ZEBRA ZT610 Media Bracing Disk Installation Kit Instruction Manual

ZEBRA ZT610 Media Bracing Disk Installation Kit Instruction Manual

Installation Instructions

Read these instructions thoroughly before installing this kit.
This document applies to the following printers:

• ZT411/ZT421
• ZT510
• ZT610/ZT620

Parts List

Before proceeding, verify that your kit contains the following items. To reorder specific parts, navigate to zebra.com/parts, and select your printer model.

Media bracing disk| | Qty 1
---|---|---

Install the Media Bracing Disk on a ZT610 or ZT620 Printer

1. Install media as instructed in the User Guide for your printer.
2. Place the media bracing disk on the spindle and press it up against the roll of media.

Install the Media Bracing Disk on a ZT411, ZT421, or ZT510 Printer

1. Install media as instructed in the User Guide for your printer.

2. Slide out the media guide.

3. Place the media bracing disk against the roll of media.
   

4. Slide in the media guide until it just touches the edge of the disk.

ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. ©2023 Zebra Technologies Corporation and/or its affiliates. All rights reserved. | zebra.com | PATENTS: ip.zebra.com

References

• Patents | Zebra
• Patents | Zebra
• Zebra Technologies | Visible. Connected. Optimized.
• Printer Parts | Printer Repair Parts | Zebra

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>