AURA CHOICE INTERIOR OPT7 LED Strip Lights Installation Guide
- June 4, 2024
- Aura
Table of Contents
AURA CHOICE INTERIOR OPT7 LED Strip Lights
DISCLAIMER
OPT7 Lighting is not liable for damages or personal injuries while installing this product. The Installation Guide is intended as assistance to reduce setup time. OPT7 Lighting assumes no responsibility for improper installation. If you are unfamiliar with your vehicle or inexperienced with aftermarket upgrades, please seek professional assistance.
NEED SUPPORT?
Scan for tutorial videos, troubleshooting tips, and more.
MAIN COMPONENTS
INSTALLATION
STEP 1
Decide where to locate the light strips and ensure the wiring has enough length for the control box to be installed in the desired location.
STEP 2
- Secure the control box in the desired location.
- But ensure that the protruding IR sensor and Sound sensor are placed in a direct line of contact with the remote.
- Ensure the control box is safely and securely hidden from exposing elements of moisture.
STEP 3
Thoroughly clean the surface where you plan on mounting the LED strip with rubbing/isopropyl alcohol. (This part is essential for a firm and long-lasting placement. A dirty surface will prevent the strip from attaching firmly.) Tear off the 3M Double-sided tape and firmly press the LED strip to the mounting area and hold for 3 seconds.
STEP 4
Using the included E-Z Remote, select your desired color or pattern.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>