cecotec IronHero 1800 Vital Garment Steamer Instruction Manual

IRONHERO 1800 VITAL
Plancha vertical/ Garment steamer Instruction manual

PARTS AND COMPONENTS

Fig. 1

1. Stainless-steel soleplate
2. Soleplate bracket
3. Handle
4. Bottom cover
5. Water tank
6. Tank base
7. Indicator light
8. Handle cover
9. Trim
10. On/Off button
11. Steam button
12. Brush
13. Cable

NOTE:
the graphics in this manual are schematic representations and may not exactly match the device.

BEFORE USE

• This appliance is packaged in a way as to protect it during transport. Take the device out of its box and remove all packaging materials. You can keep the original box and other packaging elements in a safe place. This will help you prevent damage to the device when transporting it in the future. In case the original packaging is disposed of, make sure all packaging materials are recycled accordingly.
• Make sure all parts and components are included and in good conditions. If there is any piece missing or in bad conditions, contact the official Cecotec Technical Support Service immediately.

Box content

• Garment steamer
• Fabric brush
• Instruction manual

OPERATION

Before use

1. Remove any labels or protective covers from the steam head and straighten the power cord before use.
2. Emit steam for a few minutes before first use to remove any impurities and odours resulting from the manufacturing process.
3. To avoid overloading the circuit, do not connect the appliance to a socket that is shared by several appliances, e.g., a multi-socket adaptor.
4. When opening the box, make sure that all parts and components are included and in good condition.

Installation and use

• Take the device out of its box and remove all packaging materials.
• Turn the water tank to the unlocked position, remove it, open the lid, and fill it to at least 1/3 of its capacity; then, reinstall it.
• Hold the garment steamer by the handle with one hand and install the fabric brush on the steam head with the other hand. Tighten the tab of the attachment.
• Plug the appliance into the mains and press the on/off button: the indicator light will flash blue and the garment steamer will start preheating. When the indicator light stops and preheating is complete, you can start using the iron. Press the steam button to activate the steam emission and press it again to deactivate it. Unplug the iron after use.

The iron includes an automatic shut-off system that is activated after 8 minutes of inactivity.
Press the steam or the on/off button to restart the garment steamer.
Ironing

• The garment steamer is very easy to use and is suitable for ironing creased clothes and curtains, as well as for refreshing decorative fabrics. It can also be used for many knitwear items.
• Note: the appliance is designed for ironing vertically hung garments. Do not use the appliance for ironing horizontally laid garments.
• Check that the back of the fabric is breathable to prevent steam from building up on the garment and making it wet.
• Check the pockets to make sure they are empty.
• Check the back of the clothes for objects easily damaged by steam.
• Do not apply steam on or near the metal parts of the garment to avoid discolouration.
• When pressing the steam button, it is normal to feel a vibration and hear a slight buzzing sound.
• When ironing, carefully pass the brush up and down over the creases in the garment.
• If you do not use the brush, keep the iron head at least 5 cm away from the garment.
• If the buzzing sound becomes louder and the iron does not emit steam, it means that the water tank needs to be filled.

After use

1. Before switching off the appliance, wait 15 seconds for the steam to dissipate. Then, press the on/off button or unplug the appliance.
2. Remove the tank, open the cap, and empty the tank into a bucket or sink.
3. Place the appliance upright on a flat table and allow it to cool completely before storing it.

CLEANING AND MAINTENANCE

1. Remove the brush from the head and clean it with a damp cloth.
2. Do not use aggressive or corrosive cleaners or solvents.
3. Do not put the garment steamer in water or any other liquid.
4. Do not strike the iron or attempt to bend it.
5. Do not attempt to disassemble the device yourself.
6. Empty the water tank after each use.
7. Do not store the appliance in damp places.
8. Keep the appliance away from heat sources and do not expose it to direct sunlight.
9. Always make sure that the steam outlets are not obstructed and clean them if necessary.
10. Store the iron vertically on a flat surface such as a cupboard.

TROUBLESHOOTING

mains
socket.
The iron does not emit steam| Make sure the water tank is correctly assembled.
Check the water level in the tank.
Press the steam button harder.
The water tank leaks| Make sure that the water level does not exceed the maximum level.
Make sure the lid is properly closed.
Follow the instructions in the manual and always keep the garment steamer in an upright position.
The iron emits a loud buzzing sound| Make sure the water tank is correctly assembled.
Check the water level in the tank.
It is normal for air to be present in the water pipe after a long period of inactivity.
The metallic parts of the garments become discoloured| Do not pass the iron directly over metal parts.
Use the steam function sparingly if the garment has metallic details.

TECHNICAL SPECIFICATIONS

Product reference: 08510
Product name: IronHero 1800 Vital
Voltage: 220-240 V
Frequency: 50-60 Hz
Power: 1800 W
Technical specifications may change without prior notification to improve product quality.
Made in China | Designed in Spain

DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES

**** This symbol indicates that, according to the applicable regulations, the product and/or batteries must be disposed of separately from household waste. When this product reaches the end of its shelf life, you should dispose of the cells/ batteries/ accumulators and take them to a collection point designated by the local authorities.
Consumers must contact their local authorities or retailer for information concerning the correct disposal of old appliances and/or their batteries.
Compliance with the above guidelines will help protecting the environment.

TECHNICAL SUPPORT AND WARRANTY

Cecotec shall be liable to the end user or consumer for any lack of conformity that exists at the time of delivery of the product under the terms, conditions, and deadlines established by the applicable regulations.
It is recommended that repairs be carried out by qualified personnel.
If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact the official Cecotec Technical Support Service at +34 963 210 728.

COPYRIGHT

The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The contents of this publication may not, in whole or in part, be reproduced, stored in a retrieval system, transmitted, or distributed by any means (electronic, mechanical, photocopying, recording or similar) without the prior authorization of CECOTEC INNOVACIONES, S.L.

www.cecotec.es
Cecotec Innovaciones S.L.
Av. Reyes Católicos, 60
46910, Alfafar (Valencia), Spain
YV_01230706

Documents / Resources

| cecotec IronHero 1800 Vital Garment Steamer [pdf] Instruction Manual
IronHero 1800 Vital Garment Steamer, IronHero 1800, Vital Garment Steamer, Garment Steamer, Steamer
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>