Cruise CRPP VO2.48 DLS User Manual

: June 17, 2024
: DLS

Cruise CRPP VO2.48 DLS

Cruise-CRPP-VO2-48-DLS-PRODUCT

Product Information

Specifications
- Model: DLS Cruise CRPP-VO2.44/48
- Manufacturer: DLS Sweden
- Email: info@dls.se.
- Website: www.dls.se.
Included Parts
- 2pcs Midrange speakers
- 4pcs Adhesive foam rings
- 4pcs Adhesive foams for wrapping
- 4pcs Terminal crimp connectors
- 2pcs Midrange adaptor cable bar ends (marked with MID-C)
- 2pcs Midrange adaptor cable (marked with MID-A)
- 2pcs Midrange adaptor cable (marked with MID-B)
- 1pc Pry tool
- 1pc Manual
Declaration of Conformity
- DLS Cruise speakers for vehicles are manufactured per the EU directive EEC 95/54 (72/245/ EEC) and are marked with the approval number.
- They are also marked by the WEEE-directive 2012/19/EC. The products are also produced following the EU RoHS directive 2015/863/EU.

Product Usage Instructions

Pre Installation
- Before you start the process of replacing speakers, disconnect and secure the negative terminal from your battery/power source. This will prevent the risk of damaging yourself or the products.
- Place the disconnected terminal in a secure and isolated location away from any possible connection belonging to the battery/power source system.
Mounting Info
- Some sound systems may vary in size of the door speaker. Make sure that your vehicle has the same speaker size as this speaker before you start the assembly.
- Bolts size can vary between 7 & 8 mm. Torx size can vary between T20 & T25.
General Door Panel Dismounting
- This is a generic mounting instruction. The approach is similar to all of the described car models. Some screws and clips may be placed differently depending on your car model (see specific car models on the following page).
Installation
- Dismount door panel
- Change speakers
- Reassemble door panel
- Cable adaptors
Running-in Time
- It is recommended to allow a running-in time for the speakers to reach their optimal performance. This running-in time can vary but is generally around 10-20 hours of usage.
DLS Support
- If you have any questions or need further assistance, you can contact DLS support through the following channels:
- Email: support@dls.se.
- Phone: +46 123456789

FAQs

Q: What should I do if I feel uncertain about the installation process?
- A: If you feel uncertain about the installation process, it is recommended to seek the help of an experienced installer or a car audio dealer to ensure the correct installation of the speakers.
Q: How long is the warranty for this speaker?
- A: The warranty for this speaker is covered depending on the conditions in the country where it is sold. Please refer to the warranty terms and conditions provided with the product for more information.
Q: What should I do if I need to return the speaker for service?
- A: If you need to return the speaker for service, please include the original dated receipt with the product. This will help facilitate the service process.

Welcome to DLS!

Thank you for buying a DLS Cruise CRPP-VO2.44/48. For us, it’s all about the sound experience.
We care deeply about sound and construction quality. For your experience to be as optimal as possible, you must read this manual, preferably before you start your installation.
Keep the manual in a safe and accessible place for future reference.
Your speakers must be installed correctly to work as intended. Make sure you have all the necessary tools nearby before starting and that you are completely confident in how to proceed.
If you feel the slightest uncertainty; feel free to take the help of an experienced installer or a car audio dealer.

Warranty

This speaker is covered by warranty, depending on the conditions in the country where it is sold.
If the speaker is returned for service, please include the original dated receipt with the product.

General

Some sound systems may vary in size of the installed speakers.
Make sure that your vehicle is the same size as this speaker before you start the assembly.
This is a generic mounting instruction.
The approach is similar to all of the described car models. Some screws and clips may be placed differently depending on your car model.

DECLARATION OF CONFORMITY

DLS Cruise speakers for vehicles are manufactured in accordance with the EU directive EEC 95/54 (72/245/ EEC) and are marked with the approval number.
They are also marked following the WEEE-directive 2012/19/EC. The products are also produced per the EU RoHS directive 2015/863/EU.

Included parts

Included products:
- 2pcs Midrange speakers
Included in the box:
- 4pcs Adhesive foam rings
- 4pcs Adhesive foams for wrapping
- 4pcs Terminal crimp connectors
- 2pcs Midrange adaptor cable bar ends (marked with MID-C)
- 2pcs Midrange adaptor cable (marked with MID-A)
- 2pcs Midrange adaptor cable (marked with MID-B)
- 1pc Pry tool
- 1pc Manual

Pre-installation

Disconnect Battery

Before you start the process of replacing speakers, disconnect and secure the negative terminal from your battery/power source. This will prevent the risk of damaging yourself or the products.
Place the disconnected terminal in a secure and isolated location away from any possible connection belonging to the battery/power source system.

