INVENTUM GF431 Cool Zone Fryer Instruction Manual
- October 26, 2023
- INVENTUM
Table of Contents
GF431 Cool Zone Fryer
Instruction Manual
COOL ZONE
FRYER
KALTZONE FRIES
instruction manual
Arduino Basic: How to use the Ardui...
Arduino Basic: How to use the Arduino I2C Scanner?
safety instructions
-
Please read these instructions before operating the appliance and retain for future use.
-
The appliance is intended solely for domestic use within the home.
-
Attention! Avoid touching hot surfaces, especially the outside of the appliance when the appliance is in use.
-
Before plugging into a socket, check that the voltage in your home corresponds with the voltage printed on the bottom of the appliance.
-
Never let the power cord of the appliance hang over the edge of a table or counter, touch hot surfaces or become knotted.
-
Never place this appliance on or near a hot gas or electric burner or where it could touch a heated oven or microwave. Do not allow this appliance to touch curtains, wall coverings, clothing, dishtowels or other flammable materials during use.
-
Always use the appliance on a secure, dry, level surface.
-
Never leave the appliance unattended when in use.
-
Always carry out regular checks of the power cord to ensure no damage is evident. Should there be any signs that the cord is damaged in the slightest degree, the entire appliance should be returned to the Customer Service Department. For your own safety, only use the accessories and spare parts from the manufacturer which are suitable
for the appliance. -
For your own safety, only use the accessories and spare parts from the manufacturer which are suitable for the appliance.
-
Always return the appliance after a malfunction, or if it has been damaged in any manner to the Customer Service Department for examination, repair or adjustment as special purpose tools are required.
-
Never unplug it from the socket by pulling on the cable.
-
Always ensure that your hands are dry before handling the plug, switch or power cord.
-
The appliance is not intended to be operated by means of an external timer or a separate remote-control system.
-
This appliance shall not be used by children from 0 to 8 years. This appliance can be used by children over the age of 8 and above if they are continuously supervised.
-
This appliance can be used by people with reduced physical, sensory or mental capabilities or lack of experience or knowledge, if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Keep the appliance and its cord out of reach of children aged less than 8
years. -
Cleaning and maintenance shall not be made by children.
-
Children should be supervised to ensure that they do not play with the appliance.
-
Unplug the appliance as soon as you have finished using it and when you are cleaning it.
-
Ensure the lid and the reservoir do not contain any water before filling the fryer with oil.
-
Should you decide not to use the appliance anymore, make it inoperative by cutting the power cord after removing the plug from the socket. We also recommend making all potentially dangerous parts of the appliance harmless, particularly for children who might be tempted to play with it.
-
Never use the appliance if it is not working properly, or if it has been damaged. Any intervention other than cleaning and normal maintenance by the customer must be carried out by an approved service center.
-
Never immerse any part of the main body, lid, or power cord, and plug in water or any other liquid to protect against electrical hazards.
-
This appliance is intended to be used in households and similar applications such as: – staff kitchen areas, in shops, offices, and other working environments;
– by clients in hotels, motels, and other residential type environments; – Bed and Breakfast type environments – farmhouses. -
If the appliance is used for other purposes than intended or is it not handled in accordance with the instruction manual, the full responsibility for any consequences will rest with the user. Any damages to the product or other things are not covered by the warranty.
appliance description
1. Heating element
2. Lid
3. Basket with handle
4. Exterior
5. Handle – exterior
6. Reset-button| 7. Storage for the power cord
8. Control lamp – red
9. Thermostat button
10. Thermostat lamp – green
11. Reservoir – enameled
---|---
before the first use
Before you use the appliance for the first time, please do as follows:
Carefully unpack the appliance and remove all the packaging material. Keep the
material (plastic bags and cardboard) out of reach of children. Check the
appliance after unpacking for any visible damage, possibly from
transportation.
Place the appliance on a stable and heat-resistant surface. Remove the lid and
the basket. Take out the heating element by pulling it straight up and also
remove the reservoir.
Clean the lid, the basket, and the reservoir with warm soapy water. Dry the
parts thoroughly. Make sure that the parts are completely dry.
Wipe the exterior with a damp cloth and dry thoroughly. Assemble the fryer.
Fill the reservoir with liquid frying oil between the minimum and maximum
level, approx. 3 liters. Ensure that you don’t add less than the minimum
capacity or over the maximum capacity.
Inside the reservoir, you will find two lines that indicate the minimum and
maximum levels.
Attention: This fryer may only be used with liquid frying oil.
Never use hard fats.
The handle of the basket can be stored in the basket by folding it in.
Squeeze the two handle wires together and push the handle forwards over the
locking clip.
Only store the handle when the oil is fully cooled down.
Ensure the handle is folded back before operating the fryer again!
For the best result in a cool zone fryer, always fry without using the
lid.
frying
Check that the voltage in your home corresponds with the voltage printed on
the bottom of the appliance and plug the fryer in.
