VIVO V300GW Triple Monitor Desk Mount Pneumatic Arms Fixed Instruction Manual
- June 14, 2024
- Vivo
Table of Contents
Triple Monitor Desk Mount –
2 Pneumatic Arms + 1 Fixed
Instruction Manual
V300GW Triple Monitor Desk Mount Pneumatic Arms Fixed
SKU: STAND-V300G/W
WARNING!
If you do not understand these directions, or if you have any doubts about the
safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts. Improper
installation may cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual. Do not exceed
weight capacity. We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly or inappropriate use.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT
TIPOVER:
- TO PREVENT TIPPING, PLEASE BE CAREFUL NOT TO EXTEND THE ARMS TOO FAR FORWARD OR BACKWARD.
- NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR STAND.
- USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
TOOLS NEEDED
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED DO NOT EXCEED WEIGHT
CAPACITY.
Failure to do so may result in serious injury.
ASSEMBLY STEPS
STEP 1
Thread Pole (A) onto Clamp (C). Tighten the set screw in the back of Clamp (C)
with 3mm Allen Wrench (T-A) to secure Pole (A) in place.
STEP 2
Slide Shaft Collar (D) onto Pole (A). Tighten the handle on Shaft Collar (D)
to secure it in place. Slide Arm Bracket (B) onto Pole (A) to that it rests on
Shaft Collar (D). Tighten the screw in the back of Arm Bracket (B) with 5mm
Allen Wrench (T-B).
STEP 3
Place an Arm Extension (F) on either side of Arm Bracket (B). Attach the
second set of Arm Extensions (F) to the first set. Tighten the set screws in
the back of Arm Extensions (F) using 3mm Allen Wrench (T-A). Slide Shaft
Collar (D) onto Pole (A). Tighten the handle on Shaft Collar (D) to secure it
in place.
STEP 4
OPTION A: Flat Back Monitor
Mount Monitor Arm (E) to your monitor using M4x8 Screws (M-C) or M4x12 Screws
(M-A).
NOTE: Hand tighten screws to avoid stripping the plastic screw heads.
OPTION B: Curved Back Monitor
Mount Monitor Arm (E) to your monitor using M4x30 Screws (M-B) with Spacers
(M-D).
STEP 5
Mount VESA Plate (G) to your monitor using M4x8 Screws (M-C) or M4x12 Screws
(M-A) or M4x30 Screws (M-B). If necessary, Spacers (M-D) may be used.
STEP 6
Mount Monitor Arms (E) onto Arm Extensions (F). Slide VESA Plate (G) onto Pole
(A). Tighten set screws in the back of Monitor Arms (E) and VESA Plate (G)
using 3mm Allen Wrench (T-A).
STEP 7
Insert Plastic Covers (H) into Monitor Arms (E) and Arm Extensions (F). Adjust
the tilt of Monitor Arms (E) and VESA Plate (G) using 5mm Allen Wrench (T-B).
The tension of Monitor Arms (E) can be adjusted using 5mm Allen Wrench (T-B).
STEP 8
Attach Cable Clips (I) to Pole (A). Manage monitor cables into cable covers on
underside of Monitor Arms (E), Arm Extensions (F) and Cable Clips (I). Leave
enough slack to allow full adjustment and motion of arms.
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
LAST UPDATED: 02/16/2023
REV1
Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer
immediate assistance with rapid response times. If any parts are received
damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
Scan the QR code with your
mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/stand-v300g
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
309-278-5303| AVG. RESOLUTION TIME
(within office hrs): 5M 4S
---|---
www.vivo-us.com
Chat live with an agent!| AVG. RESOLUTION TIME (within office hrs): < 15 M
help@vivo-us.com| AVG. RESPONSE TIME (within office
hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>