Mounting info

Some sound systems may vary in size of the door speaker. Make sure that your vehicle has the same speaker size as this speaker before you start the assembly
Bolt size can vary between 7 & 8 mm
Torx size can vary between T20 & T25

General door panel dismounting

This is a generic mounting instruction. The approach is similar to all of the described car models. Some screws and clips may be placed differently depending on your car model (see specific car models on the following page).

$Cruise-CRPP-VO2-48-DLS-FIG-1 $2$$ $Cruise-CRPP- VO2-48-DLS-FIG-1 $3$$

Installation

Dismount door panel

Dismount the door by removing the cover of the door panel.
Hint: Use plastic PRY tools to avoid marks on the panels or damaging the plastic clips.
1. Remove the cover behind the door handle. Use the PRY tool. Behind the cover are two T20/T25 screws. Unscrew them. Move the door panel upwards.
- Hint: Sometimes it’s easier to remove the window control panel and unplug the harness, before lifting the door panel.

S90/V90: Remove the trim panel by using a PRY tool. Start at

and move towards
Behind the trim panel are two 7mm bolts located. Remove screw.
Remove the window control panel using the PRY tool. Unplug the harness. T20/T25 screw is located under the panel. Remove screw.
T20/T25 screw can be seen from under the armrest, or there can be a cover that needs to be removed. Move the door panel upwards.

Remember: Use the PRY tools to avoid marks on the panels or damaging the plastic clips.

Remove the window control panel with the PRY tool. Behind the control panel is one T25 screw located. Unscrew it. Unplug the harness. Start by removing the cover by the speakers. Use a PRY tool.
Start on the inside of the cover. Work your way towards the door handle.
Push the trim in the direction of the arrow. (There is a hook behind the trim) Behind the trim is a 7mm bolt. Unscrew the bolt. Unplug the harness.
Under the armrest is one T25 screw. Unscrew it. Move the door panel upwards.
Remove the window control panel with the PRY tool. Behind the control panel is one T20/T25 screw located. Unscrew it. Unplug the harness.
Under the armrest is one T20/T25 screw. Remove the cover. Unscrew it.
At the bottom of the panel is a 7 or 8-mm bolt. Unscrew it. Move the door panel upwards.
At the bottom of the panel are two 7 or 8-mm bolts. Unscrew theme.
Under the armrest are two T20/T25 screws. Unscrew them.
Behind the door handle is a rubber cover. Remove the cover and under it is a 7 or 8mm bolt. Unscrew the bolt. Move the door panel upwards.
- Hint: Sometimes it’s easier to remove the window control panel and unplug the harness, before lifting up the door panel.

There are several electric and mechanical connectors on the backside of the door panel. Disconnect the cables to the door handle, speaker, window control and door light.

Change speakers

Remove the midrange by unscrewing the T20 Torx. Unplug the speaker harnesses.
Plug in the new adaptor cable. Make sure to use the correct cable.
Adaptor cable (MID-B) High-performance
Adaptor cable (MID-C) Bowers & Wilkins or Harman Kardon system.
Use the OEM screws to fix the new DLS midrange.
Make sure to use adhesive foam pads to wrap the adaptor cables to avoid rattling from the door panel.
Make sure that the new DLS midrange is properly fixed and don’t touch the surrounding plastic.
HINT: DLS recommends adding sound-deadening material on the door panel before assembling.

Reassembly door

$Cruise-CRPP-VO2-48-DLS-FIG-1 $15$$ Connect all plugs to the door cover, reconnect the unlocking device, place the door cover from the top, by the window seal and push it gently down.
Make sure the clips are in place and can engage.
Give the door panel a push by the hand to attach to the clips. Mount and fasten all screws to the correct places.
Make sure that no screws or clips are left over.
Reconnect the battery/power source terminal.
Now it’s time to play some good music and enjoy!

Cable adaptors: MID-A & MID-B

$Cruise-CRPP-VO2-48-DLS-FIG-1 $16$$

Note! Adaptor cable marked with MID-A shall be used when replacing High-performance midrange.
Note! Adaptor cable marked with MID-B shall be used when replacing Bowers & Wilkins or Harman Kardon midrange.

