black plastic nozzles

| balls, boats, inflatable toys and other inflatable objects|

Setting the pump

1. Car tire inflation: press the ON/OFF switch to turn on the device, then press the M key to enter the car tire inflation menu bar, the default value is 2.5 bar, and press the +/- button to increase or decrease the set value of automatic stop. The vehicle tire inflation setting can be adjusted to recommended pressures to inflate motorcycle tires.
2. Bicycle tire inflation: press the ON/OFF switch to turn on the device, then press M twice to enter the bicycle tire inflation menu bar, the default value is 2.5 bar, then press the +/- buttons to increase or decrease the set value of automatic stop.
3. Ball inflation: press the ON/OFF button to turn on the device, then press the M button three times to enter the menu bar of the inflation ball, the default value is 0.3 bar, press the +/- buttons to increase or decrease the set value of automatic stop.
4. Air pressure unit setting: press the ON/OFF switch to turn on the device, then press the M key four times to enter the air pressure unit setting menu bar, and press +/- to switch the air pressure unit to BAR or PSI respectively.
5. After completing the above settings, press M again to exit.

Warning

1. Before using this product, please read and understand the operating instructions carefully. When charging, use the dedicated charger and charge it according to the instructions. Charging with constant current and constant voltage. Reverse charge prohibited.
2. This product has built-in high-quality long-lasting batteries, no memory effect, and large capacity (recommended storage temperature -20 to 60C).
3. For long-term storage, please charge the product every 3-6 months to prolong battery life.
4. This device has a built-in non-removable battery. Do not attempt to remove the battery to avoid damaging the equipment.
5. The charger and this product become slightly warm during charging, which is normal.
6. Please keep this product away from fire, water and other liquids. Avoid prolonged exposure to direct sunlight.
7. Do not short-circuit the contacts of the product, do not store the product together with coins, jewelry, keys and other metal objects.
8. This product has a built-in high-voltage power supply, non-professional personnel should not attempt to disassemble the product to avoid accidents.
9. At the end of battery life, please do not dispose of this product with household waste, so as not to harm the environment. Please dispose of used batteries under local laws and regulations.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>