BULIST UD01 Electronic Keypad Deadbolt Lock with Voice Prompts Instruction Manual
- June 14, 2024
- BULIST
Table of Contents
Installation Manual
Part 1. Explosive View
(1)
Emergency M-Key
| (2)
Exterior Assembly
| (3)
Latch
---|---|---
Part 2. Installation Part List
(4)
Latch Screws
| (5)
Mounting Plate
---|---
(6)
35mm <door thickness <45mm
45mm <=door thickness <50mm
Mounting Screws
| (7)
Interior Assembly
(8) (9)
Interior Screws
| (10)
Battery Cover
Part 3. Check Door Dimensions
-
Door thickness:
1-3/8″ to 2-3/4″
35mm to 70mm -
2-3/8″ or 2-3/4″
60mm or 70mm -
Diameter:
2-1/8″(54mm)
Part 4. Install latch and deadbolt
Ensure up sign is up
Align latch slot with door hole center
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
How to adjust the length of the latch
Facing the side with the up sign, press your thumb against the deadbolt to ensure that it does not extend. Rotate it clockwise, then pull it out and rotate it counterclockwise until you hear a snap
Part 5. Install exterior Assembly
- Ensure deadbolt be in unlock position
- Ensure the emergency M-key is removed
-
Route the cable under the latch
-
Paddle vertical state
-
Route the cable through the mounting plate hole
-
Ensure the paddle is in the center of the hole
-
Fix the mounting plat with mounting screws.
Ensure exterior assembly and mounting plate are vertical
Part 6. Install interior Assembly
Remove the battery cover
Plug in the cable and ensure tight the cable connection
Fix interior assembly with interior screws.
Ensure interior assembly is vertical
Install the battery
Part 7. First Startup
The lock first startup, it will automatically adapt to the actual running direction through unlocking and locking actions.
Part 8. Check after installation
Step 1: Enter default user code 123456 and unlock key to check unlock function.
Step 2: Check auto lock function, wait 10 seconds, the lock will automatically close.
Step3: Check hand knob open the lock, Rotate the hand knob to smoothly open and close the lock.
Step4: Check unlock/lock button, click the button to open and close the lock normally.
Step5: Check emergency M-key: use emergency M-key can open and close the lock normally.
If all the above functions are normal, you can press unlock key on the keypad for 2 seconds to add your user code.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>