Genius NX-8000S BT Wireless Bluetooth Silent Mouse

The frequency band of the product is 2400 MHz – 2483.5 MHz and the radio- frequency transmitted maximum power (equivalent isotropic radiated power, EIRP) less than 10 mW. Operating temperature: 0 ~ 40℃ Product storage conditions: Temperature: -20℃ ~ 50℃ / Humidity: 5%~ 85%

Remove the battery cover from the mouse

Install one AA battery into the mouse

Open the power switch

Plug the receiver into your computer

Hardware Installation

1. Install one AA battery into the mouse.
2. Remove the Pico receiver from the mouse and plug it into a USB port on your PC.

Mouse mode and Indicator LED

1. 2.4G Mode (4): Red light (6) Flashes 3 times quickly.
2. BT1 Mode (4): Blue light (6) Flashes 3 times quickly. (Bluetooth pairing name: Genius BluetoothM1).
3. BT2 Mode (4): Red and blue lights (6) flash 3 times alternately. (Bluetooth pairing name: Genius BluetoothM2).
4. Low battery indicator (6): Red light flashes once a second.

Mouse 3 keys and buttons

1. Left Button (1): Provides traditional mouse functions like click, double click and drag.
2. Magic-Roller (2): Press the Magic-Roller to surf the Internet and Windows documents.
3. Right Button (3): Provides traditional mouse click functions.
4. Power button (5): ON / OFF.
5. Mode switching button (4): 2.4G / BT1 / BT2.
6. USB receiver (7)

2.4GHz / BT1 / BT2 Mouse mode switching and pairing

FCC STATEMENT

This equipment has been tested and found to comply with the limits of a Class B digital device, according to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installations. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient / Relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference. and
2. this device must accept any interference received, including interference that may cause undesired operation.

FCC CAUTION: Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the user’s authority to operate
the equipment.
RF exposure warning: The equipment complies with RF exposure limits set forth for an uncontrolled environment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

Disclaimer
The following does not apply to any country where such provisions are inconsistent with local law: KYE Systems Corp. makes no warranties to this documentation, whether expressed or implied. All material is provided “as is”. This includes but is not limited to, any implied warranties of merchantability and fitness for a particular purpose. The information covered in this document is subject to change without notice.
KYE Systems Corp. assumes no responsibility for any errors that may appear in this document. All brand names mentioned in this manual are trademarks or registered trademarks of their respective companies. Copyright KYE Systems Corp. All rights reserved.

Declaration of Conformity

• The following designated product: M/N: NX-8XXXX BT Series is herewith confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to the Radio Equipment Directive (2014/53/EU). For the evaluation regarding the electromagnetic compatibility, the following standards were applied:
• EN 300 328 / EN 301 489-1 / EN 301 489-17 / EN 62479 / EN 62368-1
• This declaration is prepared for the manufacturer: KYE SYSTEMS CORP.

• 492, Sec. 5, Chongxin Rd., Sanchong Dist., New Taipei City 241017, Taiwan (R.O.C.)

CONTACT

• KYE Systems Corp.

• 492, Sec. 5, Chongxin Rd., Sanchong Dist.,

• New Taipei City 241017, Taiwan
• Tel: 886-2-2995-6645 Fax: 886-2-2995-6649
• Email: support@geniusnet.com.tw. (Tech. Support)
• http://www.geniusnet.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>