WiZ 348603597 Remote Control User Guide

WiZ 348603597 Remote Control

PRODUCT DESCRIPTION

• A Turn ligh s ON
• B Turn lights OFF
• C Night ligh
• D Favorite modes 1-4
• E Brightness

Before starting the setup

Before starting the setup process, make sure at least 1 WiZ light in the room is turned on and connected to Wi-Fi.

1. SELECT ROOM IN THE APP
   Press+ on the top right corner and select “WiZmote”.

2. ADD WiZMOTE TO ROOM
   Follow the on-screen steps in the app to complete setup.

3. ENJOY USING THE WIIMOTE
   Quick and easy control of your lights.

Notes:

1. The WiZmote is attached to a single room and only controls the lights in that room You can move the WiZmote ,n the app if you want it to control another room Instead.
2. You can change the 4 favorites of the room in the app.

Need help?
Get in touch through our in-app chat support.

SETUP WITHOUT APP

If you just bought new WiZ lights and want to control them without connecting them to Wi-Fi, you can link them directly to the WiZmote. Make sure the lights are not already paired in the WiZ app before you do so.

1. INSTALL YOUR WIZ LIGHT
   Turn off the light you want the WiZmote to control. Then turn it back on again.

2. LINK WIZMOTE TO LIGHT
   Press the “ON” button 3 times in the first 10 seconds the light is turned back on.

3. ENJOY USING THE WiZMOTE
   Quick and easy control of your lights.

Notes:

1. You can only link the WiZmote with WiZ lights which have a firmware version above 1.16.0 If your lights were produced before 2020, you will need to pair them in the app
2. 2. If you pair your lights in the app, they will stop responding to the WiZmote they were previously linked to until you add the WiZmote to the room 1n the app.

Need help?
Go to faq.wizconnected.com

SPECIFICATIONS

What does It do?
The WiZmote enables a direct control of your WiZ L ghts, without going through your WI-Fi router.
The control range is approx11’Thltely 15 meters/ 50 feet in a normal indoor environment with partitions and walls. Range can be longer with clear line of sight. The exact distance depends on the surrounding envtronment as obstacles may weaken he signal.

Important Information

• For indoor use only, Do not try to open or repair th device (e)(cept battery replacement) Store in dry location only.
• Use only with specified batt ries: do not use rechargeable batteries; do not use a different brand or new/old batteries together; promptly replace exhausted batteries.
• This!> remote control Is not a toy.
• Keep It away from water and h al sources.

Symbols explanation
Waste Electrical and Electrorn<. Equipment
This product must b disposed or at a designated collection point for Electrical and Electronic waste. For more 1nformatIon. contact your local city oftic or th shop where you purch sed tho product
Indoor use only

FCC Rules

Caution:
This device complies with Part 15 of the FCC Rul s / Industry Canada license- exempt RSS stand rd(sl Operation is subj ct to the following two conditions.

1. This device may not cause harmful interference, and
2. This device mus accept any interference received, including interference that may cause undesired operation
   Changes or modifications not expres!lly approved by the party responsible for compliance could void the user’ authority to operate the equipment.

NOTE:
This equipment has been tested and found to comply with the hmits for a Class B digital device, pursuant to part 15 of the FCC Rules. These hm1ts are designed to provide reasonable protection against harmful interference nee In a residential installation. This equipment generates uses and can radiate radio frequency energy and. if not installed and used In accordance nee with th instructions, may cause the harmful mt reference to radio communications.
However r, there 1s no guarantee that interference will not occur in a particular installation. If this equipment does caus harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try lo corr ct the 1nter1′ r, nee by one or more of the following measures:

• Recent or relocate the receiving ng ant nna.
• increase the s separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult th dealer or an experienced radio/TV technician for help.

W1-F1. the W1-FI logo, the W1Fi CERTIFIED logo are registered trademarks of W1-F1 Alliance. Wi-Fl CERTIFIED'”, WPA2 … are trademarks of W1-Fi Alliance
Google. Google Play and lhe Google Pl y logo are trade rks of Googl LLC.
The Apple logo and Sin are trademarks of Apple Inc., registered in th U.S. and other countries and regons, App Store is a service mark of Apple Inc.
All product names, logos, and brands are property of their..-respective owners.
Any use of such marks by Signify 1s under Iinse.

References

• Home | Smart lighting for your daily living | WiZ

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>