StarTech AS445C 4 Port Multi Gigabit PoE+/PoE++ Injector Extensores Ethernet User Guide

StarTech AS445C 4 Port Multi Gigabit PoE+/PoE++ Injector Extensores

Ethernet

4-Port 802.3bt 90W 5Gbps PoE Injector

Product Diagram

AS445C-POE-INJECTOR

• Front View

• Back View

• Top View

*Product may vary from image

• Connect a Network Cable to a PD (Powered Device)
  Note: 160W shared power allocation across all PoE ports.

• Supports 5 Gbps, 2.5 Gbps, 1 Gbps, 100 Mbps, and 10 Mbps

2| Data Ports x 4 (Data Input)|

• Connect a Network Cable to a Network Device
• Supports 5 Gbps, 2.5 Gbps, 1 Gbps, 100 Mbps, and 10 Mbps

3| DC Power Port|

• Connect to a Power Source using the included Power Adapter
• Recommended 54 V and 3.3 A. Type M barrel plug, Ø 5.5×2.1×9.5mm

4| Grounding Point|

• Attach a Grounding Wire to the PoE Injector and to an

Earth Ground Connection
Note: A Grounding Wire is typically green or green with a yellow stripe and should be at least 18 AWG.

5| PoE Operation Mode Switch|

• Three positions are available:
  • 802.3bt (default). Operates as a 90W
  • 802.3bt PoE++ type 4 PSE (Power Source Equipment)
• PoH + Legacy. Operates as a 95W PoH (Power over HD- BASE-T) PSE with Legacy function
• Force. Operates as a non-negotiating 4-pair 60W PoE PSE. Useful for PoE devices that lack a proper handshake.
• Warning! Force Mode is intended for PoE PDs only.

6| PoE Usage LEDs|

• Steady Amber. Indicates that the system is consuming over the indicated PoE power budget
• Blinking Amber. Indicates that the system is consuming under the indicated PoE power budget

7| PoE-in-Use LEDs|

• Steady Green. Indicates that the port is providing 802.3bt PoE++/PoH/Force power to the remote powered device
• Steady Amber. Indicates that the port is providing 802.3af/ at PoE/PoE+ power to the remote powered device
• Off. Indicates that no power is being provided to the remote device

8| Power LED| Steady Green. Indicates that power is being supplied to the PoE Injector

Package Contents

• 4-Port PoE Injector x1
• DIN Rail Mounting Kit x 1
• Universal Power Adapter x 1
• Quick-Start Guide x 1

Requirements
For the latest manuals, product information, technical specifications, and declarations of conformance, please visit: www.startech.com/AS445C-POE- INJECTOR

• Phillips head screwdriver

Installation

Warnings!

• Force Mode: Prior to connecting the PSE to a PD, ensure the PD supports 60W PoE through pin 1/2 ( – ), 3/6 ( +), pin 4/5 ( +), and 7/8 ( – ). Otherwise, the PD may be damaged as power is injected without handshaking.
• Prior to powering on the PSE, ensure that a Grounding Wire is connected to the PSE. A Grounding Wire should typically be green or green with a yellow stripe and should be at least 18 AWG.
• Prior to connecting the PSE to a PD ensure that the PD supports the corresponding PoE setting on the PoE Operation Mode Switch to prevent potential damage.
• Power OFF the PoE Injector before adjusting the PoE Operation Mode Switch, and then power it back ON.
• The legacy detection feature identifies the PDs that do not fully follow the
• IEEE 802.3af/at/bt standards and their unique electrical handshakes. This allows the PoE Injector to provide power to those PDs.

Quick-Start Guide

1. Connect an Ethernet Cable from the Source Network Device (i.e., router, modem, or non-PoE switch) to the Data Port(s) on the PoE Injector.
2.  Connect an Ethernet cable to the Corresponding PoE++ Port(s) on the PoE Injector.
3. Connect the other end of the Ethernet Cable used in Step 2 to either a Powered Device (PD), or to a PoE Splitter to separate Data and Power.
4. Plug the included Power Adapter to an AC Outlet and connect it into the DC Power Port. Ensure the Power LED is illuminated.

DIN Rail Installation

1. Insert a Mounting Screw through the Mounting Plate and into the PoE Injector. Using a Phillips Head Screwdriver, tighten the Mounting Screw just enough to catch the thread. (Figure 1)
2. Re-align the Mounting Plate with the Mounting Holes and insert the second Mounting Screw. Alternate between gently driving each Mounting Screw until both are tight.
3. Select the desired PoE Operation Mode before mounting onto the DIN Rail.
4. Mount the PoE Injector by inserting the Mounting Plate at an angle starting from the Top then Push against the DIN Rail. (Figure 2)

Warranty Information

• This product is backed by a two-year warranty.
• For further information on product warranty terms and conditions, please refer to www.startech.com/warranty. Limitation of Liability
• In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

Regulatory Compliance

• Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
• This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
• PHILLIPS® is a registered trademark of Phillips Screw Company in the United States or other countries.

FCC – Part 15

• This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
  in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by StarTech.com could void the user’s authority to operate the equipment.

Industry Canada Statement
This Class A digital apparatus complies with Canadian ICES-003. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support

StarTech.com Ltd.

• 45 Artisans Crescent
• London, Ontario N5V 5E9
• Canada

StarTech.com LLP

• 4490 South Hamilton Road
• Groveport, Ohio 43125
• U.S.A.

StarTech.com Ltd.

• Unit B, Pinnacle 15 Gowerton Road
• Brackmills, Northampton NN4 7BW
• United Kingdom

Documents / Resources

| StarTech AS445C 4 Port Multi Gigabit PoE+/PoE++ Injector Extensores Ethernet [pdf] User Guide
AS445C 4 Port Multi Gigabit PoE PoE Injector Extensores Ethernet, AS445C, 4 Port Multi Gigabit PoE PoE Injector Extensores Ethernet, Multi Gigabit PoE PoE Injector Extensores Ethernet, Gigabit PoE PoE Injector Extensores Ethernet, PoE PoE Injector Extensores Ethernet, PoE Injector Extensores Ethernet, Injector Extensores Ethernet, Extensores Ethernet, Ethernet
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>