BARNES 2SEV-L Series 2 Inch Spherical Solids Handling Vortex, Single Seal Instruction Manual
- June 8, 2024
- BARNES
Table of Contents
BARNES 2SEV-L Series 2 Inch Spherical Solids Handling Vortex, Single Seal
DESCRIPTION
SUBMERSIBLE NON-CLOG SEWAGE PUMP DESIGNED FOR TYPICAL RAW SEWAGE APPLICATIONS
MODEL NO| PART NO| HP| VOLT/PH| Hz| RPM (Nom)| NEMA START CODE| INSUL. CLASS| FULL LOAD AMPS| LOCKED ROTOR AMPS| CORD SIZE| CORD TYPE| CORD O.D
inch (mm)
---|---|---|---|---|---|---|---|---|---|---|---|---
2SEV1522L| 104187| 1.5| 240/1| 60| 3450| A| F| 13.5| 31.5| 12/3| SOW| 0.610
(15.5)
2SEV1592L| 104188| 1.5| 200/240/3| 60| 3450| C| F| 10.4/9.8| 27.0| 14/4| SOW|
0.600 (15.2)
2SEV1542L| 104189| 1.5| 480/3| 60| 3450| F| F| 5.2| 13.5| 14/4| SOW| 0.600
(15.2)
2SEV1552L| 105774| 1.5| 600/3| 60| 3450| F| B| 3.8| 11.0| 14/4| SOW| 0.600
(15.2)
2SEV2022L| 104190| 2.0| 240/1| 60| 3450| C| F| 15.6| 42.0| 12/3| SOW| 0.610
(15.5)
2SEV2092L| 104191| 2.0| 200/240/3| 60| 3450| J| F| 10.8/10.0| 30.0| 14/4| SOW|
0.600 (15.2)
2SEV2042L| 104192| 2.0| 480/3| 60| 3450| J| F| 5.5| 15.0| 14/4| SOW| 0.600
(15.2)
2SEV2052L| 105775| 2.0| 600/3| 60| 3450| J| B| 4| 12.0| 14/4| SOW| 0.600
(15.2)
OPTIONAL – Temperature sensor cord for 3 phase models is 14/3 SOW, 0.530 (13.5mm) O.D.
IMPORTANT!
- PUMP MAY BE OPERATED “DRY” FOR EXTENDED PERIODS WITHOUT DAMAGE TO MOTOR AND/OR SEALS.
- INSTALLATIONS SUCH AS DECORATIVE FOUNTAINS OR WATER FEATURES PROVIDED FOR VISUAL ENJOYMENT MUST BE INSTALLED IN ACCORDANCE WITH THE NATIONAL ELECTRIC CODE ANSI/NFPA 70 AND/OR THE AUTHORITY HAVING JURISDICTION. THIS PUMP IS NOT INTENDED FOR USE IN SWIMMING POOLS, RECREATIONAL WATER PARKS, OR INSTALLATIONS IN WHICH HUMAN CONTACT WITH PUMPED MEDIA IS A COMMON OCCURRENCE.
SPECIFICATION
- DISCHARGE …………………………..2” NPT, Female, Vertical, Bolt-on Flange
- LIQUID TEMPERATURE …………..104°F (40°C) Continuous
- VOLUTE ………………………………….Cast Iron ASTM A-48, Class 30
- MOTOR HOUSING …………………..Cast Iron ASTM A-48, Class 30
- SEAL PLATE ………………………….Cast Iron ASTM A-48, Class 30
- IMPELLER:
- Design …………………Vortex, open, with pump out vanes on back side. Dynamically balanced, ISO G6.3
- Material ……………….85-5-5-5 Cast Iron
- SHAFT …………………………………..416 Stainless Steel
- SQUARE RINGS ………………………Buna-N
- HARDWARE ……………………………300 Series Stainless Steel
- PAINT ……………………………………..Air Dry Enamel
- SEAL:
- Design …………………Single Mechanical
- Material ………………..Carbon/Ceramic/Buna-N
- CORD ENTRY ………………………….20 ft. (6m) Cord. Quick connect custom molded for sealing and strain relief
- SPEED ……………………………………..3450 RPM (Nominal)
- UPPER BEARING …………………….Single Row, Ball, Oil lubricated
- Load …………………….Radial
- LOWER BEARING ……………………Single Row, Ball, Oil lubricated
- Load …………………….Radial & Thrust
- MOTOR:
- Design …………………NEMA L -Single Phase, NEMA B -Three phase Torque Curve, Oil Filled, Squirrel Cage Induction
- Insulation ……………..Class B /Class F on selected models
- SINGLE PHASE ……………………….Permanent Split Capacitor (PSC) Includes Overload Protection in Motor
- THREE PHASE ………………………..200-240/480 is Tri-Voltage. 600V. Requires Overload Protection to be included in control panel
- OPTIONAL EQUIPMENT …………..Seal Material, Impeller Trims, Additional cord, Normally Closed Temperature Sensors with cord for 3 phase pumps (Requires relay in control panel).
- RECOMMENDED:
- Accessories …………..Break Away Fitting (BAF) Check Valve Control Panel
- Seal Kit PN ………….130181
- Service Kit PN ……….130208
Performance Curve
1.5 & 2.0HP, 3450RPM, 60Hz
Testing is performed with water, specific gravity 1.0 @ 68º F @ (20ºC), other fluids may vary performance
- USA: 937-778-8947
- Canada: 905-457-6223
- International: 937-615-3598
WARNING:
CANCER AND REPRODUCTIVE HARM –
WWW.P65WARNINGS.CA.GOV
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>