Running-in time

Allow the speaker to play for at least 15-20 hours to perform at its possibly best.
This run-in can be made with tone sweep or with just music.
Start at a moderate volume and increase the volume step by step during the running-in period.
After the 15-20 hour run in session, the performance and characteristics will be in the correct condition.

DLS Support

For technical assistance, ask your car audio dealer where the product was sold or the distributor in your country.
You can always contact the DLS Help desk in Sweden at e-mail: info@dls.se.
Information can also be found on our WEB- site www.dls.se.
We follow a policy of continuous advancement in development. For this reason, all or part of the specifications and designs may be changed without prior notice.

Specifications

Art. no CD-CRPP-VO2.44
- Woofer 4” / 100mm with glass fibre cone
- RMS Power 60W
- MAX Power 120W
- Impedance 4 Ohm
- Sensitivity 86dB 1W/1M
- Freq. range 80 – 8000Hz
Technical specifications
- Voice Coil Material CCAW voice coil/ Kapton former
- Basket Glass Fibre Reinforced ABS
- Magnet Ferrite
- Cone Glass fibre
- Suspension Rubber
Electro-Acoustic Parameters
- Re 3.1 Ohm
- Fs 99Hz
- Mms 7.36gr
- Cms 0.296
- Vas 1.29L
- Qts 0.75
- Qes 0.95
- Qms 3.54
- Bl 4.10T.m
- Spl 86dB 1W/1M
- Sd 54cm²
Art. no CD-CRPP-VO2.48
- Woofer 4” / 100mm with glass fibre cone
- RMS Power 60W
- MAX Power 120W
- Impedance 8 Ohm
- Sensitivity 87dB 1W/1M
- Freq. range 80 – 8000Hz
Technical specifications
- Voice Coil Material CCAW voice coil/ Kapton former
- Basket Glass Fibre Reinforced ABS
- Magnet Ferrite
- Cone Glass fibre
- Suspension Rubber
Electro-Acoustic Parameters
- Re 7.2 Ohm
- Fs 97.5Hz
- Mms 5.55gr
- Cms 0.436
- Vas 1.90L
- Qts 0.76
- Qes 0.96
- Qms 3.67
- Bl 5.18T.m
- Spl 87dB 1W/1M
- Sd 54cm²

Impedance VS Frequency

$Cruise-CRPP-VO2-48-DLS-FIG-1 $18$$

Dimensions

$Cruise-CRPP-VO2-48-DLS-FIG-1 $19$$

Compatible car models

The DLS Cruise CRPP-VO2.44 & CRPP VO2.48 midrange speakers are developed to be installed in the front door of Volvo car models.

DLS Cruise CRPP-VO2.44 compatible car models

Car Model Year Front speaker Rear speaker
- Volvo S60/V60 2018-Present CRPP-VO2.44*
- Volvo S90/V90 2016-Present CRPP-VO2.44*
- Volvo XC40 2017-Present CRPP-VO2.44*
- Volvo XC60 2017-Present CRPP-VO2.44*
- Volvo XC90 2014-Present CRPP-VO2.44*

Disclaimer: Only compatible with Harman/Kardon and B&W sound systems.

DLS Cruise CRPP-VO2.48 compatible car models

Car Model Year Front speaker Rear speaker
- Volvo S60/V60 2018-Present CRPP-VO2.48**
- Volvo S90/V90 2016-Present CRPP-VO2.48**
- Volvo XC40 2017-Present CRPP-VO2.48**
- Volvo XC60 2017-Present CRPP-VO2.48**
- Volvo XC90 2014-Present CRPP-VO2.48**

Product markings

The crossed-out wheelie bin symbol means that the product, literature and packaging included must be taken to a separate collection at the end of their working life.
Do not dispose of these products as unsorted municipal waste: take them for recycling. For info on your nearest recycling point, check with your local waste authority.
This product has been granted the CE certification mark to show that the product follows the health, safety, and environmental protection standards for products sold within the European Economic Area (EEA).
DLS products comply with the relevant provisions of the RoHS Directive for the European Union. In common with all Electrical and Electronic Equipment (EEE) the product should not be disposed of as household waste. Alternative arrangements may apply in other jurisdictions.
DLS is a global partner of the European Mobile Media Association, an organisation that focuses on promoting custom-made mobile media installations to consumers.
We follow a policy of continuous advancement in development. For this reason, all or part of specifications & designs may be changed without prior notice.
We reserve for possible typos and factual or numeric errors that may have been printed on any products, package designs, user manuals and/or other included accessories.