ETGlife ETG 102 Portable Blender Owner’s Manual
- June 15, 2024
- ETGlife
Table of Contents
ETGlife ETG 102 Portable Blender
Introduction
Inspect Unit Before Use.
Contact us immediately for any damaged or defective units.
(Go to your Amazon order detail page “order”- “sold by”- “contact seller” for
assistance)
SPECIFICATIONS
- Dimensions 4 4 8.7 Inches
- Volume Capacity 16 oz
- Battery Specs (2) 1200mAh 7.4 V 17A Rating
- Motor Specs 704 V
- Rated Power 126W
- Motor Rotating Speed 18,000 RPM
OPERATION
| INDICATOR LIGHT | REASON |
|---|---|
| Blue Solid Light | Charge is complete |
| Blue Light Flashes 5X | Ready to blend |
| Solid Red Light | Charging |
| Red Light Flashes 5X | Top not screwed on properly |
| Red Light Flashes 10X | Needs charging |
COMPONENTS
HOW TO USE
-
STEP 1
Fully charge the blender using the provided USB cable. Insert the USB cable into the charging port of the blender top and the other end of the cable into a USB port. Average charging time is 2 to 4 hours. -
STEP 2
Unscrew blender top from the cup. -
STEP 3
Fill the cup with a liquid base such as water or milk of choice along with your favorite mixers such as fruits, shake mix, frozen fruits, or ice. We recommend a 2:1 ratio of liquid to solids. For example, 2 parts liquid to 1 part solids. -
STEP 4
Twist blender top onto the cup, a blue flashing light will appear when the blender top is securely twisted on.
NOTE : If the indicator light flashes red, the blender top needs to be tightened.
- STEP 5
gently shake to mix the contents, if needed.The blender will run continuously for up to 45 seconds and shut off automatically.
TROUBLESHOOTING
| PROBLEM | PRIMARY CAUSE | SOLUTION |
|---|---|---|
| Blue light flashes 5X | The unit is ready for use. | Double-tap the power button |
to start the blender.
Red light flashes 5X| The blender top is not securely twisted onto the cup.|
Tightly secure the blender top to the cup.
Red light flashes 10X| Battery is not sufficiently charged.| Charge the
blender top with the included USB charging cable. Once fully charged the
indicator light turns blue.
Blender top is leaking| Blender top is not securely connected to the cup.|
Tighten the blender top to the cup.
Red and blue lights flash 10 X during operation| Blender motor is locked.|
Clear any food obstructions and restart the blender.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>