BULIST UD01F Fingerprint Deadbolt Door Lock Installation Guide
- June 16, 2024
- BULIST
Table of Contents
BULIST UD01F Fingerprint Deadbolt Door Lock Installation Guide
Part 1. Explosive View
Part 2. Installation Part List
Part 3. Check Door Dimensions
Part 4. Install latch and deadbolt
Facing the side with the up sign, press your thumb against the deadbolt to ensure that it does not extend. Rotate it clockwise, then pull it out and rotate it counterclockwise until you hear a snap
Part 5. Install exterior Assembly
- Ensure deadbolt be in unlock position
- Ensure the emergency M-key is removed
Part 6. Install interior Assembly
Part 7. First Startup
The lock first startup, it will automatically adapt to the actual running direction through unlocking and locking actions
Part 8. Check after installation
Step 1: Enter default user code 123456 and unlock key to check unlock
function.
Step 2:Check auto lock function, wait 10 seconds, the lock will automatically
close.
Step3:Check hand knob open the lock, Rotate the hand knob to smoothly open and
close the lock.
Step4: Check unlock/lock button, click the button to open and close the lock
normally.
Step5: Check emergency M-key: use emergency M-key can open and close the lock
normally.
If all the above functions are normal, you can press unlock key on the keypad
for 2 seconds to add your user code.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>