Check if the handle is folded back and turn the fryer on by plugging it in.
The red power indicator will light up. Turn the thermostat button clockwise to
the required temperature.
The green thermostat lamp will light up.
Note: always remove the handle out of the oil before heating, otherwise
the plastic handle will melt.
As soon as the desired temperature is reached, the green thermostat lamp goes
out. The thermostat and the thermostat lamp will toggle on and off as the
thermostat in the fryer maintains the correct temperature.
The fryer is now ready to use.
Add the desired quantity of food to the basket. Do not add too much food at
one time (never more than 2/3).
Food should be as dry as possible to reduce the amount of water getting into
the oil. Shake the ice off of frozen products above the sink.
Lower the basket slowly into the oil. If you lower too fast the oil can
splash.
Always fry without the lid. This prevents the fryer from overheating and an
automatic shutdown. At the same time it ensures a crispier result.
When the food is deep-fried, lift the basket out of the oil.
Carefully shake the excessive fat of and hang the basket on the hook in the
reservoir to drain the oil. Take the basket out of the fryer and serve the
food.
Place the basket back.
after frying
When you have finished frying, turn the fryer off by turning the thermostat
button anti-clockwise completely and pull the plug from the socket.
Only store the handle when the oil is fully cooled down. Ensure the handle is
folded back before operating the fryer again! Let the fryer cool down for
several hours before moving the fryer. If you want to move the fryer always
use both hands. picture. Use a blunt object to press the reset button in the
small round opening.
On the front of the heating, you will see a safety switch. If you pull out the
heating element while the fryer is still on, the safety switch will shut the
element of. This also means that you can not use the heating element when it
is not placed or not placed correctly in the retaining slots.
tips
- Note: during and after frying it is possible that drops of condensated waterfall into the hot oil. The hard noise you can hear is the reaction of the water with the oil/fat and is normal. It does not influence the use of the fryer.
- Note: Battered or coated food, like fish, may stick to the basket. To prevent this, lower the basket and than place the food in the fryer.
- Never salt the product before or during cooking. This will soil the oil.
- For the best results, it is advisable not to fry with a full basket, a maximum of 450 to 500 grams. Fry frozen products in even smaller portions, because they contain more water and cause the oil to cool down too much.
- If you make your own fries, dry them thoroughly after washing to make sure there will be no water in the oil. Fry the fresh fries in two times. The first time (pre-cooking) 5 to 10 minutes on 170 degrees. Lift the basket, let the oil drain and let the fries cool down for several minutes. For the second time turn the temperature control (cooking) to 190 degrees and cook the fries in 2 to 4 minutes. Lift the basket after frying and let the oil drain.
cleaning & maintenance
FILTERING OR CHANGING LIQUID FRYING OIL
Before changing or filtering the oil, always unplug the fryer and let it cool
down completely. The liquid frying oil can be used longer if you filter it
regularly. Replace the liquid frying oil regularly, after 8 to 12 times.
Filter the liquid frying oil only when it is cold. Pour the oil in a clean
bowl. Clean the reservoir with hot water and a mild detergent or in the
dishwasher. Thoroughly dry the reservoir. Pour the liquid frying oil back in
the reservoir through a fine sieve. Check each time if the level of the liquid
frying oil is between the minimum and maximum level. When replacing the oil,
follow the same steps as described before. Liquid frying oil can be poured
back in the bottles. Never wash away fat or oil through the sink.
CLEANING THE FRYER
Before cleaning always unplug the fryer and let it cool down completely.
Remove the basket, the element and the reservoir out of the fryer. Clean the
lid, the basket and the reservoir in the dishwasher or with hot water and a
mild detergent. Ensure that the parts are dried thoroughly after cleaning.
Clean the exterior of the fryer with a damp cloth and when needed a mild
detergent.
Never use any abrasives! Never immerse the heating element, power cord or
plug in water or other liquids.
safety
Your fryer is provided with double safety, a reset button and a safety switch.
The fryer is provided with an overheating safety which automatically shuts the
fryer off when overheating. Remove the plug from the outlet and allow the
fryer to cool down completely. You can switch the fryer on again when you push
in the reset button on the back in the storage compartment. See 6 on the
Legislation requires that all electrical and electronic equipment must be
collected for reuse and recycling. Electrical and electronic equipment marked
with the symbol indicating a separate collection of such equipment must be
returned to a municipal waste collection point.
Inventum Huishoudelijke
Apparaten B.V.
Meander 901 6825 MH Arnhem
T 0800 -4583688
info@inventum.eu
www.inventum.eu
facebook.com/inventum1908
youtube.com/inventum1908
GF431/04.0620
Modifications and printing errors reserved
References
- Inventum Huishoudelijke Apparaten - Altijd 5 jaar garantie!
- Inventum Huishoudelijke Apparaten - Altijd 5 jaar garantie!