BARNES Jeep JT Pinch Weld Covers Installation Guide
- June 14, 2024
- BARNES
Table of Contents
BARNES Jeep JT Pinch Weld Covers Installation Guide
Jeep JT Pinch Weld Covers Installation Instructions
Thank you for purchasing our Jeep JT pinch weld covers!
Installation Notes:
- These panels are designed to fit a 2020-Current Jeep JT Gladiator
- Refer to your factory service manual for removal of any part.
Tools required:
- 10mm Wrench
- 10mm Socket
- 4mm Allen Socket
- Ratchet
Contents of Kit
Bill Of Materials for B4WK12748
QTY| Part Number| Description
2| B4W125158P| JL/JT Pinch Weld Cover Front Powder Coated
1| B4W125160P| JT Rear Pinch Weld Cover Passenger Powder Coated
1| B4W125161P| JT Rear Pinch Weld Cover Driver Powder Coated
16| HPN-M6-A2-BL| M6 Hexagon Nut Black Stainless Steel
16| HTW-M6-A2-BL| M6 Form B Flat Washer Black Stainless Steel
16| HRSW-M6-A1-BL| M6 Rectangular Profile Spring Washer Black Stainless Steel
20| SSB-M6-25-A2-BL| M6 x 25mm Socket Button Screw Black Stainless Steel
Step 1:
Park the Jeep on a level surface and remove any factory rocker panel that may
be installed.
Step 2:
Remove the 2 bolts holding the bottom of the front fender to the pinch seam.
Step 3:
Place the front pinch weld cover on the Jeep. Install the 2 supplied M6 bolts
into the holes where the bolts were removed in step 2.
Step 4:
Install the other supplied hardware into the pinch seam as shown below in the
following order: washer, split washer, nut.
Step 5:
Install the rear pinch seam cover on the Jeep with the supplied hardware.
Step 6:
Repeat steps 2 through 5 on the opposite side of the vehicle
Congratulations! You Have finished the installation of the Barnes4wd Jeep
JT Pinch Weld Covers
Professional Services Disclaimer:
The content of all pages of this website (collectively, the “Website”), such
as text, graphics, images, information and other material (collectively,
“Content”) is for informational purposes only. Any information furnished on
this Website is not intended nor implied to be automotive advice and is not
intended to replace personal consultation with a qualified automotive service
technician, mechanic, or similar automotive professional.
Barnes 4WD has not examined the Content for accuracy, timeliness,
completeness, appropriateness, or helpfulness. Barnes 4WD does not endorse any
specific tests, products, procedures, opinions, or other information that may
be mentioned on this Website. Your reliance upon information and Content
obtained by you at or through this Website is solely at your own risk. IN NO
EVENT SHALL BARNES 4WD BE LIABLE OR
OTHERWISE RESPONSIBLE FOR ANY DAMAGE OR INJURY (INCLUDING DEATH) TO YOU, OTHER
PERSONS, OR PROPERTY ARISING FROM ANY USE OF ANY PRODUCT, INFORMATION, IDEA,
OR INSTRUCTION CONTAINED IN THE CONTENT.
BARNES 4WD DOES NOT MAKE ANY REPRESENTATION OR WARRANTY, EXPRESS OR IMPLIED,
AT LAW OR IN EQUITY, WITH RESPECT TO ANY
PRODUCT FEATURED ON THE WEBSITE, INCLUDING WITHOUT LIMITATION WITH RESPECT TO
MERCHANTABILITY, FITNESS FOR ANY
PARTICULAR PURPOSE, VALUE, VALIDITY, OR ENFORCEABILITY, AND ANY AND ALL SUCH
OTHER REPRESENTATIONS OR WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED.
